Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 1; Insertion Loss: .14 dB; IEC Conformity: NO;
Median Price
-
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
VNN
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Pegasus Components GmbH
Vyrian
Nova Conductors
Gateway Technologies
$8.000
$7.120
Singapore Electronics
$8.800
$8.184
$7.832
$7.480
Aztec Data Supply Inc.
$10.585
AZTECH Wire
$10.822
Ampacity Inc.
$13.500
Continental Prestige Electronics
Aranea Global
Argo Parts USA
Corphita
Other Function RF Connectors 1086009-1 attributes and parameters. Explore more Other Function RF Connectors devices from Amphenol
Body Depth:
Body Length:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Contact Gender:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Material:
MIL Conformity:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
1086009-1 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
Kec
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS303C
Idec
ROTARY SWITCH;
LM358AN
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
Taitron Components
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
15440
Corning
RF CONNECTOR; Contact Gender: FEMALE; MIL Conformity: NO; Filter Feature: NO; DIN Conformance: NO; Panel Mount: NO;
292-100J-52S
Amphenol
Amphenol 292-100J-52S is a threaded RF 2.92mm connector with gold shell finish, suitable for panel mounting. It has a max operating frequency of 40GHz, characteristic impedance of 50Ω, and operates b/w -65 to +165°C. Ideal for applications requiring high-frequency signal transmission in demanding environments.
4-1532005-9
TE Connectivity
TE Connectivity's 4-1532005-9 RF Connector features threaded coupling, PTFE insulator, and 50 ohm impedance. Ideal for applications up to 2 GHz, this male plug connector is designed for cable mounting with crimp termination.
131-0140-0001
Malco Microdot Uk
RF CONNECTOR; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; MIL Conformity: NO; Insulator Material: POLYTETRAFLUOROETHYLENE; Filter Feature: NO;
R223425000W
Radiall S A
R223425000W by Radiall S A is an RF MMBX connector with SNAP coupling type, suitable for board mounting. Featuring a body depth of 0.256", it has a solder termination and female contact gender. Ideal for applications requiring a straight receptacle design in RF connectivity.
R222M80500
R222M80500 by Radiall S A is a RF SMP CONNECTOR with a body length of 0.256 inch and body depth of 0.421 inch. It has an insertion loss of 0.16 dB and can operate at temperatures ranging from -55 to 165 °C. This connector is commonly used in applications requiring a 50 ohm characteristic impedance and a max operating frequency of 6 GHz.
M-P-10-1
Hirose Electric
Hirose Electric's M-P-10-1 RF Connector is a threaded plug with Tetrafluoride insulator material. It operates at a max frequency of 0.2 GHz, suitable for cable mounting with solder termination. Ideal for applications requiring reliable male connectors in straight mounting style.
SF1521-60150
Sv Microwave
SF1521-60150 by Sv Microwave is a 2.92mm RF connector with threaded coupling, suitable for board mounting. With a max operating frequency of 40 GHz and VSWR of 1.25, it has a characteristic impedance of 50 ohm. This female jack connector is made of stainless steel, ideal for applications requiring high-frequency signal transmission.
R110.081.020
Radiall S A R110.081.020 RF MMCX Connector features 50 ohm impedance, 6 GHz frequency, and 500VAC dielectric voltage for high-performance RF applications. With POLYTETRAFLUOROETHYLENE insulator and GOLD finish, it ensures durability in temperatures ranging from -55 to 155 °C. Ideal for RG-178 cable termination with FEMALE contact gender in straight plug style.
R317.074.000
R317.074.000 RF Connector by Radiall S A features a body diameter of 0.563", gold termination with nickel barrier, and a max operating temperature of 165°C. With a characteristic impedance of 50 ohm, it is ideal for applications up to 2 GHz in industries requiring reliable cable connections at temperatures ranging from -65°C to 165°C.
1055692-1
TE Connectivity's 1055692-1 RF Connector features 0.15 dB Insertion Loss, SNAP Coupling Type, and POLYPHENYLENE SULFIDE Insulator. With a max operating frequency of 6 GHz, it is ideal for board mounting in applications requiring a 50 ohm characteristic impedance and male contact gender.
2390
Pomona Electronics
RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE-FEMALE; Panel Mount: NO; Mating Contact Finish: GOLD; MIL Conformity: NO;
X.FL-R-SMT-1(80)
RF CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; JESD-609 Code: e4; Termination Contact Finish: Gold (Au);
U.FL-R-SMT-1(60)
U.FL-R-SMT-1(60) by Hirose Electric is a surface mount RF connector with a body length of 0.122 inch, body width of 0.118 inch, and body depth of 0.049 inch. It has a max operating frequency of 6 GHz and is commonly used in commercial applications requiring a characteristic impedance of 50 ohm.
1211-40087
RF SMP CONNECTOR;
2337019-1
TE Connectivity 2337019-1 RF Connector features snap coupling, polyethylene insulator, and gold flash shell finish. With a characteristic impedance of 50 ohm and max operating frequency of 6 GHz, it is ideal for board mounting applications in electronic devices. Operating temperature ranges from -40 to 85°C make it suitable for various environments.
1996777-2
TE Connectivity's 1996777-2 RF SMPM CONNECTOR has a temp range of -55 to 105°C, with 8 contacts and characteristic impedance of 50 ohm. It features stainless steel shell material, suitable for board mounting applications.
MS-156C(20)
The Hirose Electric MS-156C(20) RF connector features 0.4 dB insertion loss, 1.5 VSWR, and operates up to 11 GHz. It is a surface mount receptacle with TIN termination contact finish, ideal for high-frequency board applications.
3231
The Pomona Electronics 3231 RF Connector features gold-plated termination and mating contacts, with a characteristic impedance of 50 ohm. It utilizes a bayonet coupling type for secure connections and is suitable for applications requiring high-quality signal transmission in straight mounting configurations.
7702-13
Winchester Interconnect
Winchester Interconnect's 7702-13 RF Connector features gold contact finish, crimp termination, and 75 ohm impedance. Ideal for panel mounting in applications requiring a straight jack connector with a max operating frequency of 0.5 GHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1086009-1
TE Connectivity's 1086009-1 RF Connector features 0.14 dB Insertion Loss, SNAP Coupling Type, and POLYPHENYLENE SULFIDE Insulator. With a max operating frequency of 6 GHz, it is ideal for board mounting applications requiring a 50 ohm characteristic impedance and female contact gender.
Tyco Electronics Amp
RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: SURFACE MOUNT; Characteristic Impedance: 75 ohm; Insulator Material: POLYPHENYLENE SULFIDE;
1086008-1
RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: .125 inch; DIN Conformance: NO; Mounting Type: MICROSTRIP;
RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Maximum Operating Frequency: 3 GHz; Insertion Loss: .14 dB; Filter Feature: NO;
RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insertion Loss: .14 dB; Mating Contact Finish: NOT SPECIFIED; Panel Mount: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved