Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
Median Price
$12.005
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
RS (Exports)
1+ parts
$6.970
100+ parts
-
1k+ parts
10k+ parts
DigiKey
$12.120
$9.748
$7.219
Mouser Electronics
$16.480
$12.420
$11.090
Powell Electronics
$10.560
$7.390
Verical
$15.600
$11.700
Master Electronics
$11.890
$10.590
Gateway Technologies
$5.000
$4.450
Singapore Electronics
$5.500
$5.115
$4.895
$4.674
Other Function RF Connectors 925-144J-51P attributes and parameters. Explore more Other Function RF Connectors devices from Amphenol
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
925-144J-51P Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
1N4148
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Tak Cheong Electronics Holdings
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
Multicomp Pro
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
NC7WZ17P6X
Onsemi
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
SN65HVD230DR
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
MBRS130LT3G
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
SS14
Eic Semiconductor
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
222197
Amphenol
Amphenol 222197 RF connector features gold contact finish, threaded coupling, and PTFE insulator. With a max operating temp of 165°C and min of -65°C, it's ideal for commercial applications up to 2 GHz frequency. This male plug connector has a characteristic impedance of 75 ohm for cable mounting in various RF setups.
2390
Pomona Electronics
RF CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE-FEMALE; Panel Mount: NO; Mating Contact Finish: GOLD; MIL Conformity: NO;
CONUFL001-SMD-T
Linx Technologies
CONUFL001-SMD-T by Linx Technologies is a threaded RF connector with dimensions of 0.122" x 0.118" x 0.049". It operates b/w -40°C to 90°C, has a characteristic impedance of 50Ω, and supports frequencies up to 6 GHz. Ideal for surface mount applications in various electronic devices.
R317.072.000
Radiall S A
R317.072.000 by Radiall S A is a RF connector with BAYONET coupling, suitable for 2 GHz applications. Features include POLYTETRAFLUOROETHYLENE insulator, NICKEL finish, and 50 ohm impedance. Ideal for high-frequency communication systems requiring a max operating temperature of 165 °C and VSWR of 1.8.
73415-3590
Molex
Molex 73415-3590 RF SMP Connector features 50 ohm impedance, gold shell finish, and PTFE insulator. Ideal for applications requiring high-frequency signal transmission up to 40 GHz in -65 to 165°C environments. Suitable for surface mount board mounting with male contact gender.
1211-66195-TD
Sv Microwave
RF SMP CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
PL455ACWS-202
Vertiv
Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Total No. of Contacts: 1; Termination Type: CRIMP; Body or Shell Style: PLUG;
SF4546-6010
RF CONNECTOR;
SF9411-6000
OTHER RF CONNECTOR;
FAA.1D.694.CNL
Lemo Usa
FAA.1D.694.CNL by Lemo Usa is a panel mount RF connector with snap coupling, polyamide insulator, and solder termination. It features a male contact gender and plug body style for straight mounting applications in the RF field.
5-1814826-3
TE Connectivity
TE Connectivity 5-1814826-3 RF Connector features threaded coupling, polypropylene insulator, and nickel shell finish. With 75 ohm impedance and RG 6 cable compatibility, it is ideal for commercial applications up to 2 GHz frequency range. The panel mount connector has a durability of 50 cycles and operates b/w -55°C to 85°C temperatures.
MM4829-2702RA4
Murata Manufacturing
Murata MM4829-2702RA4 RF connector has 0.1 dB insertion loss, 50 ohm impedance, and 6 GHz max operating frequency. Ideal for commercial applications, it features a gold termination finish and withstands up to 500 cycles with a durability of 90°C max temp.
73415-3030
Molex 73415-3030 RF SMP Connector features 0.177" body diameter, 0.1 dB insertion loss, and 5000000000 ohm insulation resistance. Ideal for applications requiring a durable RF connector with a characteristic impedance of 50 ohm, such as in commercial settings up to 40 GHz frequency.
SF8015-6002
SF8015-6002 by Sv Microwave is a threaded RF connector with 0.312" body diameter and 0.375" depth. It operates b/w -55°C to 135°C, has 50 ohm impedance, and supports up to 40 GHz frequency. Ideal for cable mounting applications requiring male plug connectors with VSWR of 1.25 or less.
145-0701-601
Cinch Connectivity Solutions
RF SMK CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD (50); Panel Mount: YES; Insertion Loss: .37 dB;
CBJR70A
Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Diameter: .38 inch; Mounting Option-1: LOCKING; Body or Shell Style: JACK;
3-1532004-2
TE Connectivity's 3-1532004-2 is a threaded RF connector with a voltage standing wave ratio of 1.2 and a characteristic impedance of 93 ohm. It is commonly used in cable applications, offering multiple mating parts and solder termination for male contacts. Its right angle mounting style makes it suitable for frequencies up to 2 GHz.
20566-001E-01
I-pex
20566-001E-01 by I-pex is a RF MHF CONNECTOR with SNAP coupling type. It has gold (Au) termination contact finish with nickel (Ni) barrier. This male receptacle connector is suitable for surface mount applications and offers multiple mating parts availability.
SMP-FS-LDPCT
SMP-FS-LDPCT by Amphenol is a RF SMP connector with 50 ohm impedance, gold shell finish, and 12 GHz operating frequency. It is used in commercial applications for board mounting with male contact gender and PTFE insulator material. Withstanding voltage of 700VAC, it offers durability up to 500 cycles at temperatures ranging from -65 to 165°C.
96_MMPX-50-0-2/111_NM-1
Huber+suhner Ag
96_MMPX-50-0-2/111_NM-1 by Huber+suhner Ag is a threaded RF connector with a body diameter of 0.138" and depth of 0.154". It has a max operating frequency of 67 GHz, characteristic impedance of 50 ohm, and can withstand temperatures from -65 to 155 °C. Ideal for commercial applications requiring durable, high-frequency connections.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved