Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FIELD PROGRAMMABLE GATE ARRAY; Form Of Terminal: BALL; No. of Terminals: 325; Package Code: TFBGA; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): 240;
Median Price
$183.221
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Digiode
Semicontronic
$6.000
$5.850
$5.820
AZTECH Wire
$16.128
Advanced Electronics
$19.515
$18.540
Ampacity Inc.
$33.000
Corohmni
$153.649
Aztec Data Supply Inc.
$157.660
Continental Prestige Electronics
$179.557
Fulton Briggs Corp.
Argo Parts USA
Corphita
Bastille Electronics
Field Programmable Gate Arrays (FPGA) M2S090-FCS325I attributes and parameters. Explore more Field Programmable Gate Arrays (FPGA) devices from Microsemi
Programmable IC Type:
No. of Logic Cells:
No. of Inputs:
No. of Outputs:
Technology:
Sub-Category:
Additional Features:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Power Supplies:
Minimum Operating Temperature:
Maximum Operating Temperature:
Peak Reflow Temperature:
Peak Reflow Time:
Package Body Material:
Surface Mountable:
Package Style:
Package Code:
Package Shape:
Length:
Width:
Maximum Seated Height:
Package Equivalence Code:
Terminal Position:
Terminal Style:
Terminal Finish:
Terminal Pitch:
No. of Terminals:
JESD-30 Code:
JESD-609 Code:
Qualified:
M2S090-FCS325I Programmable ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Datasheet 11/Jan/2023 Datasheet Rev 16/Jun/2022
PCN Assembly/Origin - Manufacturing Change 23/Feb/2021
Microsemi Corporation, a wholly owned subsidiary of Microchip Technology Inc. (Nasdaq: MCHP), offers a comprehensive portfolio of semiconductor and system solutions for communications, defense & security, aerospace and industrial markets. Products include high-performance and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and synchronization devices and precise time solutions, setting the world's standard for time; voice processing devices; RF solutions; discrete components; enterprise storage and communication solutions, security technologies and scalable anti-tamper products; Ethernet solutions; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, California.
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
Sangdest Microelectronics (Nanjing)
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
SMBJ18CA
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
Daco Semiconductor
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sensitron Semiconductor
2N2222A
Digitron Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
XC6SLX25T-3CSG324C
Xilinx
Xilinx XC6SLX25T-3CSG324C FPGA features 24051 logic cells, 1879 CLBs, and 862 MHz max clock frequency. Ideal for applications requiring high-speed processing such as telecommunications, networking, and industrial automation. Package style: Grid Array, low profile with 0.8mm terminal pitch.
EP4CE6F17I8LN
Altera
FIELD PROGRAMMABLE GATE ARRAY; Form Of Terminal: BALL; No. of Terminals: 256; Package Code: LBGA; Package Shape: SQUARE; Surface Mount: YES;
EP4CE55F23I7N
Intel
EP4CE55F23I7N by Intel is a FPGA with 55856 logic cells, 3491 CLBs, and a max clock frequency of 472.5 MHz. It is used in applications requiring high-speed processing and programmable logic capabilities, such as telecommunications equipment and industrial automation systems.
5CEBA2F17C8N
Intel's 5CEBA2F17C8N FPGA boasts 25000 logic cells, 128 inputs/outputs, and operates at a max temp of 85°C. Ideal for applications requiring high-speed data processing and complex algorithm implementations in various industries.
10M02SCU169C8G
The Intel 10M02SCU169C8G FPGA features 2000 logic cells, 125 CLBs, and 246 inputs/outputs. With a max supply voltage of 3.15V, it is ideal for applications requiring high-performance programmable ICs in a compact square package with ball terminals.
XC5VLX20T-1FFG323C
Xilinx XC5VLX20T-1FFG323C FPGA features 19968 logic cells, 1560 CLBs, and 172 inputs/outputs. Utilized in applications requiring high-speed processing with a max operating temperature of 85°C. Package style is grid array with a square shape and ball terminals for surface mount assembly.
M2S090TS-1FG484I
Microchip Technology
M2S090TS-1FG484I by Microchip Technology is a PLASTIC/EPOXY FPGA with 86184 logic cells, 267 inputs/outputs. Operating at 1.14-1.26V, it has a temp range of -40 to 100°C. Ideal for applications requiring high-speed data processing and complex algorithms in compact designs.
XC7A100T-3FTG256E
Xilinx XC7A100T-3FTG256E FPGA features 101440 logic cells, 7925 CLBs, and a max clock frequency of 1412 MHz. Ideal for applications requiring high-speed processing such as telecommunications, networking, and industrial automation.
XC7A35T-2FTG256I
Xilinx XC7A35T-2FTG256I is a FPGA with 33280 logic cells, 2600 CLBs, and max clock frequency of 1286 MHz. Ideal for industrial applications requiring high-speed processing and low power consumption. Package style: Grid Array, Low Profile, Fine Pitch.
EP2C8Q208C8N
EP2C8Q208C8N by Intel is a Field Programmable Gate Array (FPGA) with 8256 logic cells and 516 configurable logic blocks (CLBs). It operates at a max clock frequency of 402.5 MHz and is commonly used in applications requiring high-speed data processing and programmable logic capabilities.
XC6SLX75-2CSG484I
Xilinx XC6SLX75-2CSG484I FPGA features 74637 logic cells, 5831 CLBs, and max clock frequency of 667 MHz. Ideal for industrial applications requiring high-speed processing and programmable ICs with a supply voltage range of 1.14V to 1.26V.
10M08SCM153I7G
Intel's 10M08SCM153I7G FPGA features 8000 logic cells, 500 CLBs, and 250 inputs/outputs. With a max supply voltage of 3.15V, it is ideal for industrial applications requiring high-performance programmable ICs in a compact square package with grid array style and 0.5mm terminal pitch.
XC7S25-1FTGB196I
Xilinx XC7S25-1FTGB196I FPGA offers 23360 logic cells, 1825 CLBs, and 1098 MHz max clock frequency. Ideal for industrial applications requiring high-speed processing in a compact form factor with a wide operating temperature range from -40 to 100 °C.
10CL010YU256I7G
The Intel 10CL010YU256I7G is a field programmable gate array (FPGA) with 645 CLBs. It has a max supply voltage of 1.25V and operates in temperatures ranging from -40 to 100°C. This FPGA is commonly used in industrial applications for its versatility and compact size (14mm x 14mm).
10M08SCU169C8G
FIELD PROGRAMMABLE GATE ARRAY; Grading Of Temperature: OTHER; Form Of Terminal: BALL; No. of Terminals: 169; Package Code: BGA; Package Shape: SQUARE;
XC3SD1800A-4CSG484C
The Xilinx XC3SD1800A-4CSG484C FPGA features 37440 logic cells, 4160 CLBs, and 1800000 equivalent gates. It operates at a max clock frequency of 250 MHz and is suitable for applications requiring high-speed processing and programmable ICs in commercial extended temperature environments.
10M25DAF484I7G
The Intel 10M25DAF484I7G is a FPGA with 25000 logic cells, 1563 CLBs, and 360 inputs/outputs. It operates at temperatures from -40 to 100 °C and has a supply voltage range of 1.15-1.25 V. Ideal for industrial applications requiring high-performance programmable ICs in a compact square grid array package.
XC6SLX9-3TQG144I
The Xilinx XC6SLX9-3TQG144I is a FPGA with 9152 logic cells, 715 CLBs, and 102 inputs/outputs. It operates at max frequency of 862 MHz and supports supply voltages of 1.2V, 2.5/3.3V. Ideal for industrial applications requiring high-speed processing in compact form factors with low power consumption.
M1AGL250V5-FGG144I
Microsemi
FIELD PROGRAMMABLE GATE ARRAY; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: BALL; No. of Terminals: 144; Package Code: LBGA; Package Shape: SQUARE;
XC7A12T-2CPG238I
Xilinx XC7A12T-2CPG238I FPGA features 12800 logic cells, 1000 CLBs, and a max clock frequency of 1286 MHz. Ideal for industrial applications requiring high-speed processing and programmable ICs in a compact square package with low profile grid array style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
M2S090-FCSG325
FIELD PROGRAMMABLE GATE ARRAY; Form Of Terminal: BALL; No. of Terminals: 325; Package Code: TFBGA; Package Shape: RECTANGULAR; JESD-609 Code: e1;
Microchip Technology's M2S090-FCSG325 FPGA offers 86184 logic cells, 180 inputs/outputs, and operates at a voltage range of 1.14V to 1.26V. Ideal for applications requiring high-speed processing and programmable logic in compact form factors with a grid array package style.
M2S090-FCSG325I
FIELD PROGRAMMABLE GATE ARRAY; Form Of Terminal: BALL; No. of Terminals: 325; Package Code: TFBGA; Package Shape: RECTANGULAR; Technology Used: CMOS;
Microchip Technology's M2S090-FCSG325I FPGA features 86184 logic cells, 180 inputs/outputs, and operates at a max supply voltage of 1.26V. Ideal for applications requiring high-speed processing and programmable logic in compact form factors.
M2S090-FCS325
FIELD PROGRAMMABLE GATE ARRAY; Form Of Terminal: BALL; No. of Terminals: 325; Package Code: TFBGA; Package Shape: RECTANGULAR; Pitch Of Terminal: .5 mm;
Microchip Technology's M2S090-FCS325 FPGA boasts 86184 logic cells, 180 inputs/outputs, and a max supply voltage of 1.26V. Ideal for applications requiring high-performance computing in compact spaces with its thin profile grid array package style.
M2S090-FCS325I
Microchip Technology's M2S090-FCS325I FPGA boasts 86184 logic cells, 180 inputs/outputs, and operates at a supply voltage range of 1.14V to 1.26V. Ideal for applications requiring high-density programmable logic solutions in compact form factors with fine pitch grid arrays.
M2S010-VFG400I
Microchip Technology's M2S010-VFG400I FPGA offers 12084 logic cells, 195 inputs/outputs, and operates at a supply voltage range of 1.14V to 1.26V. Ideal for applications requiring high-density programmable logic in a compact grid array package with low profile and fine pitch design.
FIELD PROGRAMMABLE GATE ARRAY; Form Of Terminal: BALL; No. of Terminals: 400; Package Code: LFBGA; Package Shape: SQUARE; Nominal Supply Voltage (V): 1.2;
M2S010-TQG144I
FIELD PROGRAMMABLE GATE ARRAY; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE; Maximum Supply Voltage: 1.26 V;
M2S010-TQG144I by Microchip Technology is a 12084 logic cell FPGA with 84 inputs/outputs. It operates b/w -40 to 100 °C and has a supply voltage range of 1.14V to 1.26V. Ideal for applications requiring high-density programmable logic in compact form factors.
FIELD PROGRAMMABLE GATE ARRAY; Form Of Terminal: BALL; No. of Terminals: 484; Package Code: BGA; Package Shape: SQUARE; Length: 23 mm;
FIELD PROGRAMMABLE GATE ARRAY; Form Of Terminal: BALL; No. of Terminals: 484; Package Code: BGA; Package Shape: SQUARE; Finishing Of Terminal Used: Tin/Lead (Sn/Pb);
M2S090TS-1FGG484I
FIELD PROGRAMMABLE GATE ARRAY; Form Of Terminal: BALL; No. of Terminals: 484; Package Code: BGA; Package Shape: SQUARE; Moisture Sensitivity Level (MSL): 3;
M2S090TS-1FGG484I by Microchip Technology is a PLASTIC/EPOXY FPGA with 86184 logic cells, 267 inputs/outputs. Operating at 1.14-1.26V, it's ideal for applications requiring high performance in a compact GRID ARRAY package with TIN SILVER COPPER terminals.
M2S010TS-1VFG256I
FIELD PROGRAMMABLE GATE ARRAY; Form Of Terminal: BALL; No. of Terminals: 256; Package Code: LFBGA; Package Shape: SQUARE; Minimum Supply Voltage: 1.14 V;
FIELD PROGRAMMABLE GATE ARRAY; Form Of Terminal: BALL; No. of Terminals: 256; Package Code: LFBGA; Package Shape: SQUARE; No. of Logic Cells: 12084;
M2S050T-1FGG484I
FIELD PROGRAMMABLE GATE ARRAY; Form Of Terminal: BALL; No. of Terminals: 484; Package Code: BGA; Package Shape: SQUARE; No. of Inputs: 267;
FIELD PROGRAMMABLE GATE ARRAY; Form Of Terminal: BALL; No. of Terminals: 484; Package Code: BGA; Package Shape: SQUARE; No. of Outputs: 267;
M2S090T-1FCSG325I
FIELD PROGRAMMABLE GATE ARRAY; Form Of Terminal: BALL; No. of Terminals: 325; Package Code: TFBGA; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved