Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: WATER CLEAR; Height: .75 mm;
Median Price
$0.056
Lifecycle Status
Suppliers In-Stock
41
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.082
100+ parts
$0.078
1k+ parts
10k+ parts
-
Mouser Electronics
$0.190
$0.090
$0.065
$0.049
Relay Specialties
$0.250
$0.080
$0.070
DigiKey
$0.054
TTI
Arrow
$0.044
Verical
$0.057
Sager
$0.051
Future Electronics
Chip1Stop
$0.100
Freelance Electronics
$0.027
Nova Conductors
$0.076
Maritex
$0.133
Component Electronics Inc.
$0.140
$0.130
Bristol Electronics
Chip Stock
Vyrian
Dan-Mar Components
Prism Electronics
Cyclops Electronics Ltd
ACDS - Activité Composants Distribution Service
NAC Semi
$0.077
ComSIT Distribution GmbH
Speed Components Ltd
Semtec, LLC
ComSIT USA
Connector Distribution Corp
Right Parts Inc.
Classic Components Corporation
Goldney Electronics S.L.
Sensible Micro Corp
LWI Electronics Inc
Electronics Depot
PC Components Company LLC
Resion
SPM Sales
MISTER SPROCKETS
Sunrise Surplus Inc.
J2 Sourcing AB
Martec Srl
Semi Source
Semicontronic
$0.035
$0.034
Aztec Data Supply Inc.
$0.038
Argo Parts USA
$0.074
Continental Prestige Electronics
Bastille Electronics
$0.072
$0.069
$0.068
Corohmni
Advanced Electronics
Perfect Parts
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Glotronic Ltd.
Futuretech Components
Authorized Procurement Solutions
Cyclops Electronics Ltd (Excess)
S.R.D Solutions
Speed Components Ltd (Excess)
Visible LEDs APT2012SGC attributes and parameters. Explore more Visible LEDs devices from Kingbright
Color:
Configuration:
Maximum Forward Current:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Terminal Pitch:
Viewing Angle:
APT2012SGC Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Packaging - Label Change 01/Oct/2016 Mult Devices 18/Oct/2017
An Innovative LED Solution Provider Kingbright is a Taiwanese LED solution provider built on over 40 years of expertise, innovation and collaboration. We are deeply ingrained in the pursuit of excellence, manufacturing the most comprehensive, reliable and highest quality LEDs in both visible and invisible spectrums to meet various engineering needs in all industries for customers around the globe. Our commitments to technological innovation and quality excellence ensure continuous improvement to products and customer satisfaction with the superior support of our sales offices and warehouses in the US, Europe and across Asia.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
1N4148
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
261
Deltrol Controls
Other Relays;
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
2N2222A
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Semiconductor Technology
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
SPC TECHNOLOGY/ MULTICOMP
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
HSMF-C165
Broadcom
HSMF-C165 by Broadcom is a 1.6mm dual-color LED with peak wavelengths of 630nm/570nm, ideal for applications requiring high efficiency red/green illumination. With a max forward current of 0.02A and viewing angle of 120°, it's suitable for surface mount configurations in various electronic devices operating b/w -30°C to 85°C.
LTST-C190TBKT-10A
Lite-on Technology
SINGLE COLOR LED;
KP-2012QBC-D
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Peak Wavelength (nm): 468;
KPHHS-1005SURCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 150.0; Lens Type: WATER CLEAR; Terminal Finish: Gold (Au);
LTST-C190KDKT-10A
LTST-C190KDKT-10A by Lite-on Technology is a 1.1mm SINGLE COLOR LED with peak wavelength of 650nm and ultra bright red color. It has a max forward current of 0.02A, viewing angle of 130°, and surface mounting feature. Ideal for applications requiring compact, high-intensity lighting solutions in electronics and automotive industries.
HSMF-C118
Agilent Technologies
TRIPLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 90.0/120.0/40.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
550-5107F
Dialight
Dialight's 550-5107F is a 5mm red LED with max. forward current of 0.025A, peak wavelength of 650nm, and viewing angle of 50°. Ideal for indicator lights in electronics due to its diffused lens, T-1 3/4 size, and radial mount feature.
HLMP-1790-A0002
Broadcom's HLMP-1790-A0002 is a 3mm single color LED with peak wavelength of 565nm. With max forward current of 0.007A, it emits green light at 2.3mcd luminous intensity. Ideal for applications requiring radial mounting and a viewing angle of 50°.
SML-D12U8WT86Q
ROHM SML-D12U8WT86Q is a 1.2mm SINGLE COLOR LED with 0.02A max forward current, emitting RED light at 63.0mcd luminous intensity. Ideal for surface mount applications in electronics due to its small size and milky white lens for uniform light dispersion.
HSMH-C190
HSMH-C190 by Broadcom is a 1mm single color LED with peak wavelength of 660nm. It has a max forward current of 0.025A and viewing angle of 170°. Ideal for surface mount applications, it offers red light with luminous intensity of 17.0mcd, making it suitable for various lighting and display purposes.
HSMG-C190
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
LTST-S270KRKT
LTST-S270KRKT by Lite-on Technology is a 1.2mm WATER CLEAR LED with peak wavelength of 639nm and max forward current of 0.03A. Ideal for applications requiring a red light source, such as indicator lights in electronic devices due to its high luminous intensity of 130cd at 2.4V forward voltage.
KPT-2012SURCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 150.0; Lens Type: WATER CLEAR; Viewing Angle: 120 deg;
555-3303F
Dialight's 555-3303F LED is a 2mm single color green LED with built-in resistor. It has a peak wavelength of 565nm, forward current of 0.0067A, and forward voltage of 2.4V. Ideal for applications requiring diffused light such as indicator lights in electronic devices.
553-0212F
Dialight's 553-0212F is a dual color LED array with separate, 2-element configuration. It has peak wavelengths of 650nm for green and 563nm for red, ideal for status indicators in electronics. With a max forward current of 0.007A and operating temperatures from -55°C to 100°C, it offers reliable performance in various applications.
MSL0104RGBU12Y
ROHM's MSL0104RGBU12Y is a 5.4mm TRIPLE COLOR LED with separate configuration and built-in ZENER DIODE. It has max forward current of 0.04A, operates b/w -40 to 85°C, and offers red/green/blue colors. Ideal for surface mount applications requiring nominal luminous intensity of 700/1200/400 mcd.
150141RS73100
Wuerth Elektronik & Kg
150141RS73100 by Wurth Elektronik is a single color LED with peak wavelength of 630nm and max forward current of 0.03A. With a viewing angle of 120°, it's ideal for applications requiring red light emission in compact spaces. This surface mount LED operates b/w -40 to 85°C, making it suitable for various lighting projects.
CLV1A-FKB-CK1VW1DE1BB7C3C3
Cree Led
TRIPLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 635.0/1430.0/285.0; Configuration: COMMON ANODE, 3 ELEMENTS; Maximum Operating Temperature: 85 Cel;
APT1608SRCPRV
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Terminal Pitch: 1.65 mm;
XHP35B-00-0000-0D0BE20E3
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
APT2012SGC
Kingbright Electronic
APT2012SGC by Kingbright Electronic is a 1.3mm SUPER BRIGHT GREEN LED with 0.025A forward current, emitting at 565nm peak wavelength. Ideal for surface mount applications, it offers a wide 120° viewing angle and operates b/w -40°C to 85°C temperatures.
APT2012SRCPRV
APT2012SRCPRV by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER BRIGHT RED illumination, such as indicator lights in electronic devices due to its water clear lens and surface mounting feature.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Peak Wavelength (nm): 660;
APT2012CGCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 40.0; Lens Type: WATER CLEAR; Maximum Operating Temperature: 85 Cel;
APT2012CGCK by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with peak wavelength of 574nm, suitable for applications requiring GREEN light emission. With a max forward current of 0.03A and viewing angle of 120°, it's ideal for surface mount installations in various electronic devices. Operating temperatures range from -40 to 85 °C, making it versatile for different environments.
APT2012SECK/J3-PRV
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1100.0; Lens Type: WATER CLEAR; Maximum Forward Current: .03 A;
APT2012SURCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 150.0; Lens Type: WATER CLEAR; Shape: RECTANGULAR;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 150.0; Lens Type: WATER CLEAR; Packing Method: TR;
APT2012SYCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 120.0; Lens Type: WATER CLEAR; Maximum Forward Voltage: 2.5 V;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 50.0; Lens Type: WATER CLEAR; Viewing Angle: 120 deg;
APT2012SYCK/J3-PRV
APT2012SYCK/J3-PRV by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with peak wavelength of 590nm and viewing angle of 140°. Ideal for applications requiring SUPER BRIGHT YELLOW illumination, it operates b/w -40 to 85 °C and has a max forward current of 0.03A.
APT2012SECK
APT2012SECK by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with WATER CLEAR lens emitting SUPER BRIGHT ORANGE light at 610nm wavelength. It has a max forward current of 0.03A and operates b/w -40°C to 85°C, making it suitable for surface mount applications requiring high luminous intensity up to 160.0mcd.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 160.0; Lens Type: WATER CLEAR; Size: 1.3 mm;
APT2012LSECK/J3-PRV
APT2012LSECK/J3-PRV by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with peak wavelength of 640nm and max forward current of 0.03A. Ideal for applications requiring HYPER RED light emission, such as indicator lights in electronic devices due to its WATER CLEAR lens and surface mounting feature.
APT2012ZGC
Kingbright Electronic's APT2012ZGC is a 1.3mm SINGLE COLOR LED with peak wavelength of 515nm and 450.0mcd luminous intensity. Ideal for surface mount applications, it operates b/w -40 to 85°C, making it suitable for various visible LED lighting projects.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 300.0; Lens Type: WATER CLEAR; Shape: RECTANGULAR;
APT2012SECK/J4-PRV
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2000.0; Lens Type: WATER CLEAR; Viewing Angle: 140 deg;
APT2012ZGCK
APT2012LZGCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Configuration: SINGLE;
APT2012QWF/F
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 400.0; Lens Type: FLUORESCENT YELLOW; Color At Wavelength: White;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved