Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DSPIC33EV256GM104-I/PT by Microchip is a 16-bit DSP with 262144 ROM words, 32768 RAM words, and 24-Ch 12-Bit ADC channels. It operates at up to 40 MHz, suitable for industrial applications requiring high-speed signal processing and control tasks. With features like BOR, PWM(6), and CAN connectivity, it's ideal for demanding digital signal processing and control applications.
Median Price
$5.200
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$4.330
1k+ parts
-
10k+ parts
Microchip Technology
$3.980
$3.780
DigiKey
Master Electronics
$3.850
$3.570
Verical
$4.684
$4.336
Nova Conductors
$4.947
NAC Semi
$5.440
$4.930
$4.510
TME
$5.770
$4.840
Vyrian
IBS Electronics
$5.400
$5.007
RLX Solution Inc.
ComSIT USA
ComSIT Distribution GmbH
Continental Prestige Electronics
$4.917
$4.819
Semicontronic
$8.380
$8.170
$8.129
Ampacity Inc.
Advanced Electronics
$26.653
$25.321
Corohmni
$41.803
Aztec Data Supply Inc.
$75.206
XL Components Corporation
QualityLine Systems
Robosynatics
$66.597
$65.238
Lucentia Tech
Argo Parts USA
Marpe Global Electronics
Lixinc
Bastille Electronics
This material makes the product lightweight and durable, ideal for portable devices.
Allows for easy and efficient PCB assembly, saving time and effort during manufacturing.
Provides flexibility in power supply options and ensures compatibility with a wide range of systems.
The wide RAM width allows for faster data processing and more efficient multitasking capabilities.
Ensures high-quality and reliable performance, meeting industry standards for automotive applications.
The square shape is space-efficient and simplifies PCB design, making it suitable for compact electronic devices.
The 16-bit size offers high computational power and precision for demanding signal processing tasks.
Operates at a standard voltage level, making it compatible with a wide range of power sources.
The large number of terminals allows for versatile connectivity options and easy integration into complex systems.
The thin profile design saves space and allows for dense PCB layouts, ideal for miniaturized devices.
Digital Signal Processors (DSPs) DSPIC33EV256GM104-I/PT attributes and parameters. Explore more Digital Signal Processors (DSPs) devices from Microchip Technology
ADC Channels:
Address Bus Width:
Barrel Shifter:
Bit Size:
Boundary Scan:
Maximum Clock Frequency:
DAC Channels:
DMA Channels:
External Data Bus Width:
Format:
Integrated Cache:
Internal Bus Architecture:
JESD-30 Code:
JESD-609 Code:
Length:
Low Power Mode:
No. of DMA Channels:
No. of External Interrupts:
No. of I/O Lines:
No. of Terminals:
No. of Timers:
On Chip Data RAM Width:
On Chip Program ROM Width:
Maximum Operating Temperature:
Minimum Operating Temperature:
PWM Channels:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
RAM Bytes:
RAM Words:
ROM Words:
ROM Programmability:
Screening Level:
Maximum Seated Height:
Speed:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
Peripheral IC Type:
Data EEPROM Size:
Connectivity:
Peripherals:
Analog To Digital Convertors:
DSPIC33EV256GM104-I/PT Peripheral ICs trade compliance attributes, and parameters.
ECCN
3A991.A.2
ECCN Governance
EAR
HTS
8542.31.00.01
SB
8542.31.00.00
PCN Assembly/Origin - Bond Wire 12/Feb/2020
PCN Packaging - Label and Packing Changes 23/Sep/2015 MBB/Label Chgs 16/Nov/2018
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Surge Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
ROHM
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358DT
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
2N7002
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
DSPIC33EV128GM102-I/SS
DSPIC33EV128GM102-I/SS by Microchip is a 16-bit DSP with 8192 RAM words, 40 MHz clock frequency, and 5 V nominal voltage. Ideal for industrial applications requiring a digital signal processor with 7 timers, PWM channels, and low power mode capabilities.
TMS320F28235ZJZQR
Texas Instruments
TMS320F28235ZJZQR by Texas Instruments is a 32-bit DSP with 32-bit external data bus width, 16-bit address bus width, and max clock frequency of 35 MHz. Ideal for automotive applications due to AEC-Q100 screening level, it features 6 DMA channels, PWM channels, and low power mode for efficient performance.
DSPIC33EP512MU810-I/PT
DSPIC33EP512MU810-I/PT by Microchip Technology is a 16-bit DSP with 60 MHz clock frequency, 32-Ch 10-Bit ADCs, and 9 timers. Ideal for industrial applications requiring high-speed processing, it features low power mode, multiple peripherals (BOR, COMPARATOR(3), POR), and connectivity options like I2C(2) and SPI(4).
PIC24EP512GU810T-I/BG
PIC24EP512GU810T-I/BG by Microchip Technology is a 16-bit DSP with 60 MHz clock frequency, 3.3V supply, and 53248 RAM words. Ideal for industrial applications, it features 9 timers, 15 DMA channels, and low power mode for efficient processing in digital signal control systems.
DSPIC33EP32MC202-I/MM
DSPIC33EP32MC202-I/MM by Microchip Technology is a 16-bit DSP with 4096 RAM words, operating at up to 60 MHz. Ideal for industrial applications, it features 3.3V power supplies, FLASH ROM programmability, and low power mode for efficient performance in digital signal processing tasks.
DSPIC33FJ256GP506A-I/PT
DSPIC33FJ256GP506A-I/PT by Microchip is a 16-bit DSP with max clock freq of 40MHz. Operating at 3.3V, it's ideal for industrial applications requiring FLASH ROM programmability and CMOS technology. With a temp range of -40 to 85°C, this quad-terminal digital signal processor is suitable for various signal processing and control tasks.
DSPIC33CK128MP202-H/2N
DSPIC33CK128MP202-H/2N by Microchip Technology is a 16-bit digital signal processor with 64 MHz clock frequency, 3.6 V supply voltage, and AEC-Q100 screening for automotive applications. It features 16384 RAM words, FLASH ROM programmability, and low power mode for efficient processing in compact designs. With 4 DMA channels and 4 serial I/Os, it offers versatile control capabilities in a small form factor chip carrier package.
DSPIC33CK128MP502-I/SS
DSPIC33CK128MP502-I/SS by Microchip Technology is a 16-bit digital signal processor with 64 MHz clock frequency, 16384 RAM words, and 3.6V max supply voltage. Ideal for industrial applications requiring high-speed processing, it features 4 DMA channels, flash ROM programmability, and low power mode for efficient operation.
DSPIC33CK256MP502-E/SS
DSPIC33CK256MP502-E/SS by Microchip Technology is a 16-bit DSP with 64 MHz clock frequency, 3.6 V supply voltage, and 42.5 mA max current. Ideal for automotive applications, it features 24-bit program ROM width, FLASH programmability, and AEC-Q100 screening level compliance.
TNETV2501INPGF
TNETV2501INPGF by Texas Instruments is a 32-bit DSP with 20-bit address bus width, operating b/w -40 to 85°C. It features low power mode, boundary scan, and CMOS technology. Ideal for industrial applications requiring high-performance digital signal processing in a compact flatpack package.
TMS320F28335ZJZA
TMS320F28335ZJZA by Texas Instruments is a 32-bit DSP with 150 MHz clock frequency, 176 terminals, and 68 RAM words. Ideal for industrial applications requiring high-speed processing, it features 8 external interrupts, 21 timers, and ADC channels for precise data acquisition.
TMS320F2812PGFAG4
TMS320F2812PGFAG4 by Texas Instruments is a 32-bit DSP with 150 MHz clock frequency, 18432 RAM words, and 16-bit data RAM width. Ideal for industrial applications requiring high-speed signal processing, it features low power mode, multiple internal bus architecture, and 8 timers for efficient performance.
ADSP-BF538BBCZ-5A
Analog Devices
ADSP-BF538BBCZ-5A by Analog Devices is a 32-bit DSP with 20-bit address bus, operating at max 50 MHz. Ideal for industrial applications, it features low power mode, barrel shifter, and CMOS technology. Package style includes grid array with 316 terminals in a square shape measuring 17mm x 17mm.
DSPIC33CK512MP606-H/PT
DSPIC33CK512MP606-H/PT by Microchip Technology is a 16-bit DSP with 64 MHz clock frequency, 3.6 V max supply voltage, and 65536 RAM words. Ideal for digital signal processing applications in automotive electronics due to AEC-Q100 screening level and low power mode support.
DSPIC33FJ12MC202-I/ML
DSPIC33FJ12MC202-I/ML by Microchip is a 16-bit DSP with 40 MHz clock frequency, ideal for industrial applications. It operates b/w -40 to 85 °C and has a supply voltage range of 3-3.6 V. With flash ROM programmability, it's suitable for digital signal processing tasks in compact designs.
PIC24EP256MC202-I/SS
PIC24EP256MC202-I/SS by Microchip Technology is a 16-bit DSP with 3.3V supply, 60MHz clock frequency, and 32768 RAM words. Ideal for industrial applications, it features 5 timers, flash ROM programmability, and low power mode for efficient performance in digital signal processing tasks.
DSPIC33EP128MC504T-I/TL
DSPIC33EP128MC504T-I/TL by Microchip is a 16-bit DSP with max clock freq of 60MHz. Operating temp range -40 to 85°C, supply voltage 3-3.6V, and max supply current of 150mA. Ideal for industrial applications requiring high-speed signal processing in a compact square package style.
DSPIC33FJ256MC510A-I/PT
DSPIC33FJ256MC510A-I/PT by Microchip Technology is a 16-bit digital signal processor with 3.3V power supply, 40 MHz clock frequency, and 16384 RAM words. It is ideal for industrial applications requiring high-speed processing, featuring 11 timers, 8 DMA channels, and flash ROM programmability for efficient control and signal processing tasks.
DVC5416PGE160IDWLD
Texas Instruments DVC5416PGE160IDWLD is a 144-terminal DSP with 16-bit external data bus, operating at max 20 MHz clock frequency. Ideal for industrial applications, it features low power mode and barrel shifter, with temperature range from -40 to 100°C.
TMS320F28335ZJZQR
TMS320F28335ZJZQR by Texas Instruments is a 32-bit DSP with 150 MHz clock frequency, 68 RAM words, and 32-bit external data bus width. Ideal for automotive applications due to AEC-Q100 screening level, it features 8 external interrupts and 21 timers for efficient signal processing.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DSPIC33EP512MU810-I/PF
DSPIC33EP512MU810-I/PF by Microchip Technology is a 16-bit digital signal processor with 60 MHz clock frequency, 53248 RAM words, and 320 mA max supply current. Ideal for industrial applications requiring high-speed processing, it features 9 timers, 15 DMA channels, and FLASH ROM programmability.
DSPIC33EP512MU814-I/PH
DSPIC33EP512MU814-I/PH by Microchip is a 16-bit DSP with 53248 RAM words, operating at up to 60 MHz. Ideal for industrial applications, it features 3.3V supply voltage, FLASH ROM programmability, and 15 DMA channels for efficient data processing.
DSPIC33FJ256GP710-I/PF
DSPIC33FJ256GP710-I/PF by Microchip is a 16-bit DSP with max clock freq of 40 MHz, operating temp range -40 to 85 °C. It has 100 terminals, flash ROM programmability, and is ideal for industrial applications requiring digital signal processing capabilities.
DSPIC30F6014A-30I/PF
DSPIC30F6014A-30I/PF by Microchip is a 16-bit DSP with max clock freq of 40 MHz, operating temp range -40 to 85 °C. Ideal for industrial applications, it features flash ROM programmability, operates at supply voltages of 3/5 V, and has a package style of flatpack thin profile.
DSPIC33EP256MU806-I/PT
DSPIC33EP256MU806-I/PT by Microchip Technology is a 16-bit DSP with 28672 RAM words and 24-Ch 10-Bit ADC channels. Ideal for industrial applications, it offers 9 timers, I2C(2), SPI(4), UART(4) connectivity, and operates at a max clock frequency of 60 MHz. With low power mode and barrel shifter features, it's suitable for digital signal processing tasks.
DSPIC30F6014A-30I/PT
DSPIC30F6014A-30I/PT by Microchip is a 16-bit digital signal processor with max clock frequency of 40 MHz. Operating temp range from -40 to 85 °C, suitable for industrial applications. Features flash ROM programmability, 80 terminals in a flatpack package style.
DSPIC33CK256MP508-I/PT
DIGITAL SIGNAL PROCESSOR, CONTROLLER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 80; Package Code: TFQFP; Package Shape: SQUARE;
DSPIC33EP512MU814-I/PL
DSPIC33EP512MU814-I/PL by Microchip Technology is a 16-bit digital signal processor with a max clock frequency of 60 MHz. It features 32-channel, 10-bit analog-to-digital converters and offers connectivity options such as I2C, SPI, and UART. This DSP is commonly used in industrial applications requiring high-speed processing and low power consumption.
DSPIC30F4011-30I/PT
DIGITAL SIGNAL PROCESSOR, CONTROLLER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 44; Package Code: TQFP; Package Shape: SQUARE;
DSPIC33EP512MC806-I/PT
DSPIC33EP512MC806-I/PT by Microchip Technology is a 16-bit DSP with 53248 RAM words and 548864 ROM words. It operates at up to 60 MHz, has 24-Ch 10-Bit ADCs, and offers connectivity via I2C(2), SPI(4), UART(4). Ideal for industrial applications requiring high-speed signal processing and multiple peripherals.
DSPIC33CK256MP506-I/PT
DSPIC33CK256MP506-I/PT by Microchip Technology is a 16-bit digital signal processor with 64 MHz clock frequency, 3.6 V supply voltage, and 24-bit on-chip program ROM width. Ideal for industrial applications requiring high-speed processing, it features low power mode, boundary scan support, and multiple internal bus architecture for efficient data handling.
DSPIC33EP512MC202-E/MM
DIGITAL SIGNAL PROCESSOR, CONTROLLER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 28; Package Code: HVQCCN; Package Shape: SQUARE;
DSPIC33EP512MU814-E/PH
DIGITAL SIGNAL PROCESSOR, CONTROLLER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 144; Package Code: TFQFP; Package Shape: SQUARE;
DSPIC33CK256MP506-I/MR
DSPIC33CK256MP506-I/MR by Microchip Technology is a 16-bit DSP with 64 MHz clock frequency, 3.6 V max supply voltage, and 24576 RAM words. Ideal for industrial applications, it features flash ROM programmability, low power mode, and multiple internal bus architecture for efficient digital signal processing tasks.
DSPIC33EV256GM106-I/PT
DSPIC33EV256GM106-I/PT by Microchip is a 16-bit DSP with 262144 ROM words, 32768 RAM words, and 36-Ch 12-Bit ADC channels. It operates at up to 40 MHz, suitable for industrial applications requiring CAN, I2C, SPI connectivity. With low power mode and multiple peripherals like PWM(6) and TIMER(7), it's ideal for embedded systems needing high-speed processing.
DSPIC33EP256MU806-I/MR
DSPIC33EP256MU806-I/MR by Microchip Technology is a 16-bit digital signal processor with a max clock frequency of 60 MHz. It has 28672 RAM words and can operate in low power mode. This DSP is commonly used in industrial applications requiring high-speed processing and efficient power consumption.
DSPIC33EP512MU810-E/PT
DSPIC33EP512MU810-E/PT by Microchip is a 16-bit DSP with 60 MHz clock frequency, 53248 RAM words, and 3.3V supply voltage. Ideal for automotive applications, it features 9 timers, 15 DMA channels, and operates in low power mode to optimize performance.
DSPIC33EP512MU810-I/BG
DSPIC33EP512MU810-I/BG by Microchip Technology is a 16-bit DSP with 60 MHz clock frequency, 3.3V supply, and 53248 RAM words. Ideal for industrial applications, it features 9 timers, 15 DMA channels, and FLASH ROM programmability for efficient digital signal processing tasks.
DSPIC33CK256MP502-I/SS
DIGITAL SIGNAL PROCESSOR, CONTROLLER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SSOP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved