Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 73415-3032 RF SMP Connector features 0.1 dB insertion loss, 50 ohm impedance, and 40 GHz max operating frequency. Ideal for high-frequency signal transmission in applications requiring a right-angle jack connector with snap coupling type and PTFE insulator material.
Median Price
$17.330
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$12.520
1k+ parts
-
10k+ parts
Nova Conductors
$6.804
Digiode
$18.040
Vyrian
VNN
Continental Prestige Electronics
$6.668
Bastille Electronics
$6.464
$6.056
Aztec Data Supply Inc.
$8.586
Semicontronic
$16.140
$15.736
$15.656
Corphita
$17.091
AZTECH Wire
$18.303
Andel Nordic
$36.130
$25.294
Argo Parts USA
Low insertion loss ensures minimal signal loss when transmitting data, making this RF connector ideal for high-performance applications.
Compact body depth allows for easy installation in tight spaces without compromising on performance.
Snap coupling type simplifies the connection process, allowing for quick and secure connections.
The insulator material offers excellent electrical insulation properties, ensuring reliable signal transmission.
High maximum operating temperature allows for use in a wide range of environments without degradation in performance.
Low minimum operating temperature ensures the connector can withstand extreme cold conditions, making it suitable for various applications.
Gol/Nickel shell finish provides durability and corrosion resistance, ensuring long-term reliability.
RF SMP connector type is known for its high frequency performance and reliability, making it a preferred choice for demanding RF applications.
High rated current signal allows for efficient power transmission without overheating, ensuring stable operation.
Low voltage standing wave ratio indicates minimal power loss due to signal reflection or impedance mismatch, ensuring efficient signal transmission.
Cable mounting type offers flexibility in installation and connection options, making it suitable for a variety of setups.
Standard 50 ohm characteristic impedance ensures compatibility with a wide range of RF devices and equipment.
Beryllium copper shell material provides excellent conductivity and durability, ensuring long-lasting performance.
Female contact gender is widely used in RF connectors and ensures compatibility with various mating connectors.
Jack style body or shell design offers easy and secure connection with mating connectors, enhancing overall usability.
Right angle mounting style allows for flexible installation in tight spaces or where space is limited, making it a versatile choice.
High maximum operating frequency of 40 GHz makes this RF connector suitable for high-speed data transmission applications.
Other Function RF Connectors 73415-3032 attributes and parameters. Explore more Other Function RF Connectors devices from Molex
Additional Features:
Body Depth:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
Insertion Loss:
Insulator Material:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Rated Current - Signal:
Shell Finish:
Shell Material:
Total No. of Contacts:
Voltage Standing Wave Ratio:
73415-3032 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
1N4148
Semitronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Crimson Semiconductor
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
1N4148WS
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Bkc Semiconductors
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
Surge Components
SS14
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
Transys Electronics
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rochester Electronics
1521-00002
Sv Microwave
RF 2.92MM CONNECTOR;
23_QN-50-0-1/133_NE
Huber+suhner Ag
23_QN-50-0-1/133_NE RF connector by Huber+suhner Ag features a characteristic impedance of 50 ohm, max operating frequency of 11 GHz, and voltage standing wave ratio of 1.58. With a panel mount design and solder termination type, it is ideal for applications requiring reliable RF connections in high-frequency environments up to 125°C.
73116-0075
Molex
Molex 73116-0075 RF Connector features snap coupling, gold shell finish, and 50 ohm impedance. Ideal for cable mounting with right-angle male contact gender termination. Made of polybutylene terephthalate insulator material and phosphor bronze shell material.
GRF7-J-P-08-GF-RA-TH1-E
Samtec
The Samtec GRF7-J-P-08-GF-RA-TH1-E RF connector features a body length of 1.576", dielectric voltage of 700VAC, and operating frequency up to 6 GHz. Ideal for commercial applications, this threaded jack connector has a characteristic impedance of 50 ohm and gold-plated contacts for reliable signal transmission.
D4S20L-40MA5-A
Rosenberger Hochfrequenztechnik & Kg
RF CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
BJ79TL-7
Cinch Connectivity Solutions
BJ79TL-7 by Cinch Connectivity Solutions is an RF TRB connector with a body diameter of 0.687" and body depth of 0.8". It features a nickel shell finish, brass shell material, and crimp termination type. Ideal for commercial applications at a max operating frequency of 0.5 GHz.
3-1532004-2
TE Connectivity's 3-1532004-2 is a threaded RF connector with a voltage standing wave ratio of 1.2 and a characteristic impedance of 93 ohm. It is commonly used in cable applications, offering multiple mating parts and solder termination for male contacts. Its right angle mounting style makes it suitable for frequencies up to 2 GHz.
3285-6001-TD
3285-6001-TD by Sv Microwave is a RF SMPM connector with 50 ohm impedance, gold finish, and right angle mounting. Ideal for applications requiring high frequency up to 40 GHz such as aerospace and defense systems.
CJT-T-P-GF-ST-TH1
CJT-T-P-GF-ST-TH1 by Samtec is a RF connector with 0.185" body diameter, GOLD OVER NICKEL termination finish, and POLYTETRAFLUOROETHYLENE insulator. It has 100 ohm impedance, operates up to 4 GHz, and is ideal for board mounting in applications requiring polarized key and male contact gender.
73300-0020
The Molex 73300-0020 RF SMPM Connector has a body length of 0.157", insertion loss of 0.1 dB, and dielectric voltage of 700VAC. Ideal for board mounting in applications requiring a durable female coax plug with 50 ohm impedance, operating up to 65 GHz. With gold shell finish, POLYTETRAFLUOROETHYLENE insulator, and -65 to 165 °C temperature range.
3221-4002
The SV Microwave 3221-4002 RF SMPM Connector has a body diameter of 0.181", insertion loss of 0.97 dB, and operates up to 65 GHz. With a coupling type of SNAP, it is ideal for high-frequency applications requiring low signal loss and precise connections. The connector features gold shell finish, PTFE insulator material, and beryllium copper shell material for reliable performance in temperatures ranging from -55°C to 125°C.
ERN.00.250.CTL
Lemo Usa
ERN.00.250.CTL by Lemo Usa is a panel mount RF F CONNECTOR with 0.315" body diameter and 0.22" body depth. Featuring SNAP coupling, POLYTETRAFLUOROETHYLENE insulator, and 50 ohm impedance, it's ideal for applications requiring a max operating frequency of 1.5 GHz.
U.FL-R-SMT(01)
U.FL-R-SMT(01) by Hirose Electric is a RF connector with 50 ohm impedance, gold contact finish, and 8 GHz operating frequency. It is used in commercial applications for board mounting due to its surface mount termination type and male contact gender. With a durability of 30 cycles, it offers reliable performance in temperatures ranging from -40°C to 105°C.
331-0472-201
OTHER RF CONNECTOR;
EHP.3T.675.CTL
EHP.3T.675.CTL by Lemo Usa is a threaded RF F connector with 75 ohm impedance and 1.2 GHz frequency, ideal for cable mounting applications. Featuring PTFE insulator material, solder termination, and male contact gender, it ensures low VSWR of 1.2 for high-quality signal transmission in various RF setups.
BJ459ACWP-201
Vertiv
Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 900VAC; Shell Material: BRASS; Mounting Option-1: LOCKING;
1052075-1
TE Connectivity's 1052075-1 RF Connector features 0.665" body length, 0.07 dB insertion loss, and 10000000000 ohm insulation resistance. Ideal for commercial applications with a frequency up to 26 GHz, this threaded connector has PTFE insulator material and operates b/w -65°C to 125°C.
PKG.1B.303.CLLD72
PKG.1B.303.CLLD72 by Lemo Usa is a panel mount RF F connector with snap coupling, suitable for cable and panel mounting. It features a polyetheretherketone insulator material, solder termination, and female contact gender. Ideal for applications requiring a straight socket body style in the Other Function RF Connectors category.
102-799-16
Amphenol
Amphenol 102-799-16 is a RF connector with a body diameter of 0.323 inch and insulation resistance of 10^10 ohm. It has a max operating temperature of 155°C and is commonly used in commercial applications for connecting cables with RG-316 type.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
73412-0110
Molex 73412-0110 RF Connector features 50 ohm impedance, 6 GHz frequency, and 90VAC dielectric voltage. Ideal for commercial applications, it offers a durable design with gold nickel finish and liquid crystal polymer insulator for reliable performance in temperatures ranging from -40 to 90°C.
73412-0114
Molex 73412-0114 RF Connector has a Voltage Standing Wave Ratio of 1.3, SNAP coupling type, and male contact gender. Ideal for surface mount board applications in various electronic devices.
73415-5030
Molex 73415-5030 is an RF SMP connector with a characteristic impedance of 50 ohm. It has a max operating frequency of 40 GHz and is suitable for use in commercial applications.
73415-5120
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE; Body or Shell Style: JACK; Panel Mount: NO;
73415-3310
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Insertion Loss: .1 dB; Contact Material: BRASS;
73415-3320
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Body Length: .236 inch; Maximum Operating Frequency: 40 GHz;
73415-5032
RF SMP CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: FEMALE; Termination Type: CRIMP; Mating Contact Finish: NOT SPECIFIED; Body Length: .4 inch;
73415-3030
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Style: COAX; Insertion Loss: .1 dB;
73415-3593
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; Shell Finish: GOLD; Mounting Type: BOARD;
734160010
RF CONNECTOR;
73415-3592
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Panel Mount: NO; Body Depth: .2 inch;
73415-3590
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 1; Mounting Style: STRAIGHT; Body or Shell Style: PLUG;
73415-5720
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Voltage Standing Wave Ratio: 1.5; Maximum Operating Frequency: 40 GHz;
73415-3591
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Characteristic Impedance: 50 ohm; Coupling Type: SNAP;
73415-5310
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Shell Finish: GOLD; Shell Material: BRASS;
73415-5740
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Minimum Operating Temperature: -65 Cel; Maximum Operating Temperature (Cel): 165; Body Length: .25 inch;
73415-5300
Molex 73415-5300 RF SMP Connector has a characteristic impedance of 50 ohm, operates up to 40 GHz, and features a gold shell finish. Ideal for high-frequency applications requiring surface mount termination on boards due to its female contact gender and straight mounting style.
73415-5741
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Contact Material: NOT SPECIFIED; Maximum Operating Temperature (Cel): 165;
73415-3031
Molex 73415-3031 RF SMP Connector has 0.1 dB insertion loss, operates up to 40 GHz, and features a 50 ohm characteristic impedance. Ideal for high-frequency applications requiring low signal loss, such as telecommunications and aerospace industries.
73415-3033
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 1; Body Depth: .26 inch; Maximum Operating Temperature (Cel): 155;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved