Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 73415-5740 RF SMP Connector features SNAP coupling, PTFE insulator, gold finish, and brass shell. With 50 ohm impedance and 40 GHz frequency, it's ideal for high-frequency applications. Suitable for surface mount board mounting with male contact gender in plug style.
Median Price
$3.450
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$6.130
100+ parts
$4.910
1k+ parts
$3.560
10k+ parts
-
Master Electronics
$3.190
Newark
$3.390
Verical
Powell Electronics
$3.470
Adafruit Industries
TME
$3.790
Digiode
VNN
PC Components Company LLC
Bristol Electronics
Vyrian
Nova Conductors
Prism Electronics
Andel Nordic
$0.110
$0.074
Aztec Data Supply Inc.
$5.125
AZTECH Wire
$7.470
Argo Parts USA
Continental Prestige Electronics
Perfect Parts
Corphita
Bastille Electronics
The compact body length allows for efficient use of space and easy integration into various electronic devices.
The thin body depth makes this connector suitable for applications where space is limited.
The SNAP coupling type allows for quick and easy connections, saving time during installation and maintenance.
The insulator material provides high dielectric strength and low loss, ensuring efficient signal transmission.
With a high maximum operating temperature, this connector is suitable for use in a wide range of environments and applications.
The low minimum operating temperature ensures reliable performance even in extremely cold conditions.
The gold shell finish offers corrosion resistance and ensures a reliable electrical connection.
The RF SMP connector type is widely used in high-frequency applications and provides a secure connection for optimal signal integrity.
The board mounting type allows for easy integration into circuit boards, making it suitable for various electronic devices.
The 50-ohm characteristic impedance ensures compatibility with a wide range of RF systems and devices.
The brass shell material offers durability and conductivity, providing a reliable connection for optimal performance.
The surface mount termination type allows for easy soldering onto circuit boards, simplifying the installation process.
The male contact gender is compatible with a wide range of female connectors, ensuring versatility and ease of use.
The plug style body or shell makes it easy to connect and disconnect the connector, providing convenience during installation and maintenance.
The straight mounting style allows for a direct and secure attachment, ensuring stability and optimal signal transmission.
With a high maximum operating frequency, this connector is suitable for high-speed data transmission and high-frequency applications.
Other Function RF Connectors 73415-5740 attributes and parameters. Explore more Other Function RF Connectors devices from Molex
Body Depth:
Body Length:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
Insulator Material:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Shell Finish:
Shell Material:
Termination Type:
Total No. of Contacts:
73415-5740 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
American Power Devices
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
Laube Technology
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
Telcom Semiconductor
STM32H753ZIT6
STMicroelectronics
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
2N7002
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
U.FL-R-SMT-1(01)
Hirose Electric
Hirose Electric U.FL-R-SMT-1(01) is a 50 ohm RF connector with gold termination, suitable for board mounting. With a frequency range up to 6 GHz and VSWR of 1.3, it's ideal for commercial applications requiring high durability and reliability in temperatures ranging from -40°C to 90°C.
MM8930-2600RJ4
Murata Manufacturing
Murata Manufacturing's MM8930-2600RJ4 RF Connector has a 50 ohm impedance, 1.2 VSWR, and operates up to 6 GHz. With SNAP coupling, it is ideal for surface mount applications in boards with temperatures ranging from -40 to 85°C.
3-1532004-2
TE Connectivity
TE Connectivity's 3-1532004-2 is a threaded RF connector with a voltage standing wave ratio of 1.2 and a characteristic impedance of 93 ohm. It is commonly used in cable applications, offering multiple mating parts and solder termination for male contacts. Its right angle mounting style makes it suitable for frequencies up to 2 GHz.
R285025401W
Radiall S A
RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Mating Contact Finish: NOT SPECIFIED; IEC Conformity: NO;
EPY.00.250.NTN
Lemo Usa
EPY.00.250.NTN by Lemo Usa is a SNAP RF CONNECTOR with POLYTETRAFLUOROETHYLENE insulator, 50 ohm impedance, and 1.5 GHz frequency for BOARD mounting applications. It features FEMALE contact gender, RIGHT ANGLE mount style, and 1.25 VSWR ideal for solder termination in RF systems.
25-7630
Vertiv
RF F CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Characteristic Impedance: 75 ohm; Body or Shell Style: JACK; Polarization Key: POLARIZED HOUSING;
142-1000-002
RF CONNECTOR; Option: HERMETIC; Contact Gender: MALE; Filter Feature: NO; Termination Contact Finish: GOLD (50) OVER NICKEL (5); IEC Conformity: NO;
1056729-1
1056729-1 by TE Connectivity is a RF CONNECTOR with 50 ohm impedance, made of STAINLESS STEEL. Operating temperature range: -65 to 165 °C. Used in applications requiring high-quality RF connections at extreme temperatures.
431-131J-52S
Amphenol
RF CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
73406-6360
Molex
The Molex 73406-6360 RF SMP Connector features a gold shell finish, PTFE insulator, and Beryllium Copper shell material. With a characteristic impedance of 50 ohm, it is ideal for commercial applications requiring panel mount with solder termination in straight mounting style.
FAA.1D.694.CNL
FAA.1D.694.CNL by Lemo Usa is a panel mount RF connector with snap coupling, polyamide insulator, and solder termination. It features a male contact gender and plug body style for straight mounting applications in the RF field.
PL455ACFLS-222
Cinch Connectivity Solutions
RF TRK CONNECTOR; IEC Conformity: NO; DIN Conformance: NO; Mating Contact Finish: NICKEL; Termination Contact Finish: NICKEL; MIL Conformity: NO;
SF1611-60021-2S
Sv Microwave
SF1611-60021-2S by Sv Microwave is a 50 ohm RF 2.4mm connector with 0.283 dB insertion loss and 1.28 VSWR, suitable for applications up to 50 GHz. Featuring threaded coupling, stainless steel shell, and male contact gender, it supports board and panel mounting in environments ranging from -65°C to 165°C.
SMZ6121A6-3GT30G-6-75
Amphenol's SMZ6121A6-3GT30G-6-75 RF Connector features 5000000000 ohm Insulation Resistance, 2100VAC Dielectric Withstanding Voltage, and 1.2 Voltage Standing Wave Ratio. Ideal for commercial applications with a max operating frequency of 3 GHz, this connector is designed for use in RF systems requiring high reliability and a characteristic impedance of 75 ohm.
222197
Amphenol 222197 RF connector features gold contact finish, threaded coupling, and PTFE insulator. With a max operating temp of 165°C and min of -65°C, it's ideal for commercial applications up to 2 GHz frequency. This male plug connector has a characteristic impedance of 75 ohm for cable mounting in various RF setups.
R223.435.000
Radiall S A R223.435.000 RF Connector features 0.42 dB Insertion Loss, SNAP Coupling Type, and LIQUID CRYSTAL POLYMER Insulator Material. Ideal for 12.4 GHz applications with 50 ohm impedance, solder termination, and male contact gender on board mounting in straight style receptacle.
1063357-1
TE Connectivity 1063357-1 RF Connector features threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for commercial applications with -65 to 125 °C operating range. Female crimp termination with stainless steel shell for reliable panel mounting.
3202-6000
3202-6000 RF SMPM Connector by Sv Microwave features a 0.156" body diameter and 0.08" body depth, with a max operating frequency of 40 GHz. It has a characteristic impedance of 50 ohm, suitable for panel mount applications in high-frequency environments. The connector is designed with stainless steel shell material and PTFE insulator for durability and reliable performance.
FFA.00.250.NTAC31
FFA.00.250.NTAC31 by Lemo Usa is a SNAP RF CONNECTOR with POLYTETRAFLUOROETHYLENE insulator, 50 ohm impedance, and 1.5 GHz frequency range. Ideal for cable mounting applications requiring low VSWR and solder termination for male plug connectors.
128-0711-201
RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Voltage Standing Wave Ratio: 1.3; Maximum Operating Frequency: 6 GHz; Termination Type: SURFACE MOUNT;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
73412-0110
Molex 73412-0110 RF Connector features 50 ohm impedance, 6 GHz frequency, and 90VAC dielectric voltage. Ideal for commercial applications, it offers a durable design with gold nickel finish and liquid crystal polymer insulator for reliable performance in temperatures ranging from -40 to 90°C.
73412-0114
Molex 73412-0114 RF Connector has a Voltage Standing Wave Ratio of 1.3, SNAP coupling type, and male contact gender. Ideal for surface mount board applications in various electronic devices.
73415-5030
Molex 73415-5030 is an RF SMP connector with a characteristic impedance of 50 ohm. It has a max operating frequency of 40 GHz and is suitable for use in commercial applications.
73415-5120
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE; Body or Shell Style: JACK; Panel Mount: NO;
73415-3310
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Insertion Loss: .1 dB; Contact Material: BRASS;
73415-3320
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Body Length: .236 inch; Maximum Operating Frequency: 40 GHz;
73415-5032
RF SMP CONNECTOR; Option: WITH CABLE ASSEMBLY; Contact Gender: FEMALE; Termination Type: CRIMP; Mating Contact Finish: NOT SPECIFIED; Body Length: .4 inch;
73415-3030
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Style: COAX; Insertion Loss: .1 dB;
73415-3593
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; Shell Finish: GOLD; Mounting Type: BOARD;
734160010
RF CONNECTOR;
73415-3032
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Depth: .26 inch; Rated Current - Signal: 1.2 A; Minimum Operating Temperature: -65 Cel;
73415-3592
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Coupling Type: SNAP; Panel Mount: NO; Body Depth: .2 inch;
73415-3590
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 1; Mounting Style: STRAIGHT; Body or Shell Style: PLUG;
73415-5720
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Voltage Standing Wave Ratio: 1.5; Maximum Operating Frequency: 40 GHz;
73415-3591
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Characteristic Impedance: 50 ohm; Coupling Type: SNAP;
73415-5310
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Shell Finish: GOLD; Shell Material: BRASS;
73415-5300
Molex 73415-5300 RF SMP Connector has a characteristic impedance of 50 ohm, operates up to 40 GHz, and features a gold shell finish. Ideal for high-frequency applications requiring surface mount termination on boards due to its female contact gender and straight mounting style.
73415-5741
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Contact Material: NOT SPECIFIED; Maximum Operating Temperature (Cel): 165;
73415-5721
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: NOT APPLICABLE; Minimum Operating Temperature: -65 Cel; Maximum Operating Frequency: 40 GHz;
73415-5730
RF SMP CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Depth: .146 inch; Mounting Style: STRAIGHT; Termination Type: SURFACE MOUNT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved