Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTL-293SJW by Lite-on Technology is a 5mm dual color LED with red/green colors, peak wavelengths of 660nm/565nm, and a max forward current of 0.04A. Commonly used in applications requiring diffused white light, this LED has a viewing angle of 60° and nominal luminous intensity of 90/40 mcd. Ideal for radial mounting setups with a terminal pitch of 2.54mm and T-1 3/4 T-code designation.
Median Price
$0.183
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.450
100+ parts
-
1k+ parts
$0.166
10k+ parts
$0.136
Mouser Electronics
$0.147
$0.129
$0.081
Chip1Stop
$0.150
Verical
$0.153
$0.115
Newark
Arrow
$0.171
Nova Conductors
$0.186
TME
$0.406
$0.170
$0.128
$0.097
Chip Stock
Vyrian
IBS Electronics
$0.834
$0.086
NAC Semi
$1.190
$1.080
ComSIT Distribution GmbH
ComSIT USA
Bristol Electronics
Atlantic Semiconductor
Netsource Technology, Inc.
Semtec, LLC
Mil-Aero Solutions, Inc.
Mentor Electronics Marketing, LLC
Prism Electronics
J & M Industries LLC
Sensible Micro Corp
Semicontronic
$0.125
$0.124
Advanced Electronics
$0.185
$0.168
$0.152
Continental Prestige Electronics
$0.181
Argo Parts USA
$0.180
Component Stockers USA
$0.190
$0.070
$0.060
Corohmni
$0.195
Aztec Data Supply Inc.
$0.530
Kepictronics
Glotronic Ltd.
Netroflash
$0.182
$0.176
$0.173
This configuration allows for easy installation and connection in circuit designs.
Compact size makes it suitable for various applications where space is limited.
Efficient power usage and lower operating costs.
Provides a dual color output with distinct peak wavelengths for versatility.
Diffused lens design provides uniform light dispersion for better visibility.
Offers the ability to emit two different colors, increasing design possibilities.
Simplified wiring and installation process.
Can withstand higher temperatures, making it suitable for various environments.
Low profile design for easy integration into different devices.
Classic round shape for ease of mounting and compatibility.
Capable of functioning in low-temperature environments without issues.
Standard terminal finish for easy soldering and reliable connections.
Dual color options for visual customization and attention-grabbing displays.
Bold red and green colors for high visibility and contrast.
Bulk packaging for cost-effective purchasing and storage.
Standard terminal pitch for compatibility with various circuit board designs.
Wide viewing angle for better visibility from different perspectives.
High luminous intensity for bright and visible light output.
Radial mounting for secure placement and efficient light distribution.
Operates efficiently with a low forward voltage requirement.
Visible LEDs LTL-293SJW attributes and parameters. Explore more Visible LEDs devices from Lite-on Technology
Additional Features:
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Sub-Category:
T-code:
Terminal Finish:
Terminal Pitch:
Viewing Angle:
LTL-293SJW Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Design/Specification - LTL-293SJW 24/Aug/2022
Founded in 1975, LITEON embraces being “Best Partner in Opto-Electronic, Eco-Friendly and Intelligent Technologies” as its vision to focus on the development of optoelectronics and key electronic components, and strives to build up competitive edge through resource integration and optimized management. LITEON produces products that are used in a broad range of applications, such as computers, communications, consumer electronics, automotive electronics, LED lighting, cloud computing as well as healthcare. LITEON is a worldwide leading provider of optoelectronics, information technology and storage devices components.
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
Diodes Incorporated
SMBJ18CA
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
1N4148WS
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
BAV99
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
Uniohm
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
EU2B-YS2J03F
Idec
ROTARY SWITCH;
Sensitron Semiconductor
Semitron
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
APHHS1005CGCK
Kingbright Electronic
APHHS1005CGCK by Kingbright Electronic is a 0.8mm green LED with a max forward current of 0.03A and peak wavelength of 574nm. It is commonly used in surface mount applications for its water clear lens and 120° viewing angle.
KP-2012EC
KP-2012EC by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with a peak wavelength of 627nm and max forward current of 0.03A. Ideal for applications requiring HIGH EFFICIENCY RED light emission, such as indicator lights in electronic devices due to its compact size and water clear lens type.
SML-D12M8WT86N
ROHM
ROHM's SML-D12M8WT86N is a 1.2mm SINGLE COLOR LED with 0.02A max forward current, emitting YELLOWISH GREEN light at 25.0mcd luminous intensity. Ideal for surface mount applications in electronics due to its compact size and milky white lens design.
CMD17-21VGD/TR8
Visual Communications Company
CMD17-21VGD/TR8 by Visual Communications Company is a 1.4mm SINGLE COLOR LED with peak wavelength of 570nm and green color. It has a max forward current of 0.03A, viewing angle of 140°, and surface mounting feature. Ideal for applications requiring low luminous intensity in compact spaces.
LGR971-Z
Osram Opto Semiconductors
The Osram Opto Semiconductors LGR971-Z is a single color LED with peak wavelength of 572nm, forward current of 0.025A, and max forward voltage of 2.5V. Ideal for applications requiring green light emission in compact spaces due to its small size (1.4mm) and surface mounting feature.
HLMP-1700
Agilent Technologies
Agilent Technologies' HLMP-1700 is a 3mm single color LED with a peak wavelength of 635nm and a max forward current of 0.007A. It is commonly used for high efficiency red lighting applications.
597-5111-407F
Dialight
Dialight's 597-5111-407F is a single color LED with peak wavelength of 660nm, forward current of 0.025A, and forward voltage of 2.3V. Ideal for surface mount applications, it emits red light with diffused white lens in a rectangular shape.
155124M173200
Wuerth Elektronik & Kg
TRIPLE COLOR LED;
LGL29K-F2J1-24-Z
Osram Opto Semiconductors' LGL29K-F2J1-24-Z is a 1.3mm SINGLE COLOR LED with peak wavelength of 572nm, emitting GREEN light. With a max forward current of 0.02A and viewing angle of 160°, it's ideal for surface mount applications in various electronic devices.
597-7721-207F
Dialight's 597-7721-207F is a dual-color LED with peak wavelengths of 586/565nm. It has a max forward current of 0.03A and a viewing angle of 120°, making it ideal for surface mount applications requiring yellow/green light emission. The LED's water-clear lens and compact size of 2.3876mm make it suitable for various optoelectronic designs.
HLMP-1503-C0002
Broadcom
HLMP-1503-C0002 by Broadcom is a 3mm SINGLE COLOR LED with peak wavelength of 565nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring high performance green light emission in compact spaces.
APG1608CGKC/T
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 60.0; Lens Type: WATER CLEAR; Shape: RECTANGULAR;
LHR974-LP-1-0-20-R18
Osram Opto Semiconductors' LHR974-LP-1-0-20-R18 is a 1.3mm single color LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for surface mount applications, it offers hyper red light with a viewing angle of 160° and nominal luminous intensity of 41.1mcd.
550-0507F
Dialight's 550-0507F is a 5mm red LED with built-in resistor, operating at -40 to 85°C. It has a peak wavelength of 655nm, forward current of 0.0075A, and forward voltage of 5V. Ideal for applications requiring a single color LED with diffused lens in radial mount configuration.
551-3007F
Dialight's 551-3007F is a 3mm DUAL COLOR LED with COMMON BIPOLAR TERMINAL. It has a max forward current of 0.03A, peak wavelengths of 635nm/565nm, and nominal luminous intensity of 4.7/10.0 mcd. Ideal for applications requiring red/green indicator lights with a viewing angle of 60° and radial mounting feature.
150120GS75000
150120GS75000 by Wurth Elektronik is a 2mm SINGLE COLOR LED with peak wavelength of 515nm. It has a max forward current of 0.03A and viewing angle of 140°. Ideal for applications requiring GREEN light emission, such as indicator lights in electronic devices.
HLMP4700
Vch
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Maximum Forward Voltage: 2.2 V; Maximum Forward Current: .007 A;
TLCR5800
Telefunken Microelectronics
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 100 Cel; Color At Wavelength: Orange;
3018
Nte Electronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1.6; Shape: ROUND; Maximum Forward Current: .1 A;
MLCAWT-H1-0000-000XE3
Wolfspeed
Wolfspeed's MLCAWT-H1-0000-000XE3 is a single color LED with max forward current of 0.35A and height of 1.2mm. Ideal for applications requiring white light at 120cd luminous intensity, it operates up to 150°C, with max forward voltage of 3.4V and reverse voltage of 5V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTL29S-N2Q1-25-Z
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 62.75; Lens Type: COLORLESS DIFFUSED; Height: .65 mm;
LTL29S-P2R1-25-Z
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 98.0; Lens Type: COLORLESS DIFFUSED; No. of Functions: 1;
LTL-2450Y
Lite-on Technology
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 8; Nominal Luminous Intensity (mcd): 8.0; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 2.8 V;
Ledtronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); No. of LEDs in Array: 4; Packing Method: BULK; Configuration: SEPARATE, 4 ELEMENTS;
LTL29S-N1R2-25
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 420.0; Lens Type: COLORLESS DIFFUSED; Terminal Finish: TIN;
LTL29S-N2Q1-25
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 250.0; Lens Type: COLORLESS DIFFUSED; Terminal Finish: TIN;
LTL29S-P2R1-25
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 400.0; Lens Type: COLORLESS DIFFUSED; Terminal Finish: TIN;
LTL-293SJ-001
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 90/40; Lens Type: DIFFUSED WHITE; No. of Functions: 1;
LTL-293SJ-002
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 90/40; Lens Type: DIFFUSED WHITE; Minimum Operating Temperature: -55 Cel;
LTL-293SJ-011
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 90/40; Lens Type: DIFFUSED WHITE; T-code: T-1 3/4;
LTL-293SJ-012
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 90/40; Lens Type: DIFFUSED WHITE; Terminal Pitch: 2.54 mm;
LTL-293SJ-022
LTL-293SJ-031
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 90/40; Lens Type: DIFFUSED WHITE; Maximum Operating Temperature: 100 Cel;
LTL-293SJ-041
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 90/40; Lens Type: DIFFUSED WHITE; Additional Features: IC COMPATIBLE;
LTL-293SJ-051
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 90/40; Lens Type: DIFFUSED WHITE; Shape: ROUND;
LTL-293SJ
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 90/40; Lens Type: DIFFUSED WHITE; Terminal Finish: Tin/Lead (Sn/Pb);
LTL-293SJWP-L
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 90.0/40.0; Lens Type: DIFFUSED WHITE; Packing Method: TAPE;
LTL-293SJWP
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 90.0/40.0; Lens Type: DIFFUSED WHITE; Packing Method: BULK;
LTL-293SJWS2DA
LTL-293SJWS
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 90.0/40.0; Lens Type: DIFFUSED WHITE; Terminal Pitch: 2.54 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved