Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTL-2300HR by Lite-on Technology is a high efficiency red LED with a peak wavelength of 635nm. It has a max forward current of 0.025A and operates at temperatures ranging from -35 to 85°C. This LED is commonly used in applications such as signage, displays, and indicator lights.
Median Price
$0.609
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.721
100+ parts
$0.656
1k+ parts
$0.591
10k+ parts
-
DigiKey
$1.210
$0.634
$0.505
$0.431
Future Electronics
$0.410
$0.385
$0.375
Avnet
$0.291
$0.276
Arrow
$0.427
$0.388
Verical
Nova Conductors
$0.386
Freelance Electronics
$0.580
$0.574
R&J Components
NAC Semi
$0.746
Vyrian
Prism Electronics
Netroflash
$0.367
$0.359
Advanced Electronics
Component Stockers USA
$1.100
$0.520
Authorized Procurement Solutions
Perfect Parts
Glotronic Ltd.
Assy Fe
This product's separate configuration with two elements allows for versatile use and improved functionality.
With a compact size of 8.89 mm, this LED product offers flexibility in various applications where space is limited.
Offering a single function, this LED is straightforward to use and ensures simplicity in its application.
The maximum forward current of 0.025 A ensures efficient power usage while maintaining optimal performance.
With a peak wavelength of 635 nm, this LED delivers a vibrant and distinct red color for enhanced visibility.
Being a single color LED, this product provides consistent light output in the desired color, making it suitable for specific applications.
Equipped with four terminals, this LED offers reliable electrical connectivity and increased stability during operation.
With a maximum operating temperature of 85°C, this LED can withstand higher temperature environments, expanding its potential applications.
Its height of 6.15 mm allows for easy integration into various devices or systems, ensuring seamless installation.
The rectangular shape of this LED offers versatility in design and installation options, enabling compatibility with different setups.
With a minimum operating temperature of -35°C, this LED remains operational in colder conditions, enhancing its usability in diverse environments.
The tin/lead terminal finish ensures reliable solderability and durability during assembly, contributing to the product's overall quality.
With a minimum luminous intensity of 0.0032 cd, this LED provides sufficient brightness for various lighting or indicator purposes.
Emitting a vibrant red color, this LED is ideal for applications requiring attention-grabbing or signaling functionalities.
The high-efficiency red color of this LED guarantees superior brightness and performance, ensuring its suitability for demanding applications.
Packaged in bulk, this LED is suitable for manufacturing processes, enabling cost-effective production and easy integration into different products.
With a terminal pitch of 2.54 mm, this LED facilitates convenient PCB mounting, ensuring reliable electrical connections.
Being an array of two LEDs, this product offers redundancy and increased light output, making it favorable for applications requiring higher brightness levels.
With a high nominal luminous intensity of 4.2 mcd, this LED emits a strong and visible light, suitable for various visual purposes.
The radial mounting feature ensures secure and stable positioning, allowing for easy integration into different devices or systems.
Operating with a maximum forward voltage of 2.8 V, this LED provides efficient power consumption and optimal performance.
Visible LEDs LTL-2300HR attributes and parameters. Explore more Visible LEDs devices from Lite-on Technology
Additional Features:
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Minimum Luminous Intensity:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of LEDs in Array:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Sub-Category:
Terminal Finish:
Terminal Pitch:
LTL-2300HR Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Founded in 1975, LITEON embraces being “Best Partner in Opto-Electronic, Eco-Friendly and Intelligent Technologies” as its vision to focus on the development of optoelectronics and key electronic components, and strives to build up competitive edge through resource integration and optimized management. LITEON produces products that are used in a broad range of applications, such as computers, communications, consumer electronics, automotive electronics, LED lighting, cloud computing as well as healthcare. LITEON is a worldwide leading provider of optoelectronics, information technology and storage devices components.
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
1N4148
Onsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
SS14
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
Synsemi
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
Excel (Suzhou) Semiconductor
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
Renesas Electronics
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
KP-2012SURCK
Kingbright Electronic
KP-2012SURCK by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with peak wavelength of 650nm and max forward current of 0.03A. Ideal for applications requiring hyper red light emission, such as indicator lights in electronic devices.
KPT-1608SGC
KPT-1608SGC by Kingbright Electronic is a 1.2mm SINGLE COLOR LED with a peak wavelength of 565nm and max forward current of 0.025A. Ideal for applications requiring SUPER BRIGHT GREEN illumination, such as indicator lights in electronic devices. With a viewing angle of 120° and water clear lens, it offers high luminous intensity at 15.0mcd.
150080SS75000
Wuerth Elektronik & Kg
150080SS75000 by Wurth Elektronik is a single color LED with peak wavelength of 645nm and viewing angle of 140°. Ideal for applications requiring a compact size, it has a forward current of 0.03A and operates b/w -40°C to 85°C. Suitable for surface mount installations in various electronic devices.
HSMZ-C190
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 165.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
L-937EGW
L-937EGW by Kingbright Electronic is a 3mm dual color LED with common bipolar terminal. It has a max forward current of 0.03A and peak wavelengths of 627nm/565nm, suitable for applications requiring high efficiency red/green light emission. With a diffused white lens and radial mount feature, it offers a viewing angle of 60° and nominal luminous intensity of 20.0mcd.
KP-2012EC
KP-2012EC by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with a peak wavelength of 627nm and max forward current of 0.03A. Ideal for applications requiring HIGH EFFICIENCY RED light emission, such as indicator lights in electronic devices due to its compact size and water clear lens type.
LGR971
Mentor & Prazisions Bauteile Kg
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 26.05; Lens Type: COLORLESS DIFFUSED; Terminal Finish: TIN;
597-3311-407NF
Dialight
Dialight's 597-3311-407NF is a single color LED with peak wavelength of 560nm and max forward current of 0.03A. Ideal for surface mount applications, it has water clear lens, 70° viewing angle, and nominal luminous intensity of 12.0mcd.
LTST-C193TGKT-5A
Lite-on Technology
LTST-C193TGKT-5A by Lite-on Technology is a single color LED with peak wavelength of 525nm. It has a max forward current of 0.02A and viewing angle of 130°. Ideal for surface mount applications, it emits green light with luminous intensity of 154.0mcd.
ASMT-YTC7-0AA02
Broadcom
ASMT-YTC7-0AA02 by Broadcom is a 2.3mm TRIPLE COLOR LED with peak wavelengths of 630/522/465nm, offering red/green/blue colors. With a max forward current of 0.025A and viewing angle of 110°, it's ideal for surface mount applications requiring diffused lighting effects. Operating b/w -40 to 100 °C, this LED has a nominal luminous intensity range of 160.0-840.0mcd for versatile lighting solutions.
LTL4233
Taiwan Liton Electronic C
LTL4233 by Taiwan Liton Electronic C is a 5mm SINGLE COLOR LED with peak wavelength of 565nm. With max forward current of 0.03A, it emits green light at 8.7mcd luminous intensity. Ideal for applications requiring diffused lighting in electronic devices due to its radial mount feature and T-1 3/4 package design.
LGL29K-F2J1-24-Z
Osram Opto Semiconductors
Osram Opto Semiconductors' LGL29K-F2J1-24-Z is a 1.3mm SINGLE COLOR LED with peak wavelength of 572nm, emitting GREEN light. With a max forward current of 0.02A and viewing angle of 160°, it's ideal for surface mount applications in various electronic devices.
597-3111-407F
Dialight's 597-3111-407F is a 2mm red LED with max forward current of 0.03A, peak wavelength of 660nm, and viewing angle of 70°. Ideal for surface mount applications in electronics due to its compact size and water-clear lens providing bright illumination.
XHP35B-00-0000-0D0BD430E
Wolfspeed
SINGLE COLOR LED;
HSMF-C116
HSMF-C116 by Broadcom is a 3-element COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 631/520/466 nm. It has a max forward current of 0.01 A and nominal luminous intensities of 80.0/220.0/45.0 mcd, suitable for surface mount applications requiring red/green/blue illumination in compact devices.
MLCAWT-A1-0000-000X51
Cree Led
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Minimum Luminous Intensity: 120 cd; Color At Wavelength: White; Viewing Angle: 120 deg;
1312
Wilbrecht Electronics
HSMH-C170
Hewlett Packard
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 17; Lens Type: DIFFUSED; Maximum Forward Current: .025 A;
SMLP36RGB2W3RD
ROHM
ROHM SMLP36RGB2W3RD is a 1.5mm TRIPLE COLOR LED with SEPARATE configuration. It has a max forward current of 0.01A and operates b/w -40 to 85°C. Ideal for applications requiring RGB illumination in compact spaces like consumer electronics and automotive lighting.
HLMP-1301-E00A1
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 4.95; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTL-2685HR
LTL-2685HR by Lite-on Technology is a high-efficiency red LED with 8 separate elements, peak wavelength of 635nm, and max forward current of 0.025A. Ideal for applications requiring bright red light emission in compact spaces, such as indicator lights or displays.
LTL-2820G
LTL-2820G by Lite-on Technology is a single color LED array with 8 separate elements. It has a peak wavelength of 565nm and max forward current of 0.025A. Ideal for applications requiring green light emission, such as indicator lights in electronic devices.
LTL-2785Y
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 16; Nominal Luminous Intensity (mcd): 16.0; Terminal Finish: Pure Tin (Sn); Terminal Pitch: 2.54 mm;
LTL-293SJW
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 90/40; Lens Type: DIFFUSED WHITE; Terminal Finish: Tin/Lead (Sn/Pb);
LTL-2450Y
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 8; Nominal Luminous Intensity (mcd): 8.0; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 2.8 V;
LTL-2885G
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 16; Nominal Luminous Intensity (mcd): 16.0; Terminal Finish: Pure Tin (Sn); Color: GREEN;
LTL-2550G
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 8; Nominal Luminous Intensity (mcd): 8.0; Terminal Finish: Tin/Lead (Sn/Pb); Color: GREEN;
LTL-2620HR
LTL-2620HR by Lite-on Technology is a visible LED array with 8 separate elements, each emitting high efficiency red light at a peak wavelength of 635nm. With a max forward current of 0.025A and forward voltage of 2.8V, it is ideal for applications requiring bright illumination in a compact form factor such as indicator lights or signage displays.
LTL-2755Y
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 8.0; Terminal Finish: Tin/Lead (Sn/Pb); Shape: SQUARE;
LTL-2400Y
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 4.2; Terminal Finish: Tin/Lead (Sn/Pb); Height: 6.15 mm;
LTL-2500G
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 4.2; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .025 A;
LTL-2655HR
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 8; Nominal Luminous Intensity (mcd): 8.0; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -35 Cel;
LTL-2800G
SINGLE COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 8; Nominal Luminous Intensity (mcd): 4.2; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 2;
LTL29S-N2Q1-25-Z
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 62.75; Lens Type: COLORLESS DIFFUSED; Height: .65 mm;
LTL29S-P2R1-25-Z
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 98.0; Lens Type: COLORLESS DIFFUSED; No. of Functions: 1;
LTL-2600HR
LTL-2600HR by Lite-on Technology is a visible LED with 4 separate elements, each emitting high efficiency red light at a peak wavelength of 635nm. With a max forward current of 0.025A and forward voltage of 2.8V, it is ideal for applications requiring bright red illumination in various electronic devices.
LTL-2855G
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 8; Terminal Finish: Tin/Lead (Sn/Pb); Height: 6.15 mm;
LTL-2720Y
SINGLE COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 16; Nominal Luminous Intensity (mcd): 4.2; Terminal Finish: Tin/Lead (Sn/Pb); Color: YELLOW;
LTL29S-N1R2-25
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 420.0; Lens Type: COLORLESS DIFFUSED; Terminal Finish: TIN;
LTL-2300HR
Ledtronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 9; Terminal Finish: Tin/Lead (Sn/Pb); Additional Features: IC COMPATIBLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved