Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 73415-3310 RF SMP Connector features a 0.236" body diameter, gold/nickel termination contact finish, and 50 ohm characteristic impedance. Ideal for board mounting in applications requiring durability up to 500 cycles, with a max operating frequency of 40 GHz.
Median Price
$5.012
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Farnell
1+ parts
$4.480
100+ parts
$2.860
1k+ parts
$2.650
10k+ parts
-
Element14
$4.763
Mouser Electronics
$5.270
$3.950
$3.680
$3.460
Chip1Stop
$5.780
Arrow
$6.085
$4.212
$3.300
DigiKey
$6.160
$4.365
Master Electronics
$3.810
$3.740
Newark
$5.260
Verical
$4.080
Powell Electronics
$3.730
TTI
Digiode
$3.097
TestEquity
$3.960
Nova Conductors
$4.320
VNN
Sea View Technologies
IBS Electronics
$3.712
TME
$4.790
$4.450
Vyrian
Semi Source
Electronics Depot
Prism Electronics
Andel Nordic
$1.840
$1.286
Semicontronic
$2.788
$2.774
Corphita
$2.934
Continental Prestige Electronics
$4.200
$3.340
Argo Parts USA
$4.204
Netroflash
$4.104
$4.018
Perfect Parts
Futuretech Components
Kepictronics
Optimal size for easy installation and compatibility with standard dimensions.
Standard size ensures compatibility with various connectors and equipment.
High insulation resistance ensures reliable and stable signal transmission.
Low insertion loss ensures minimal signal attenuation and high performance.
Gold/nickel finish provides corrosion resistance and ensures long-lasting connections.
High maximum operating temperature makes it suitable for various environments and applications.
Low minimum operating temperature allows for use in extreme cold conditions.
RF SMP connector offers reliable and high-frequency performance for RF applications.
Withstands repeated connections and disconnections, ensuring long-term durability.
Standard 50 ohm impedance for compatibility with a wide range of RF equipment.
High-frequency capability makes it suitable for demanding RF applications.
Commercial reliability ensures consistent performance and quality for various applications.
Other Function RF Connectors 73415-3310 attributes and parameters. Explore more Other Function RF Connectors devices from Molex
Body Width:
Body Depth:
Body Diameter:
Body Length:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
Coupling Type:
Durability:
Maximum Insertion Force (N):
Insertion Loss:
Insulation Resistance:
JESD-609 Code:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
Minimum Withdrawal Force (N):
73415-3310 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM78L05ACMX/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
1N4148
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Leshan Radio
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
Zetex Plc
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
Bkc Semiconductors
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
0734120110
Molex
Molex 0734120110 RF Connector features gold nickel finish, snap coupling, and 50 ohm impedance. Ideal for surface mount applications in boards, this receptacle connector is designed for female contact gender with straight mounting style.
7702-13
Kings Electronics
RF F CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Frequency: .5 GHz; Termination Contact Finish: GOLD NICKEL; Mating Contact Finish: GOLD;
SMP-MSSB-PCS-1
Amphenol
Amphenol's SMP-MSSB-PCS-1 is a 50 ohm RF SMP connector with gold finish, suitable for applications up to 40 GHz. Featuring snap coupling and PTFE insulator, it operates b/w -40°C to 85°C. Ideal for surface mount board mounting, this male plug connector offers low VSWR of 1.5 for high-frequency transmissions.
128-0711-201
Vertiv
RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Voltage Standing Wave Ratio: 1.3; Maximum Operating Frequency: 6 GHz; Termination Type: SURFACE MOUNT;
MM5829-2700RJ4
Murata Manufacturing
Murata Manufacturing's MM5829-2700RJ4 RF CONNECTOR features SNAP coupling, 1.3 VSWR, and 50 ohm impedance. Ideal for BOARD mounting in applications up to 12 GHz frequency range.
4-1532005-9
TE Connectivity
TE Connectivity's 4-1532005-9 RF Connector features threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for applications up to 2 GHz, this male plug connector is designed for cable mounting with crimp termination.
119S144-40ML5
Rosenberger Hochfrequenztechnik & Kg
Rosenberger's 119S144-40ML5 RF SMP Connector features 0.09 dB insertion loss, threaded coupling, and gold termination. Ideal for applications up to 10 GHz, it is a male plug with surface mount termination for 50 ohm impedance boards.
902-9040
Amphenol 902-9040 RF connector features 0.2 dB insertion loss, SNAP coupling type, and 50 ohm impedance. Ideal for applications up to 6 GHz frequency, it is a surface mount female connector suitable for board mounting in straight orientation.
2334884-1
TE Connectivity 2334884-1 RF Connector has a body depth of 0.023", SNAP coupling type, and operates b/w -40 to 85°C. With characteristic impedance of 50 ohm, it is ideal for board mounting in applications up to 6 GHz frequency range.
5-1634540-1
TE Connectivity 5-1634540-1 RF Connector features threaded coupling, TPX insulator, and 75 ohm impedance. Ideal for board mounting in applications requiring a right angle jack connector with a max operating frequency of 2 GHz.
R222.M80.500
Radiall S A
Radiall S A R222.M80.500 RF SMP Connector has 0.16 dB insertion loss, 1.32 VSWR, and operates up to 6 GHz. With a body length of 0.256", it is ideal for right angle cable mounting applications in RF systems requiring a 50 ohm characteristic impedance.
2101510-2
TE Connectivity's 2101510-2 RF SMPM Connector operates b/w -65 to 165°C, with a characteristic impedance of 50Ω. Featuring a stainless steel shell, it has one connector and four contacts for board mounting applications.
15440
Corning Gilbert
RF CONNECTOR; Contact Gender: FEMALE; Filter Feature: NO; Additional Features: LOW PROFILE; IEC Conformity: NO; Termination Type: SOLDER;
431-131J-52S
RF CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
3232
Pomona Electronics
3232 by Pomona Electronics is an RF connector with gold termination and mating contact finish. Featuring bayonet coupling, it has a characteristic impedance of 50 ohm and solder termination type. Ideal for applications requiring high-quality female-female-female connectors in RF systems.
R222052000W
The Radiall S A R222052000W RF SMP Connector has a body diameter of 0.09", insertion loss of 0.76 dB, and operates up to 40 GHz. With gold termination contact finish, it is ideal for high-frequency applications requiring a 50 ohm characteristic impedance. The connector features a straight mounting style and female contact gender for cable installations.
3211-40024
RF SMP CONNECTOR;
U.FL-R-SMT-K(800)
Hirose Electric
OTHER RF CONNECTOR;
M49142/03-0008
Winchester Interconnect
Winchester Interconnect's M49142/03-0008 RF TRB Connector features gold termination and mating contact finish, bayonet coupling type, and MIL conformity. Ideal for male cable mounting applications requiring a plug with straight mounting style.
R222.052.000
Radiall S A R222.052.000 RF Connector features 0.13" body diameter, 0.759 dB insertion loss, and gold (Au) termination with Ni barrier. Ideal for 40 GHz applications with 50 ohm impedance, SNAP coupling, and solder termination for female connectors on cables. Operating range from -65 to 165 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
73412-0110
Molex 73412-0110 RF Connector features 50 ohm impedance, 6 GHz frequency, and 90VAC dielectric voltage. Ideal for commercial applications, it offers a durable design with gold nickel finish and liquid crystal polymer insulator for reliable performance in temperatures ranging from -40 to 90°C.
73412-0114
Molex 73412-0114 RF Connector has a Voltage Standing Wave Ratio of 1.3, SNAP coupling type, and male contact gender. Ideal for surface mount board applications in various electronic devices.
73415-5030
Molex 73415-5030 is an RF SMP connector with a characteristic impedance of 50 ohm. It has a max operating frequency of 40 GHz and is suitable for use in commercial applications.
73415-5120
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE; Body or Shell Style: JACK; Panel Mount: NO;
73415-3320
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Body Length: .236 inch; Maximum Operating Frequency: 40 GHz;
73415-5032
RF SMP CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: FEMALE; Termination Type: CRIMP; Mating Contact Finish: NOT SPECIFIED; Body Length: .4 inch;
73415-3030
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Style: COAX; Insertion Loss: .1 dB;
73415-3593
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; Shell Finish: GOLD; Mounting Type: BOARD;
734160010
RF CONNECTOR;
73415-3032
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Depth: .26 inch; Rated Current - Signal: 1.2 A; Minimum Operating Temperature: -65 Cel;
73415-3592
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Panel Mount: NO; Body Depth: .2 inch;
73415-3590
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 1; Mounting Style: STRAIGHT; Body or Shell Style: PLUG;
73415-5720
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Voltage Standing Wave Ratio: 1.5; Maximum Operating Frequency: 40 GHz;
73415-3591
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Characteristic Impedance: 50 ohm; Coupling Type: SNAP;
73415-5310
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Shell Finish: GOLD; Shell Material: BRASS;
73415-5740
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Minimum Operating Temperature: -65 Cel; Maximum Operating Temperature (Cel): 165; Body Length: .25 inch;
73415-5300
Molex 73415-5300 RF SMP Connector has a characteristic impedance of 50 ohm, operates up to 40 GHz, and features a gold shell finish. Ideal for high-frequency applications requiring surface mount termination on boards due to its female contact gender and straight mounting style.
73415-5741
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Contact Material: NOT SPECIFIED; Maximum Operating Temperature (Cel): 165;
73415-3580
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Style: COAX; Mounting Style: RIGHT ANGLE;
73415-3311
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; Shell Finish: GOLD;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved