Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 222141 RF Connector features threaded coupling, polypropylene insulator, and bright tin contact finish. Ideal for board mounting with solder termination, this connector is commonly used in various RF applications.
Median Price
$1.960
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Arrow
1+ parts
$0.276
100+ parts
-
1k+ parts
10k+ parts
Newark
$1.320
RS Americas
$1.680
$1.430
Element14
$1.769
$1.504
Farnell
$2.201
Chip1Stop
$2.400
Mouser Electronics
$2.740
$1.970
$1.640
DigiKey
$1.977
$1.649
Powell Electronics
$1.630
$1.420
Master Electronics
$1.580
Verical
$2.306
$2.106
Nova Conductors
$1.372
Component Electronics Inc.
$2.310
$1.730
$1.500
TME
$2.540
$1.870
VNN
Electro Sonic
$1.740
$1.380
$1.260
IBS Electronics
$2.132
$2.090
Sensible Micro Corp
Vyrian
Ampacity Inc.
$0.870
Argo Parts USA
Netroflash
$1.345
Gateway Technologies
$1.221
Singapore Electronics
$1.509
$1.403
$1.343
$1.282
Allen Electronics Distributors
Continental Prestige Electronics
$2.870
$2.280
$1.690
Andel Nordic
$16.420
$11.497
Perfect Parts
Bright tin finish ensures good electrical conductivity and corrosion resistance, making the product more reliable and durable.
Threaded coupling provides a secure and stable connection, reducing the chances of signal loss or interference.
Polypropylene insulator material offers good insulation properties and helps to maintain signal integrity by preventing any interference.
RF connectors are specifically designed for radio frequency applications, ensuring optimal performance and compatibility with communication systems.
Board mounting type allows for easy and secure installation onto circuit boards, making it suitable for various electronic devices.
Solder termination provides a strong and permanent connection, enhancing the overall durability and reliability of the product.
Straight mounting style offers a simple and straightforward installation process, ideal for applications where space is limited or a specific orientation is required.
Other Function RF Connectors 222141 attributes and parameters. Explore more Other Function RF Connectors devices from Amphenol
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mounting Style:
Mounting Type:
Option:
Panel Mount:
Termination Type:
222141 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
1355-14-328-0877, 1355143280877, 8430-47-000-1005, 8430470001005
NIIN
143280877, 470001005
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CGA3E2X7R1H104K080AA
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MM8430-2610RA1
Murata Manufacturing
Murata Manufacturing's MM8430-2610RA1 RF Connector offers low insertion loss of 0.1 dB, high durability with 500 cycles, and a max operating frequency of 6 GHz. Ideal for commercial applications requiring a characteristic impedance of 50 ohm, such as in board mounting for reliable RF connections.
25-7650
Cinch Connectivity Solutions
RF F CONNECTOR;
EPA.00.250.NTN
Lemo Usa
EPA.00.250.NTN by Lemo Usa is a SNAP RF CONNECTOR with POLYTETRAFLUOROETHYLENE insulator, 50 ohm impedance, and 1.5 GHz frequency for BOARD mounting applications. Featuring FEMALE contact gender, SOLDER termination, and VSWR of 1.25, it's ideal for high-frequency electronic connections.
PE4183
Pasternack Enterprises
PE4183 by Pasternack Enterprises is a RF HN CONNECTOR with 50 ohm impedance, gold/nickel finish, and 10 GHz frequency. Ideal for panel mounting in applications requiring high-frequency signal transmission.
82_MMBX-50-0-14/111_NE
Huber+suhner Ag
82_MMBX-50-0-14/111_NE by Huber+suhner Ag is a RF connector with a body length of 0.232 inch, body diameter of 0.327 inch, and max operating frequency of 12.4 GHz. It is used for board mounting in applications requiring a characteristic impedance of 50 ohm and a voltage standing wave ratio of 1.5.
1214-4001
Sv Microwave
1214-4001 by Sv Microwave is a RF SMP connector with 50 ohm impedance, suitable for applications up to 26.5 GHz. Featuring gold shell finish, PTFE insulator material, and female contact gender, it offers durability of 100 cycles. Ideal for semi-rigid cable mounting in high-frequency environments.
1996705-4
TE Connectivity
TE Connectivity's 1996705-4 RF SMPM CONNECTOR features SNAP coupling, stainless steel shell, and right angle mounting. With dimensions of 1.12" x 0.85" x 0.392", it operates b/w -55 to 105°C. Ideal for board mounting applications requiring a male contact gender with screw termination.
920-255P-51P
Amphenol
Amphenol 920-255P-51P RF Connector has 0.432" body diameter, 0.467" depth, and operates up to 6 GHz. With SNAP coupling type, it's a 50 ohm plug connector for boards with male solder termination. Operating from -65°C to 165°C, it ensures VSWR of 2 in various RF applications.
5-1814822-3
TE Connectivity 5-1814822-3 RF Connector has a body diameter of 0.413" and operates at temperatures from -55 to 85°C. With characteristic impedance of 75 ohm, it is suitable for RG 6 cables and supports up to 1 GHz frequency. Ideal for panel mounting applications requiring a male plug connector with nickel finish brass shell.
4710-5007-00
TE Connectivity 4710-5007-00 RF Connector features 0.24" body diameter, 50 ohm impedance, and 1.05 VSWR. Ideal for commercial applications with a max frequency of 28 GHz, this panel-mount connector has a TFE insulator and gold shell finish for reliable performance in temperatures ranging from -65 to 105°C.
11_QMA-50-2-1/133_NE
11_QMA-50-2-1/133_NE by Huber+suhner Ag is a RF connector with characteristic impedance of 50 ohm, operating up to 18 GHz. It features SNAP coupling, PERFLUOROALKOXY/POLYTETRAFLUOROETHYLENE insulator, and BRASS shell material. Ideal for applications requiring high-frequency signal transmission in temperatures ranging from -40 to 85 °C.
PKG.1B.303.CLLD72
PKG.1B.303.CLLD72 by Lemo Usa is a panel mount RF F connector with snap coupling, suitable for cable and panel mounting. It features a polyetheretherketone insulator material, solder termination, and female contact gender. Ideal for applications requiring a straight socket body style in the Other Function RF Connectors category.
MS-147(01)
Hirose Electric
The Hirose Electric MS-147(01) RF connector features a body length of 0.228", insertion loss of 0.8 dB, and dielectric voltage withstand of 100VAC. Ideal for board mounting applications in commercial settings, this female jack connector has a characteristic impedance of 50 ohm and operates up to 6 GHz with gold termination finish.
MS-180(20)
The Hirose Electric MS-180(20) RF Connector features a 0.3 dB insertion loss, 11 GHz max operating frequency, and 1.4 VSWR. Ideal for board mounting applications in electronics with a temperature range of -40 to 85°C. This female connector has a straight receptacle design with liquid crystal polymer insulator material.
1086009-1
Tyco Electronics Amp
RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SURFACE MOUNT; Characteristic Impedance: 75 ohm; Insulator Material: POLYPHENYLENE SULFIDE;
25-146-1000-92
Winchester Interconnect
RF CONNECTOR;
636101111001
Wuerth Elektronik & Kg
Wurth Elektronik 636101111001 RF Connector features 0.3 dB insertion loss, 50 ohm impedance, and 6 GHz max operating frequency. Ideal for board mounting applications in electronics with a temperature range of -40 to 90°C.
73116-0075
Molex 73116-0075 RF Connector features snap coupling, gold shell finish, and 50 ohm impedance. Ideal for cable mounting with right-angle male contact gender termination. Made of polybutylene terephthalate insulator material and phosphor bronze shell material.
20279-001E-01
I-pex
I-pex 20279-001E-01 RF Connector features GOLD OVER NICKEL termination, SNAP coupling, and LIQUID CRYSTAL POLYMER insulator. Ideal for board mounting in applications requiring high-quality male connectors with COPPER ALLOY contacts.
1211-66195-TD
RF SMP CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
222128-10
RF F CONNECTOR; Option: GENERAL PURPOSE; JESD-609 Code: e3; Filter Feature: NO; Panel Mount: YES; Insulator Material: DELRIN/POLYPROPYLENE;
222197
RF F CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Minimum Operating Temperature: -65 Cel; Shell Material: BRASS;
222113
RF F CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Shell Material: BRASS; DIN Conformance: NO; Characteristic Impedance: 50 ohm;
222153
RF F CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; MIL Conformity: NO; Termination Type: CRIMP;
222142
RF F CONNECTOR; Option: GENERAL PURPOSE; DIN Conformance: NO; Insulator Material: POLYTETRAFLUOROETHYLENE; Filter Feature: NO; JESD-609 Code: e0;
222115
RF F CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Termination Contact Finish: TIN; Mating Contact Finish: NOT SPECIFIED;
222121
RF CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Insulator Material: POLYPROPYLENE; Contact Style: COAX; Maximum Operating Frequency: 2 GHz;
222131
RF CONNECTOR; Option: GENERAL PURPOSE; Termination Contact Finish: MATTE TIN OVER NICKEL; Termination Type: SOLDER; Mounting Type: BOARD; Filter Feature: NO;
2221674-1
RF CONNECTOR; Option: GENERAL PURPOSE; No. of Connectors: ONE; No. of Ports: 1; Maximum Operating Temperature (Cel): 165; Body Depth: .16 inch;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved