Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF SMPM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
Median Price
$10.500
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$12.040
100+ parts
$9.556
1k+ parts
10k+ parts
-
Verical
$11.047
Chip1Stop
Arrow
$8.972
$8.418
Powell Electronics
$10.180
$7.620
Nova Conductors
$10.003
VNN
Electro Sonic
$9.320
$7.890
Vyrian
Semi Source
IBS Electronics
$13.169
$11.150
Aztec Data Supply Inc.
$5.310
Ampacity Inc.
$6.160
Corohmni
$9.956
Gateway Technologies
$8.902
Netroflash
$9.803
Singapore Electronics
$11.003
$10.232
$9.792
$9.352
Argo Parts USA
Continental Prestige Electronics
$12.810
Other Function RF Connectors 925-138J-51P attributes and parameters. Explore more Other Function RF Connectors devices from Amphenol
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
925-138J-51P Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
STM32F103C8T6
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taitron Components
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99-7-F
Multicomp Pro
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Good-ark Electronics
Silicon Standard
Bharat Electronics
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317TG
Texas Instruments
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
EM30MSD(02)
Hirose Electric
OTHER RF CONNECTOR; JESD-609 Code: e4; Termination Contact Finish: Silver (Ag);
282135-75
Amphenol
RF 1.0/2.3 DIN CONNECTOR; Manufacturer Series: 282135-75;
EM30MSD-A(02)
FFA.00.250.CTAC29
Lemo Usa
FFA.00.250.CTAC29 by Lemo Usa is a SNAP RF CONNECTOR with POLYTETRAFLUOROETHYLENE insulator, 50 ohm impedance, and 1.5 GHz frequency range. Ideal for cable mounting applications requiring high-quality signal transmission in male plug configurations.
SMP-MSLD-PCS-T
The Amphenol SMP-MSLD-PCS-T RF connector features a dielectric voltage of 470VAC, operating temperature range of -65 to 165°C, and impedance of 50 ohm. Ideal for commercial applications, this connector is designed for surface mount termination on boards with a max frequency of 18 GHz.
25-146-1000-92
Winchester Interconnect
RF CONNECTOR;
81_MMBX-S50-0-1/111_NE
Huber+suhner Ag
81_MMBX-S50-0-1/111_NE by Huber+suhner Ag is a RF MMBX CONNECTOR with SNAP coupling, LCP/PFA insulator, and 50 ohm impedance. It operates up to 12.4 GHz at -55 to 155 °C, suitable for BOARD mounting in commercial applications requiring durable connectors with low VSWR.
636101111001
Wuerth Elektronik & Kg
Wurth Elektronik 636101111001 RF Connector features 0.3 dB insertion loss, 50 ohm impedance, and 6 GHz max operating frequency. Ideal for board mounting applications in electronics with a temperature range of -40 to 90°C.
R317.074.000
Radiall S A
R317.074.000 RF Connector by Radiall S A features a body diameter of 0.563", gold termination with nickel barrier, and a max operating temperature of 165°C. With a characteristic impedance of 50 ohm, it is ideal for applications up to 2 GHz in industries requiring reliable cable connections at temperatures ranging from -65°C to 165°C.
3-1532004-2
TE Connectivity
TE Connectivity's 3-1532004-2 is a threaded RF connector with a voltage standing wave ratio of 1.2 and a characteristic impedance of 93 ohm. It is commonly used in cable applications, offering multiple mating parts and solder termination for male contacts. Its right angle mounting style makes it suitable for frequencies up to 2 GHz.
5-1814822-7
RF F CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; No. of Connectors: ONE; DIN Conformance: NO; IEC Conformity: NO;
3285-6001-TD
Sv Microwave
3285-6001-TD by Sv Microwave is a RF SMPM connector with 50 ohm impedance, gold finish, and right angle mounting. Ideal for applications requiring high frequency up to 40 GHz such as aerospace and defense systems.
MS-156C3(20)
RF CONNECTOR; Termination Contact Finish: GOLD; Contact Material: NOT SPECIFIED; JESD-609 Code: e4; Mating Contact Finish: NOT SPECIFIED;
1056551-1
TE Connectivity 1056551-1 RF Connector features 50 ohm impedance, 0.12 dB insertion loss, and 26.5 GHz max frequency. Ideal for commercial applications, it has a durable beryllium copper shell with gold finish and PTFE insulator for high reliability in temperatures ranging from -65 to 165 °C.
331-0472-201
OTHER RF CONNECTOR;
1075
RF CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
W.FL-R-SMT-1(10)
W.FL-R-SMT-1(10) by Hirose Electric is a RF connector with gold termination, 50 ohm impedance, and 6 GHz operating frequency. Ideal for board mounting applications in electronics, it offers high insulation resistance of 500M ohm and durability of 20 cycles.
119S141-40ML5
Rosenberger Hochfrequenztechnik & Kg
Rosenberger's 119S141-40ML5 RF SMP Connector features 0.09 dB insertion loss, SNAP coupling type, and PEEK/PTFE/LCP insulator. Ideal for board mounting in applications up to 10 GHz requiring a 50 ohm characteristic impedance.
8-1393670-3
TE Connectivity's 8-1393670-3 is a RF connector with a body diameter of 0.287 inch and depth of 0.433 inch. It has a slide-on coupling type and is made of polytetrafluoroethylene insulator material. This connector is commonly used in commercial applications with a max operating frequency of 10 GHz.
19S101-40ML5-NM
The RF SMP connector 19S101-40ML5-NM by Rosenberger features a characteristic impedance of 50 ohm, insertion loss of 0.26 dB, and max operating frequency of 26.5 GHz. Ideal for commercial applications, this plug-style connector with liquid crystal polymer insulator is designed for board mounting in high-frequency environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
925-123C-51A
RF SMPM CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
925-144J-51PT
RF SMPM CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
925-127P-51P
RF SMPM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
925-137J-51P
RF SMPM CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
925-169J-51PT
RF SMPM CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
925-106A-51S
RF CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
925-143J-51P
RF SMPM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
925-118C-51S
925-120C-51R
925-134J-51S
925-135J-51S
925-144J-51P
RF CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
925-124P-51S
925-126J-51P
RF SMPM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: NOT APPLICABLE; Panel Mount: NO; Mounting Style: STRAIGHT;
925-128C-51A
925-129C-51S
925-157J-51S
925-139J-51P
925-140J-51P
925-169J-51P
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved