Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTL-2655HR by Lite-on Technology is a 4-element separate LED with peak wavelength of 635nm. With max forward current of 0.025A and high efficiency red color, it's ideal for applications requiring single color LEDs in a square shape. Featuring nominal luminous intensity of 8.0mcd, this LED operates b/w -35 to 85°C temperatures efficiently.
Median Price
$0.545
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Nova Conductors
1+ parts
$0.526
100+ parts
-
1k+ parts
10k+ parts
R&J Components
Vyrian
Prism Electronics
Bristol Electronics
$0.563
Resion
Elcom Components
Q Components
AZTECH Wire
$13.541
Authorized Procurement Solutions
Glotronic Ltd.
Netroflash
$0.515
$0.500
$0.489
Perfect Parts
Having 4 separate elements allows for more flexibility in design and lighting options.
Compact size makes it easier to integrate into different products and designs.
Efficient use of current while providing sufficient brightness.
Specific wavelength for red color ensures accurate and consistent lighting.
Provides a uniform and consistent color output for applications requiring red lighting.
Wide operating temperature range ensures reliability in various environments.
Ability to operate in low temperatures expands usability options.
Even at low intensity, the red color is clearly visible.
Specifically designed for red color output, ensuring accuracy in lighting.
High efficiency ensures maximum brightness with minimal power consumption.
Radial mounting allows for easy installation and secure placement.
Efficient voltage usage with maximum brightness output.
Visible LEDs LTL-2655HR attributes and parameters. Explore more Visible LEDs devices from Lite-on Technology
Additional Features:
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Minimum Luminous Intensity:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of LEDs in Array:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Sub-Category:
Terminal Finish:
Terminal Pitch:
LTL-2655HR Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Founded in 1975, LITEON embraces being “Best Partner in Opto-Electronic, Eco-Friendly and Intelligent Technologies” as its vision to focus on the development of optoelectronics and key electronic components, and strives to build up competitive edge through resource integration and optimized management. LITEON produces products that are used in a broad range of applications, such as computers, communications, consumer electronics, automotive electronics, LED lighting, cloud computing as well as healthcare. LITEON is a worldwide leading provider of optoelectronics, information technology and storage devices components.
EU2B-YS3203F
Idec
ROTARY SWITCH;
ULN2803A
Texas Instruments
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
2N7002
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
New Jersey Semiconductor Products
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
LM358MX
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
597-7701-207F
Dialight
Dialight's 597-7701-207F is a dual color LED with peak wavelengths of 635nm and 572nm. It has a max forward current of 0.03A, water clear lens, and operates b/w -40°C to 100°C. Ideal for applications requiring super red and green colors, with a viewing angle of 120° and surface mounting feature.
HLMP-1700-B00A2
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.1; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
249-7872-3331-504F
The Dialight 249-7872-3331-504F is a 7.1mm red LED with max forward current of 0.02A and max forward voltage of 28V. Ideal for panel mounting applications, it has a luminous intensity of 55.0mcd and operates b/w -20°C to 71°C temperature range.
LHR974-LP-1-0-20-R18
Osram Opto Semiconductors
Osram Opto Semiconductors' LHR974-LP-1-0-20-R18 is a 1.3mm single color LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for surface mount applications, it offers hyper red light with a viewing angle of 160° and nominal luminous intensity of 41.1mcd.
KP-2012SURCK
Kingbright Electronic
KP-2012SURCK by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with peak wavelength of 650nm and max forward current of 0.03A. Ideal for applications requiring hyper red light emission, such as indicator lights in electronic devices.
KPT-1608CGCK
KPT-1608CGCK by Kingbright Electronic is a 1.2mm GREEN LED with 0.03A forward current and peak wavelength of 574nm. Ideal for surface mount applications, it offers a viewing angle of 120° and luminous intensity of 50.0mcd, suitable for various optoelectronic projects.
1.90.690.269/0000
Rafi & Kg
1.90.690.269/0000 by Rafi & Kg is a 3mm red LED with max current of 0.05A, T-1 code, and radial mount feature. Ideal for indicator lights in electronics due to its single color configuration and round shape.
HDSP-4850
Broadcom
HDSP-4850 by Broadcom is a 10-element single color LED array with peak wavelength of 566nm. It has a max forward current of 0.03A and operates b/w -20 to 85°C. Ideal for applications requiring green light emission in bulk packaging, this rectangular LED array features separate configuration and radial mounting.
553-0133F
Dialight's 553-0133F is a 3mm yellow LED array with 2 separate elements. It has a peak wavelength of 585nm, forward current of 0.02A, and luminous intensity of 6.3mcd. Ideal for applications requiring a single color light source with radial mounting in electronics or signaling devices.
SML-LXR44GC-TR
Lumex
SML-LXR44GC-TR by Lumex is a 2.4mm GREEN LED with max forward current of 0.025A, peak wavelength of 565nm, and viewing angle of 120°. Ideal for surface mount applications in electronics due to its water clear lens and nominal luminous intensity of 30mcd at a max forward voltage of 2.5V.
TLHK5800
Temic Semiconductors
SINGLE COLOR LED; Color: HIGH INTENSITY RED; Minimum Operating Temperature: -20 Cel; T-code: T-1 3/4; Shape: ROUND; Maximum Operating Temperature: 100 Cel;
LTST-C170TBKT-5A
Lite-on Technology
LTST-C170TBKT-5A by Lite-on Technology is a 1.4mm BLUE LED with a peak wavelength of 468nm and viewing angle of 130°. Ideal for surface mount applications, it has a max forward current of 0.02A and nominal luminous intensity of 28.1mcd, making it suitable for various lighting projects.
LGL29K-G2J1-24-Z
Osram Opto Semiconductors' LGL29K-G2J1-24-Z is a 1.3mm single color LED with peak wavelength of 572nm and max forward current of 0.02A. Ideal for applications requiring green light emission, such as indicator lights in electronic devices. Operating temperature range from -40 to 100°C makes it versatile for various environments.
TLMG1100-GS15
Vishay Intertechnology's TLMG1100-GS15 is a 1.6mm GREEN LED with peak wavelength of 572nm, forward current of 0.03A, and forward voltage of 2.4V. Ideal for surface mount applications in electronics due to its compact size, high luminous intensity, and wide viewing angle of 160°.
550-5107F
Dialight's 550-5107F is a 5mm red LED with max. forward current of 0.025A, peak wavelength of 650nm, and viewing angle of 50°. Ideal for indicator lights in electronics due to its diffused lens, T-1 3/4 size, and radial mount feature.
HSMY-C170
Hewlett Packard
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.25; Lens Type: DIFFUSED; No. of Functions: 1;
SML-LXT0805IW-TR
The Lumex SML-LXT0805IW-TR is a 1.4mm SINGLE COLOR LED with peak wavelength of 635nm, emitting RED light at 11.0mcd intensity. Ideal for surface mount applications, it has a max forward current of 0.03A and operates b/w -25°C to 80°C temperature range.
APT1608SECK/J3-PRV
Kingbright Electronic's APT1608SECK/J3-PRV is a 1.2mm SINGLE COLOR LED with peak wavelength of 640nm and luminous intensity of 1100.0mcd. Ideal for applications requiring HYPER RED light, this WATER CLEAR lens LED operates b/w -40 to 85 °C, making it suitable for various surface mount designs.
HLMP1301
Aborn Electronics
Visible LEDs; Lens Type: DIFFUSED; Maximum Forward Voltage: 3 V; Peak Wavelength (nm): 635; Maximum Forward Current: .02 A; Minimum Operating Temperature: -55 Cel;
SMLP36RGB2W3R
ROHM's SMLP36RGB2W3R is a 1.5mm TRIPLE COLOR LED with SEPARATE, 3 ELEMENTS configuration. It has a max forward current of 0.01A and operates b/w -40 to 85°C. Ideal for surface mount applications requiring red, green, and blue light outputs in compact electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTL-2685HR
LTL-2685HR by Lite-on Technology is a high-efficiency red LED with 8 separate elements, peak wavelength of 635nm, and max forward current of 0.025A. Ideal for applications requiring bright red light emission in compact spaces, such as indicator lights or displays.
LTL-2820G
LTL-2820G by Lite-on Technology is a single color LED array with 8 separate elements. It has a peak wavelength of 565nm and max forward current of 0.025A. Ideal for applications requiring green light emission, such as indicator lights in electronic devices.
LTL-2785Y
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 16; Nominal Luminous Intensity (mcd): 16.0; Terminal Finish: Pure Tin (Sn); Terminal Pitch: 2.54 mm;
LTL-293SJW
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 90/40; Lens Type: DIFFUSED WHITE; Terminal Finish: Tin/Lead (Sn/Pb);
LTL-2450Y
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 8; Nominal Luminous Intensity (mcd): 8.0; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 2.8 V;
LTL-2885G
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 16; Nominal Luminous Intensity (mcd): 16.0; Terminal Finish: Pure Tin (Sn); Color: GREEN;
LTL-2550G
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 8; Nominal Luminous Intensity (mcd): 8.0; Terminal Finish: Tin/Lead (Sn/Pb); Color: GREEN;
LTL-2620HR
LTL-2620HR by Lite-on Technology is a visible LED array with 8 separate elements, each emitting high efficiency red light at a peak wavelength of 635nm. With a max forward current of 0.025A and forward voltage of 2.8V, it is ideal for applications requiring bright illumination in a compact form factor such as indicator lights or signage displays.
LTL-2755Y
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 8.0; Terminal Finish: Tin/Lead (Sn/Pb); Shape: SQUARE;
LTL-2400Y
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 4.2; Terminal Finish: Tin/Lead (Sn/Pb); Height: 6.15 mm;
LTL-2500G
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 4.2; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .025 A;
LTL-2800G
SINGLE COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 8; Nominal Luminous Intensity (mcd): 4.2; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 2;
LTL29S-N2Q1-25-Z
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 62.75; Lens Type: COLORLESS DIFFUSED; Height: .65 mm;
LTL29S-P2R1-25-Z
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 98.0; Lens Type: COLORLESS DIFFUSED; No. of Functions: 1;
LTL-2300HR
LTL-2300HR by Lite-on Technology is a high efficiency red LED with a peak wavelength of 635nm. It has a max forward current of 0.025A and operates at temperatures ranging from -35 to 85°C. This LED is commonly used in applications such as signage, displays, and indicator lights.
LTL-2600HR
LTL-2600HR by Lite-on Technology is a visible LED with 4 separate elements, each emitting high efficiency red light at a peak wavelength of 635nm. With a max forward current of 0.025A and forward voltage of 2.8V, it is ideal for applications requiring bright red illumination in various electronic devices.
LTL-2855G
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 8; Terminal Finish: Tin/Lead (Sn/Pb); Height: 6.15 mm;
LTL-2720Y
SINGLE COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 16; Nominal Luminous Intensity (mcd): 4.2; Terminal Finish: Tin/Lead (Sn/Pb); Color: YELLOW;
LTL29S-N1R2-25
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 420.0; Lens Type: COLORLESS DIFFUSED; Terminal Finish: TIN;
LTL-2655HR
Ledtronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 630; Minimum Luminous Intensity: .007 cd; Packing Method: BULK;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved