Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTL-2855G by Lite-on Technology is a 4-element separate LED with peak wavelength of 565nm. With max forward current of 0.025A and forward voltage of 2.8V, it's ideal for applications requiring green light emission in compact spaces. This square-shaped LED operates b/w -35°C to 85°C, making it suitable for various optoelectronic projects.
Median Price
$1.285
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.890
100+ parts
$1.020
1k+ parts
$0.831
10k+ parts
$0.716
Future Electronics
-
$0.680
$0.625
Greenchips
$0.579
$0.551
$0.525
$0.474
Nova Conductors
$0.652
IBS Electronics
$0.891
$0.820
NAC Semi
$0.965
SIE Connect GmbH - GreenChips
R&J Components
Vyrian
Prism Electronics
Rutronik
$0.615
$0.539
Netroflash
$0.619
$0.606
Perfect Parts
GreenTree Electronics
The separate 4-element configuration allows for individual control of each LED, providing versatility in lighting design.
Compact size makes it suitable for various applications where space is limited.
High maximum forward current ensures bright illumination without risk of overheating.
The peak wavelength of 565nm in green color ensures vivid and eye-catching illumination.
Single color LED simplifies design and provides consistent color output.
4 terminals offer secure and stable connections for reliable performance.
High maximum operating temperature allows for use in a wide range of environments.
Low height profile makes it suitable for applications with space constraints.
Square shape provides a uniform and symmetrical light output.
Low minimum operating temperature ensures usability even in colder environments.
Tin/lead terminal finish offers good solderability and reliability.
Even at low luminous intensity, this LED still provides visible light output.
Green color provides a bright and vibrant lighting option.
Consistent green color output ensures uniformity in lighting design.
Bulk packing method is convenient for mass production and cost-effective.
Standard terminal pitch for easy integration into various circuit designs.
4 LEDs in array provide increased brightness and coverage.
Nominal luminous intensity of 8mcd ensures sufficient brightness for various applications.
Radial mount feature allows for easy installation and secure mounting.
High maximum forward voltage ensures efficient power consumption and long-lasting performance.
Visible LEDs LTL-2855G attributes and parameters. Explore more Visible LEDs devices from Lite-on Technology
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Minimum Luminous Intensity:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of LEDs in Array:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Sub-Category:
Terminal Finish:
Terminal Pitch:
LTL-2855G Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Founded in 1975, LITEON embraces being “Best Partner in Opto-Electronic, Eco-Friendly and Intelligent Technologies” as its vision to focus on the development of optoelectronics and key electronic components, and strives to build up competitive edge through resource integration and optimized management. LITEON produces products that are used in a broad range of applications, such as computers, communications, consumer electronics, automotive electronics, LED lighting, cloud computing as well as healthcare. LITEON is a worldwide leading provider of optoelectronics, information technology and storage devices components.
1N4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
BAV99
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
Diotec Electronics
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Philips Semiconductors
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
Panjit International
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
HLMP-1503-D0000
Hewlett Packard
SINGLE COLOR LED; Size: 3 mm; Maximum Forward Current: .03 A; Shape: ROUND; T-code: T-1; No. of Functions: 1;
MLCAWT-H1-0000-0000E3
Wolfspeed
Wolfspeed's MLCAWT-H1-0000-0000E3 is a single color LED with max forward current of 0.35A and height of 1.2mm. It operates at up to 150°C, emitting white light at 120cd intensity. Ideal for applications requiring high brightness in compact spaces.
XHP35B-00-0000-0D0BD40E5
Cree Led
SINGLE COLOR LED;
SML-LX23SUGC-TR
Lumex
SML-LX23SUGC-TR by Lumex is a 2mm single color LED with peak wavelength of 574nm. It has a max forward current of 0.025A and viewing angle of 90°. Ideal for surface mount applications in electronics, displays, and indicators due to its super ultra green color and clear lens type.
XHP35B-00-0000-0D0BD430E
3000
Nte Electronics
SINGLE COLOR LED; Mounting Feature: AXIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1.4; Lens Type: CLEAR; Viewing Angle: 80 deg;
HSMW-C265
Broadcom
HSMW-C265 by Broadcom is a 1.2mm SINGLE COLOR LED with a max forward current of 0.02A and viewing angle of 150°. Ideal for surface mount applications, it operates b/w -40 to 85 °C, emitting white light at a luminous intensity of 180.0 mcd.
TLMS1100-GS08
Vishay Intertechnology
TLMS1100-GS08 by Vishay Intertechnology is a 1.6mm SINGLE COLOR LED with peak wavelength of 645nm, ideal for applications requiring RED light emission. It has a max forward current of 0.03A and viewing angle of 160°, suitable for surface mount configurations in various electronic devices.
OVM12F3Y7
Tt Electronics Plc
SML-D12M8WT86CN
ROHM
Visible LEDs; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; JESD-609 Code: e4;
XHP35B-00-0000-0D0BE20E3
HSMH-C170
HSMH-C170 by Broadcom is a single color LED with a peak wavelength of 660nm and a max forward current of 0.025A. It is commonly used in applications such as surface mount visible LED displays and indicators.
Q12P1CXXW12E
Apem Components
The Apem Components Q12P1CXXW12E is a 12mm single color LED with diffused lens, emitting white light at 1200.0mcd intensity. Ideal for panel mounting applications, it has a wide 60° viewing angle and operates b/w -40°C to 85°C temperature range.
150141RV73100
Wuerth Elektronik & Kg
150141RV73100 by Wurth Elektronik is a dual-color LED with separate 2 elements, peak wavelengths of 630nm and 572nm, and a viewing angle of 120°. Ideal for surface mount applications in electronics, this LED has a compact size of 2.4mm and water-clear lens type. Operating temperatures range from -40°C to 85°C.
HLMP-3301
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 7.0; Lens Type: TINTED DIFFUSED; Terminal Finish: MATTE TIN;
SML-D12U8WT86S
ROHM's SML-D12U8WT86S is a 1.2mm SINGLE COLOR LED with MILKY WHITE lens, emitting RED light at 63.0mcd intensity. It has a max forward current of 0.02A and operates b/w -40 to 85°C, suitable for surface mount applications in various electronic devices.
KPT-1608EC
Kingbright Electronic
KPT-1608EC by Kingbright Electronic is a 1.2mm SINGLE COLOR LED with peak wavelength of 627nm and 15.0mcd luminous intensity. Ideal for high efficiency red lighting applications, it operates b/w -40 to 85°C temperatures and has a water clear lens for a viewing angle of 120°.
APT2012CGCK
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 40.0; Lens Type: WATER CLEAR; Maximum Operating Temperature: 85 Cel;
597-7701-207F
Dialight
Dialight's 597-7701-207F is a dual color LED with peak wavelengths of 635nm and 572nm. It has a max forward current of 0.03A, water clear lens, and operates b/w -40°C to 100°C. Ideal for applications requiring super red and green colors, with a viewing angle of 120° and surface mounting feature.
SML-D12M8WT86N
ROHM's SML-D12M8WT86N is a 1.2mm SINGLE COLOR LED with 0.02A max forward current, emitting YELLOWISH GREEN light at 25.0mcd luminous intensity. Ideal for surface mount applications in electronics due to its compact size and milky white lens design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTL-2685HR
Lite-on Technology
LTL-2685HR by Lite-on Technology is a high-efficiency red LED with 8 separate elements, peak wavelength of 635nm, and max forward current of 0.025A. Ideal for applications requiring bright red light emission in compact spaces, such as indicator lights or displays.
LTL-2820G
LTL-2820G by Lite-on Technology is a single color LED array with 8 separate elements. It has a peak wavelength of 565nm and max forward current of 0.025A. Ideal for applications requiring green light emission, such as indicator lights in electronic devices.
LTL-2785Y
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 16; Nominal Luminous Intensity (mcd): 16.0; Terminal Finish: Pure Tin (Sn); Terminal Pitch: 2.54 mm;
LTL-293SJW
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 90/40; Lens Type: DIFFUSED WHITE; Terminal Finish: Tin/Lead (Sn/Pb);
LTL-2450Y
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 8; Nominal Luminous Intensity (mcd): 8.0; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 2.8 V;
LTL-2885G
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 16; Nominal Luminous Intensity (mcd): 16.0; Terminal Finish: Pure Tin (Sn); Color: GREEN;
LTL-2550G
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 8; Nominal Luminous Intensity (mcd): 8.0; Terminal Finish: Tin/Lead (Sn/Pb); Color: GREEN;
LTL-2620HR
LTL-2620HR by Lite-on Technology is a visible LED array with 8 separate elements, each emitting high efficiency red light at a peak wavelength of 635nm. With a max forward current of 0.025A and forward voltage of 2.8V, it is ideal for applications requiring bright illumination in a compact form factor such as indicator lights or signage displays.
LTL-2755Y
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 8.0; Terminal Finish: Tin/Lead (Sn/Pb); Shape: SQUARE;
LTL-2400Y
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 4.2; Terminal Finish: Tin/Lead (Sn/Pb); Height: 6.15 mm;
LTL-2500G
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 4.2; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .025 A;
LTL-2655HR
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 8; Nominal Luminous Intensity (mcd): 8.0; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -35 Cel;
LTL-2800G
SINGLE COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 8; Nominal Luminous Intensity (mcd): 4.2; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 2;
LTL29S-N2Q1-25-Z
Osram Opto Semiconductors
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 62.75; Lens Type: COLORLESS DIFFUSED; Height: .65 mm;
LTL29S-P2R1-25-Z
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 98.0; Lens Type: COLORLESS DIFFUSED; No. of Functions: 1;
LTL-2300HR
LTL-2300HR by Lite-on Technology is a high efficiency red LED with a peak wavelength of 635nm. It has a max forward current of 0.025A and operates at temperatures ranging from -35 to 85°C. This LED is commonly used in applications such as signage, displays, and indicator lights.
LTL-2600HR
LTL-2600HR by Lite-on Technology is a visible LED with 4 separate elements, each emitting high efficiency red light at a peak wavelength of 635nm. With a max forward current of 0.025A and forward voltage of 2.8V, it is ideal for applications requiring bright red illumination in various electronic devices.
LTL-2720Y
SINGLE COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 16; Nominal Luminous Intensity (mcd): 4.2; Terminal Finish: Tin/Lead (Sn/Pb); Color: YELLOW;
LTL29S-N1R2-25
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 420.0; Lens Type: COLORLESS DIFFUSED; Terminal Finish: TIN;
LTL-2855G
Ledtronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 8; Nominal Luminous Intensity (mcd): 17; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: SEPARATE, 4 ELEMENTS;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved