Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ATA6563-GAQW0 by Microchip Tech is a CAN transceiver with 5 Mbps data rate, AEC-Q100 screening, and 8 terminals. Ideal for automotive applications due to its -40 to 150 °C operating temp range and small outline package style. Offers high reliability with TS 16949 certification and gull wing terminal form.
Median Price
$0.978
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Nova Conductors
1+ parts
$0.813
100+ parts
-
1k+ parts
10k+ parts
Maritex
$1.143
VNN
Vyrian
Aranea Global
$0.797
$0.765
Continental Prestige Electronics
$0.805
$0.789
Argo Parts USA
Vigor
$2.000
Corohmni
$6.468
AZTECH Wire
$6.671
Aztec Data Supply Inc.
$10.580
Modulus Dynamics
$11.032
Semicontronic
$17.000
$16.575
$16.490
Advanced Electronics
$17.838
$16.946
Ampacity Inc.
$801.000
iodParts Technologies Inc.
Lixinc
Microchip USA
A-Z Elektronik GmbH
Alle Elektronik GmbH
Marpe Global Electronics
QualityLine Systems
XL Components Corporation
Authorized Procurement Solutions
Plastic/Epoxy material is known for its durability and resistance to temperature fluctuations, making this network interface more reliable for various applications.
Having 8 terminals allows for efficient connectivity and communication between devices, making this network interface suitable for complex network setups.
With a high maximum operating temperature of 150°C, this network interface can withstand extreme environmental conditions, ensuring reliable performance in harsh environments.
The Gull Wing terminal form factor is known for its stability and secure attachment to circuit boards, enhancing the overall durability and longevity of the network interface.
With a data rate of 5 Mbps, this network interface offers fast and efficient data transmission, making it an ideal choice for applications requiring high-speed communication.
Network Interfaces ATA6563-GAQW0 attributes and parameters. Explore more Network Interfaces devices from Microchip Technology
Data Rate:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
No. of Transceivers:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Screening Level:
Maximum Seated Height:
Maximum Supply Current:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
ATA6563-GAQW0 Telecommunications trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - ATA6562/ATA6563 17/Dec/2021 ATA6562/ATA6563 25/Jun/2020
PCN Assembly/Origin - Cancel 12/Jan/2022
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
BAV99
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Yageo
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Surge Components
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
ULN2803ADWG4
Texas Instruments
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Leshan Radio
LM2675M-ADJ/NOPB
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
Sensitron Semiconductor
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
KSZ9031MNXCC
Microchip Technology
KSZ9031MNXCC by Microchip Tech is a 64-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temp range: 0-70°C, voltage supply: 1.2V. Ideal for network interfaces in commercial applications due to its compact square chip carrier package design.
TCAN1042HVD
TCAN1042HVD by Texas Instruments is an Ethernet transceiver with a data rate of 2 Mbps. It operates b/w -55 to 125°C, suitable for military-grade applications. This small outline package has 8 terminals and supports a nominal voltage of 5V.
TCAN4550RGYTQ1
TCAN4550RGYTQ1 by Texas Instruments is an automotive-grade interface circuit with a 12V supply voltage. It operates at temperatures ranging from -40 to 125°C and supports data rates up to 8 Mbps. This chip carrier package with 20 terminals is designed for network interfaces in automotive applications.
KSZ8873MLL
Micrel
LAN SWITCHING CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE;
TCAN1044AVDDFRQ1
TCAN1044AVDDFRQ1 by Texas Instruments is a CAN FD transceiver with 8 Mbps data rate, operating at -40 to 150°C. It features a small outline package with dual terminals and nickel palladium gold finish, suitable for automotive applications meeting AEC-Q100 standards. The device has a nominal voltage of 5V and max supply current of 130mA, making it ideal for network interfaces in harsh environments.
RN2483A-I/RM104
Microchip Technology's RN2483A-I/RM104 is a surface mount Ethernet transceiver with 47 terminals. Operating temperature ranges from -40 to 85°C, suitable for industrial use. Package size of 17.78mm width, 26.67mm length, and 3.367mm height makes it ideal for compact network interfaces applications.
NCV7342D10R2G
NCV7342D10R2G by Onsemi is a CMOS interface circuit with 8 terminals, operating at 5V. It has a data rate of 1 Mbps and is AEC-Q100 compliant for automotive applications. With a compact small outline package style, it is designed for surface mount assembly in harsh environments.
TJA1042T/CM,118
NXP Semiconductors
NXP Semiconductors' TJA1042T/CM,118 is a network interface IC with 8 terminals and AEC-Q100 screening. Operating at 5V, it supports data rates up to 1 Mbps for automotive applications. The small outline package with dual terminal position makes it suitable for compact designs in harsh environments.
MAX3051ESA+TCJN
Maxim Integrated
INTERFACE CIRCUIT;
DP83620SQX/NOPB
Texas Instruments DP83620SQX/NOPB is a 48-terminal Ethernet transceiver with data rate of 100000 Mbps. Operating temperature range from -40 to 85 °C, suitable for industrial applications. Package style includes chip carrier and very thin profile, making it ideal for surface mount designs.
MCP2562FD-E/SNVAO
MCP2562FD-E/SNVAO by Microchip: CAN FD transceiver for automotive apps. Operates at 8 Mbps data rate, with 5V supply voltage and 70mA max current. AEC-Q100 & TS16949 compliant, temp range -40 to 125°C.
SN65HVD232QDRQ1
SN65HVD232QDRQ1 by Texas Instruments is an automotive-grade interface circuit with a data rate of 1 Mbps. It operates at a nominal voltage of 3.3 V and has a max supply current of 17 mA. This small outline package is ideal for network interfaces in automotive applications.
ISOW1044BDFMR
ISOW1044BDFMR by Texas Instruments is a CAN FD transceiver with 5 Mbps data rate, operating b/w -40 to 125°C. It features a small outline package with 20 terminals and requires 211 mA supply current at 5V. Ideal for network interfaces in various applications requiring high-speed communication in harsh environments.
KSZ8061RNBW-TR
Microchip Technology's KSZ8061RNBW-TR is an Ethernet transceiver IC with 100 Mbps data rate. It operates in industrial temperature range (-40 to 105°C) and has AEC-Q100 screening level for automotive applications. The chip carrier package style with 32 terminals, matte tin finish, and 0.5 mm terminal pitch makes it suitable for surface mount designs.
DP83825IRMQT
Texas Instruments DP83825IRMQT is an Ethernet transceiver with a data rate of 100Gbps. It operates in industrial temperature range (-40 to 85°C) and requires a nominal voltage of 3.3V. The chip carrier package style with 24 terminals makes it suitable for network interfaces in various applications.
TJA1041AT/CM,118
NXP Semiconductors' TJA1041AT/CM,118 is a 14-terminal network interface with 5V supply voltage and 1Mbps data rate. It features AEC-Q100 screening level for automotive applications. The IC is designed in CMOS technology, suitable for telecom interface circuits in compact designs.
TJA1050T/VM
NXP Semiconductors' TJA1050T/VM is an 8-terminal network interface IC with a small outline package. Operating b/w -40 to 125°C, it's ideal for automotive applications. Featuring nickel palladium gold silver terminals, it has a nominal voltage of 5V and terminal pitch of 1.27mm.
SN65HVD234QDRQ1
SN65HVD234QDRQ1 by Texas Instruments is an AEC-Q100 compliant network interface IC with 8 terminals. It operates at -40 to 125°C, supporting a data rate of 1 Mbps at a supply voltage of 3.3V. Ideal for automotive applications requiring robust communication in harsh environments.
LAN9303-ABZJ
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 56; Package Code: HVQCCN; Package Shape: SQUARE;
TJA1028TK/3V3/20/X
NXP Semiconductors' TJA1028TK/3V3/20/X is a LIN transceiver with 8 terminals, operating at -40 to 150°C. It has a supply voltage of 3.3V and max current of 4.5mA, suitable for automotive applications meeting AEC-Q100 standards. This small outline package with heat sink is surface mountable and ideal for telecom networks.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ATA6561-GBQW-N
ATA6561-GBQW-N by Microchip: CAN FD transceiver with 5 Mbps data rate, 70 mA supply current, and 5V nominal voltage. Ideal for automotive applications due to TS16949 screening level and -40 to 150 °C operating temperature range.
ATA6561-GAQW-N
ATA6561-GAQW-N by Microchip Tech is a CAN FD transceiver with 5 Mbps data rate. Operating temp range -40 to 150 °C, it's ideal for automotive applications. With TS 16949 screening level, this SMD package has 8 terminals in a small outline design.
ATA6561-GAQW
ATA6561-GAQW by Microchip is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate. It operates at -40 to 150°C, draws 70 mA max supply current, and has a compact rectangular package suitable for automotive applications.
Atmel
ETHERNET TRANSCEIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Seated Height: 1.8 mm;
ATA6561-GBQW
ATA6561-GBQW by Microchip: AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate, 70 mA supply current, and 5V nominal voltage. Ideal for automotive applications due to -40 to 150 °C operating temperature range and small outline package style.
ETHERNET TRANSCEIVER; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE; Width: 3 mm;
ATA6560-GAQW-N
ATA6560-GAQW-N by Microchip: CAN FD transceiver for automotive apps. Operates at 5 Mbps with 70 mA supply current. Temperature range -40 to 150 °C, TS16949 screening level.
ATA6563-GAQW1
ATA6563-GAQW1 by Microchip: CAN transceiver for automotive apps. Operates at 5 Mbps with 5V supply voltage. AEC-Q100 qualified, TS 16949 compliant, temp range -40 to 125°C.
ATA6563-GBQW1
ATA6563-GBQW1 by Microchip: CAN transceiver for automotive apps. Operates at 5 Mbps with 5V supply voltage. AEC-Q100, TS16949 compliant, -40 to 125°C temp range.
ATA6563-GBQW1-VAO
ATA6563-GBQW1-VAO by Microchip is a CAN FD transceiver with 8 terminals, AEC-Q100 screening, and 5V supply voltage. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and small outline package style.
ATA6563-GBQW0
CAN TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
ATA6560-GAQW
ETHERNET TRANSCEIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Supply Voltage: 5 V;
CAN FD TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ATA6631-GAQW
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE;
LIN TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ATA663254-GBQW-VAO
LIN TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
ATA663254-GBQW
ATA663211-GAQW-V10
LIN TRANSCEIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Seated Height: 1.8 mm;
ATA663254-GBQW-V07
ATA6564-GAQW1
CAN TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved