Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 222113 RF Connector: 50 ohm impedance, 1 GHz frequency, TIN LEAD finish. Used in RF applications for cables with PLUG body style and CRIMP termination. Operating temp -40 to 85°C.
Median Price
$1.732
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$1.380
100+ parts
-
1k+ parts
$1.095
10k+ parts
$1.078
Interstate Connecting
$1.482
$1.194
$1.159
Farnell
$1.940
$1.250
$1.080
Mouser Electronics
$2.010
$1.450
$1.270
$1.180
RS Americas
$2.150
$1.610
$1.290
Newark
$2.370
$1.910
$1.680
DigiKey
$2.460
$1.639
$1.379
$1.265
Element14
$3.570
$2.260
$1.920
Master Electronics
$1.101
$1.010
$0.989
Verical
$1.524
Powell Electronics
$1.410
$1.100
TTI
$1.320
PSC Electronics
DF Sales Co.
$1.530
TME
$1.460
IBS Electronics
$1.544
$1.417
$1.387
VNN
SPM Sales
ACDS - Activité Composants Distribution Service
Bristol Electronics
Inventory MP
Nova Conductors
Eastern End Electronics, LLC
Prism Electronics
Microwave Components, LLC
Ampacity Inc.
$0.710
Allen Electronics Distributors
$1.500
Gateway Technologies
$2.000
$1.780
Singapore Electronics
$2.200
$2.046
$1.958
$1.870
Continental Prestige Electronics
$2.210
$1.630
$1.150
Argo Parts USA
Perfect Parts
Netroflash
Eastek
Assy Fe
The compact body diameter allows for easy installation in tight spaces without sacrificing performance.
The TIN LEAD finish provides excellent conductivity and corrosion resistance, ensuring reliable connections over time.
The shallow body depth makes this connector suitable for applications with limited space available.
The threaded coupling type ensures a secure and stable connection for maximum signal transmission.
The POLYTETRAFLUOROETHYLENE insulator material provides excellent electrical properties and durability for long-lasting performance.
With a maximum operating temperature of 85°C, this connector is suitable for a wide range of environments and applications.
The ability to operate at temperatures as low as -40°C makes this connector ideal for outdoor or harsh environments.
The NICKEL shell finish offers resistance to corrosion and wear, ensuring a long service life for the connector.
The RF F CONNECTOR type is commonly used for RF applications, providing reliable signal transmission.
The cable mounting type allows for easy installation and connection to various types of cables.
The 50 ohm characteristic impedance is suitable for many RF applications, ensuring proper signal matching and transmission.
The BRASS shell material offers a good balance of strength and conductivity, making it an ideal choice for RF connectors.
The CRIMP termination type provides a secure and reliable connection between the connector and the cable.
The MALE contact gender is commonly used in RF applications, ensuring compatibility with other connectors.
The PLUG style allows for easy and quick connections without the need for additional tools.
The STRAIGHT mounting style simplifies installation and allows for a clean and organized setup.
With a maximum operating frequency of 1 GHz, this connector is suitable for high-speed data transmission and RF applications.
Other Function RF Connectors 222113 attributes and parameters. Explore more Other Function RF Connectors devices from Amphenol
Additional Features:
Body Depth:
Body Diameter:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Shell Finish:
Shell Material:
Termination Type:
Total No. of Contacts:
222113 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
2805-01-284-8649, 2805012848649, 4730-00-362-1559, 4730003621559, 4820-27-014-5040, 4820270145040
NIIN
012848649, 003621559, 270145040
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
LM317AEMP/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
M49142/08-0006
Winchester Interconnect
M49142/08-0006 by Winchester Interconnect is a MIL-conformant RF connector with threaded coupling, gold contact finish, and PTFE insulator. It is a plug-type connector for cable mounting in straight orientation, ideal for high-frequency applications requiring secure connections.
5-1814821-1
TE Connectivity 5-1814821-1 RF Connector features SCREW coupling, 75 ohm impedance, and brass shell material. Ideal for commercial applications with a frequency up to 1 GHz. Panel mounted F connector with crimp termination and nickel finish for durability.
A-4JA
Amphenol
A-4JA by Amphenol is a SNAP RF CONNECTOR with 50 ohm impedance and 1.4 VSWR, suitable for applications up to 6 GHz. It features BOARD mounting and SURFACE MOUNT termination, ideal for high-frequency electronic systems requiring reliable signal transmission.
85-1
The Amphenol 85-1 RF Connector features a low insertion loss of 0.8 dB and a voltage standing wave ratio of 1.1, suitable for applications up to 11 GHz. With a snap coupling type and PTFE insulator material, it is designed for use in high-frequency cable connections with a characteristic impedance of 50 ohms. Operating temperatures range from -40°C to 85°C, making it versatile for various environments.
131-0140-0001
Malco Microdot Uk
RF CONNECTOR; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; MIL Conformity: NO; Insulator Material: POLYTETRAFLUOROETHYLENE; Filter Feature: NO;
X.FL-R-SMT-1(02)
Hirose Electric
Hirose Electric's X.FL-R-SMT-1(02) RF Connector features Gold (Au) finish, SNAP coupling, and Liquid Crystal Polymer insulator. Ideal for board mounting in applications requiring male contact gender, it is a straight-style connector suitable for surface mount termination.
GRF1-J-P-08-E-RA-TH1-E
Samtec
The Samtec GRF1-J-P-08-E-RA-TH1-E RF connector has 8 ports, gold-plated contacts, and a dielectric voltage of 700VAC. With a characteristic impedance of 50 ohm, it is ideal for commercial applications requiring high reliability and operating frequencies up to 6 GHz. The right-angle mounting style with solder termination makes it suitable for board mounting in various electronic devices.
302102
RF SMP CONNECTOR; Manufacturer Series: 302102;
GRF1-J-P-04-E-RA-TH1
Samtec's GRF1-J-P-04-E-RA-TH1 RF Connector features threaded coupling, gold over nickel termination, and PTFE insulator. With 50 ohm impedance and 6 GHz frequency, it suits board mounting applications requiring female contact gender in right angle configuration.
1055688-1
TE Connectivity's 1055688-1 RF SSMT CONNECTOR features a gold-plated contact finish with nickel barrier, SNAP coupling type, and polyphenylene sulfide insulator. With an insertion loss of 0.15 dB and VSWR of 1.4, it is ideal for applications requiring a durable male plug connector with a characteristic impedance of 50 ohm, operating up to 6 GHz.
127-0693-001
Bel Fuse
Bel Fuse 127-0693-001 RF Connector features 5000000000 ohm Insulation Resistance, 0.12 dB Insertion Loss, and 700VAC Dielectric Withstanding Voltage. Ideal for RG-405 cables in applications requiring a durable, high-frequency connector with a max operating frequency of 40 GHz.
1621-60050
Sv Microwave
1621-60050 by Sv Microwave is a RF 2.4mm connector with threaded coupling, suitable for board mounting. Featuring a characteristic impedance of 50 ohm and a max operating frequency of 50 GHz, it is designed for high-frequency applications requiring reliable signal transmission in environments ranging from -65°C to 165°C.
SMP-MSLD-PCR
The Amphenol SMP-MSLD-PCR RF connector features a dielectric voltage of 700VAC, gold termination finish, and liquid crystal polymer insulator. Ideal for applications requiring a 50 ohm characteristic impedance, it operates up to 12 GHz with a VSWR of 1.2. Suitable for commercial use in board-mounted systems, offering durability with 500 mating cycles.
R110.081.020
Radiall S A
Radiall S A R110.081.020 RF MMCX Connector features 50 ohm impedance, 6 GHz frequency, and 500VAC dielectric voltage for high-performance RF applications. With POLYTETRAFLUOROETHYLENE insulator and GOLD finish, it ensures durability in temperatures ranging from -55 to 155 °C. Ideal for RG-178 cable termination with FEMALE contact gender in straight plug style.
R222151000
The Radiall S A R222151000 RF SMP Connector features a low insertion loss of 0.76 dB and a VSWR of 1.35, suitable for high-frequency applications up to 40 GHz. With gold-plated contacts and PTFE insulator, it offers reliable performance in temperatures ranging from -65°C to 105°C. Ideal for cable mounting with a right-angle style, this connector is designed for use in various RF applications requiring a 50 ohm characteristic impedance.
3211-60035
3211-60035 by Sv Microwave is a panel mount RF connector with gold termination, snap coupling, and PTFE insulator. It has a characteristic impedance of 50 ohm and operates up to 40 GHz. Ideal for high-frequency applications requiring reliable male connectors with straight mounting style.
81_MMBX-S50-0-1/111_NH
Huber+suhner Ag
81_MMBX-S50-0-1/111_NH by Huber+suhner Ag is a RF MMBX CONNECTOR with characteristic impedance of 50 ohm, operating up to 12.4 GHz. It features SNAP coupling, LCP/PFA insulator, and brass shell material. Ideal for board mounting in commercial applications due to its durability of 100 cycles and temperature range from -55 to 155 °C.
73415-5310
Molex
Molex 73415-5310 RF SMP Connector features 50 ohm impedance, gold finish, and 40 GHz frequency for high-performance applications. With solder termination and brass shell material, it is ideal for board mounting in various electronic devices. Operating temperature ranges from -65 to 165°C make it suitable for diverse environments.
861V509ER6
861V509ER6 by Winchester Interconnect is a threaded RF connector with a max operating temperature of 65°C and a min operating temperature of -40°C. It has a characteristic impedance of 75 ohm and can handle frequencies up to 3 GHz. This connector is commonly used in applications requiring high-frequency signal transmission, such as telecommunications and wireless communication systems.
73415-5300
Molex 73415-5300 RF SMP Connector has a characteristic impedance of 50 ohm, operates up to 40 GHz, and features a gold shell finish. Ideal for high-frequency applications requiring surface mount termination on boards due to its female contact gender and straight mounting style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
222128-10
RF F CONNECTOR; Option: GENERAL PURPOSE; JESD-609 Code: e3; Filter Feature: NO; Panel Mount: YES; Insulator Material: DELRIN/POLYPROPYLENE;
222197
RF F CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Minimum Operating Temperature: -65 Cel; Shell Material: BRASS;
222141
RF CONNECTOR; Option: GENERAL PURPOSE; Mounting Type: BOARD; Mounting Style: STRAIGHT; DIN Conformance: NO; Filter Feature: NO;
222153
RF F CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; MIL Conformity: NO; Termination Type: CRIMP;
222115
RF F CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Termination Contact Finish: TIN; Mating Contact Finish: NOT SPECIFIED;
222119
RF F CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Body or Shell Style: PLUG; IEC Conformity: NO;
222123
RF F CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: CRIMP; Insulator Material: ACETAL; Coupling Type: THREADED;
222158
RF F CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Termination Contact Finish: Gold (Au); DIN Conformance: NO;
222126
RF F CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Maximum Operating Frequency: 3 GHz; Body or Shell Style: PLUG;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved