Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTL-2500G by Lite-on Technology is a 2-element, green single-color LED with peak wavelength of 565nm. It has a max forward current of 0.025A and nominal luminous intensity of 4.2mcd. Ideal for applications requiring compact, energy-efficient lighting solutions in various electronic devices.
Median Price
$0.650
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.220
100+ parts
$0.567
1k+ parts
$0.432
10k+ parts
$0.402
DigiKey
$1.240
$0.648
$0.517
$0.441
Avnet
-
$0.369
$0.364
Verical
$0.552
Future Electronics
$0.410
$0.390
$0.375
Nova Conductors
$0.409
DF Sales Co.
$0.580
Prism Electronics
Chip Stock
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Sunrise Surplus Inc.
Ack Elektronik San.Tic.Ltd.Sti
Vyrian
NAC Semi
$0.746
SPM Sales
ECAB
Aranea Global
$0.401
$0.385
Perfect Parts
Glotronic Ltd.
Having 2 separate LED elements allows for more flexibility in controlling and customizing the lighting effects.
Compact size makes it suitable for a variety of applications where space is limited.
Low forward current consumption for energy efficiency.
Peak wavelength of 565 nm produces a vibrant green light.
Single color LEDs are ideal for applications where consistent light output is needed.
Having 4 terminals provides a secure connection and allows for versatile wiring configurations.
With a high maximum operating temperature, this LED can withstand demanding environmental conditions.
Low profile design makes it suitable for applications with height restrictions.
Rectangular shape allows for easy integration into various electronic devices and equipment.
Wide operating temperature range ensures reliable performance even in cold environments.
Tin/Lead terminal finish provides a reliable and durable connection.
Even at low luminous intensity, this LED can still provide visibility in dark conditions.
Produces a consistent green color at the specified wavelength for visual appeal.
The green color output is versatile and suitable for a wide range of applications.
Bulk packaging is cost-effective and suitable for mass production and industrial applications.
Standard terminal pitch allows for easy integration into existing circuit designs.
Having 2 LEDs in the array provides redundancy and backup in case one LED fails.
Nominal luminous intensity of 4.2 mcd ensures bright and visible light output.
Radial mounting feature allows for easy installation and secure mounting in various applications.
With a maximum forward voltage of 2.8 V, this LED is compatible with a wide range of power sources.
Visible LEDs LTL-2500G attributes and parameters. Explore more Visible LEDs devices from Lite-on Technology
Additional Features:
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Minimum Luminous Intensity:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of LEDs in Array:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Sub-Category:
Terminal Finish:
Terminal Pitch:
LTL-2500G Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Founded in 1975, LITEON embraces being “Best Partner in Opto-Electronic, Eco-Friendly and Intelligent Technologies” as its vision to focus on the development of optoelectronics and key electronic components, and strives to build up competitive edge through resource integration and optimized management. LITEON produces products that are used in a broad range of applications, such as computers, communications, consumer electronics, automotive electronics, LED lighting, cloud computing as well as healthcare. LITEON is a worldwide leading provider of optoelectronics, information technology and storage devices components.
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
SMBJ18CA
Zowie Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Continental Device India
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Formosa Microsemi
Uniohm
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
0462-201-16141
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
CMD17-21VGC/TR8
Cml Technologies & Kg
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: CLEAR; Shape: RECTANGULAR;
LTST-C190GKT
Lite-on Technology
LTST-C190GKT by Lite-on Technology is a 1.1mm GREEN LED with WATER CLEAR lens, operating at -55 to 85 °C. It has a peak wavelength of 565nm, forward current of 0.03A, and viewing angle of 130°. Ideal for surface mount applications requiring a single color LED with max luminous intensity of 9.9mcd.
HLMP-1301-G0000
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.6; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
TLMS1000-GS08
Vishay Intertechnology
TLMS1000-GS08 by Vishay Intertechnology is a 1.6mm SINGLE COLOR LED with peak wavelength of 640nm and max forward current of 0.015A. Ideal for applications requiring RED light emission, such as indicator lights in electronic devices due to its compact size and surface mounting feature.
598-8621-207F
Dialight
Dialight's 598-8621-207F is a dual-color LED with water-clear lens, featuring separate configuration and 2.7mm size. With max forward current of 0.02A, it emits red-orange/green light at 3.5V for applications like indicator lights in electronics due to its compact size and surface mounting feature.
LGQ396-PS-35
Osram Opto Semiconductors
Osram Opto Semiconductors LGQ396-PS-35 is a 1mm single color LED with max. forward current of 0.03A and green color at wavelength. Ideal for surface mount applications, it has a viewing angle of 120° and operates b/w -30 to 85 °C, making it suitable for various lighting solutions.
HLMP-3301
Hewlett Packard
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Shape: ROUND; Maximum Forward Current: .03 A; Minimum Operating Temperature: -55 Cel;
LGQ971-KN-1
The Osram Opto Semiconductors LGQ971-KN-1 is a 1mm single color LED with peak wavelength of 572nm. It has a max forward current of 0.025A and operates b/w -30°C to 85°C. Ideal for surface mount applications, emitting green light at a wide viewing angle of 160°.
KP-2012SRC-PRV
Kingbright Electronic
Kingbright Electronic's KP-2012SRC-PRV is a 1.3mm SINGLE COLOR LED with peak wavelength of 660nm and 100.0mcd luminous intensity. Ideal for applications requiring super bright red illumination, such as indicator lights in electronic devices.
XHP35B-H0-0000-0D0BD40E2
Cree Led
SINGLE COLOR LED;
KP-2012EC
KP-2012EC by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with a peak wavelength of 627nm and max forward current of 0.03A. Ideal for applications requiring HIGH EFFICIENCY RED light emission, such as indicator lights in electronic devices due to its compact size and water clear lens type.
HSMF-C165
Broadcom
HSMF-C165 by Broadcom is a 1.6mm dual-color LED with peak wavelengths of 630nm/570nm, ideal for applications requiring high efficiency red/green illumination. With a max forward current of 0.02A and viewing angle of 120°, it's suitable for surface mount configurations in various electronic devices operating b/w -30°C to 85°C.
HSMF-C155
HSMF-C155 by Broadcom is a dual color LED with separate, 2-element configuration. It has a size of 2.06 mm and a max forward current of 0.02 A. This LED is commonly used in applications that require high efficiency red/green lighting with a viewing angle of 170°.
APT2012SGC
APT2012SGC by Kingbright Electronic is a 1.3mm SUPER BRIGHT GREEN LED with 0.025A forward current, emitting at 565nm peak wavelength. Ideal for surface mount applications, it offers a wide 120° viewing angle and operates b/w -40°C to 85°C temperatures.
597-3301-502F
Dialight's 597-3301-502F is a single color LED with peak wavelength of 570nm and forward voltage of 2.8V. Ideal for surface mount applications, it has a viewing angle of 110° and luminous intensity of 25.0mcd, making it suitable for indicator lights in various electronic devices.
KPT-1608SGC
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: WATER CLEAR; Terminal Pitch: 1.65 mm;
LTST-C190CKT
LTST-C190CKT by Lite-on Technology is a 1.1mm single color LED with peak wavelength of 660nm and max forward current of 0.025A. Ideal for applications requiring a red light source, such as indicator lights in electronic devices. With water clear lens and surface mounting feature, it offers a viewing angle of 130° for versatile usage.
551-3007F
Dialight's 551-3007F is a 3mm DUAL COLOR LED with COMMON BIPOLAR TERMINAL. It has a max forward current of 0.03A, peak wavelengths of 635nm/565nm, and nominal luminous intensity of 4.7/10.0 mcd. Ideal for applications requiring red/green indicator lights with a viewing angle of 60° and radial mounting feature.
VLMRGB6112-00-GS08
Vishay Intertechnology's VLMRGB6112-00-GS08 is a 3-element LED with built-in Zener diode, featuring peak wavelengths of 630/518/468nm. With a max forward current of 0.03A and viewing angle of 60°, it's ideal for applications requiring triple color illumination in compact spaces. Suitable for surface mount installations, this LED has a nominal luminous intensity of 730.0/1030.0/230.0mcd.
PKB-35-F35
Laser Components
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTL-2685HR
LTL-2685HR by Lite-on Technology is a high-efficiency red LED with 8 separate elements, peak wavelength of 635nm, and max forward current of 0.025A. Ideal for applications requiring bright red light emission in compact spaces, such as indicator lights or displays.
LTL-2820G
LTL-2820G by Lite-on Technology is a single color LED array with 8 separate elements. It has a peak wavelength of 565nm and max forward current of 0.025A. Ideal for applications requiring green light emission, such as indicator lights in electronic devices.
LTL-2785Y
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 16; Nominal Luminous Intensity (mcd): 16.0; Terminal Finish: Pure Tin (Sn); Terminal Pitch: 2.54 mm;
LTL-293SJW
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 90/40; Lens Type: DIFFUSED WHITE; Terminal Finish: Tin/Lead (Sn/Pb);
LTL-2450Y
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 8; Nominal Luminous Intensity (mcd): 8.0; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 2.8 V;
LTL-2885G
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 16; Nominal Luminous Intensity (mcd): 16.0; Terminal Finish: Pure Tin (Sn); Color: GREEN;
LTL-2550G
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 8; Nominal Luminous Intensity (mcd): 8.0; Terminal Finish: Tin/Lead (Sn/Pb); Color: GREEN;
LTL-2620HR
LTL-2620HR by Lite-on Technology is a visible LED array with 8 separate elements, each emitting high efficiency red light at a peak wavelength of 635nm. With a max forward current of 0.025A and forward voltage of 2.8V, it is ideal for applications requiring bright illumination in a compact form factor such as indicator lights or signage displays.
LTL-2755Y
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 8.0; Terminal Finish: Tin/Lead (Sn/Pb); Shape: SQUARE;
LTL-2400Y
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 4.2; Terminal Finish: Tin/Lead (Sn/Pb); Height: 6.15 mm;
LTL-2655HR
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 8; Nominal Luminous Intensity (mcd): 8.0; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -35 Cel;
LTL-2800G
SINGLE COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 8; Nominal Luminous Intensity (mcd): 4.2; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 2;
LTL29S-N2Q1-25-Z
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 62.75; Lens Type: COLORLESS DIFFUSED; Height: .65 mm;
LTL29S-P2R1-25-Z
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 98.0; Lens Type: COLORLESS DIFFUSED; No. of Functions: 1;
LTL-2300HR
LTL-2300HR by Lite-on Technology is a high efficiency red LED with a peak wavelength of 635nm. It has a max forward current of 0.025A and operates at temperatures ranging from -35 to 85°C. This LED is commonly used in applications such as signage, displays, and indicator lights.
LTL-2600HR
LTL-2600HR by Lite-on Technology is a visible LED with 4 separate elements, each emitting high efficiency red light at a peak wavelength of 635nm. With a max forward current of 0.025A and forward voltage of 2.8V, it is ideal for applications requiring bright red illumination in various electronic devices.
LTL-2855G
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 8; Terminal Finish: Tin/Lead (Sn/Pb); Height: 6.15 mm;
LTL-2720Y
SINGLE COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 16; Nominal Luminous Intensity (mcd): 4.2; Terminal Finish: Tin/Lead (Sn/Pb); Color: YELLOW;
LTL29S-N1R2-25
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 420.0; Lens Type: COLORLESS DIFFUSED; Terminal Finish: TIN;
LTL-2500G
Ledtronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 85 Cel; Color: GREEN; Maximum Forward Current: .01 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved