Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 150.0; Lens Type: WATER CLEAR; Shape: RECTANGULAR;
Median Price
$0.083
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
100+ parts
$0.079
1k+ parts
10k+ parts
-
DigiKey
$0.200
$0.095
$0.069
Mouser Electronics
$0.070
$0.052
TTI
$0.047
Chip1Stop
$0.068
$0.058
Arrow
$0.048
Verical
Nova Conductors
$0.081
Vyrian
IBS Electronics
$0.065
NAC Semi
$0.098
Chip Stock
Connector Distribution Corp
Right Parts Inc.
Classic Components Corporation
ComSIT Distribution GmbH
Bristol Electronics
PC Components Company LLC
LWI Electronics Inc
Ashlea Components Ltd
SPM Sales
Prism Electronics
Semicontronic
$0.035
$0.034
Continental Prestige Electronics
$0.076
$0.074
Argo Parts USA
Corohmni
Advanced Electronics
Aztec Data Supply Inc.
$0.710
Perfect Parts
QUARKTWIN TECHNOLOGY LTD
SIE Connect GmbH (Excess)
Glotronic Ltd.
Formix International (Excess)
Robosynatics
$0.653
$0.605
Lucentia Tech
Visible LEDs APT2012SURCK attributes and parameters. Explore more Visible LEDs devices from Kingbright
Color:
Configuration:
Maximum Forward Current:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Terminal Pitch:
Viewing Angle:
APT2012SURCK Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Packaging - Label Change 01/Oct/2016 Mult Devices 18/Oct/2017
An Innovative LED Solution Provider Kingbright is a Taiwanese LED solution provider built on over 40 years of expertise, innovation and collaboration. We are deeply ingrained in the pursuit of excellence, manufacturing the most comprehensive, reliable and highest quality LEDs in both visible and invisible spectrums to meet various engineering needs in all industries for customers around the globe. Our commitments to technological innovation and quality excellence ensure continuous improvement to products and customer satisfaction with the superior support of our sales offices and warehouses in the US, Europe and across Asia.
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
OPA2277UA/2K5E4
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
ULN2803ADWRG4
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
Synsemi
Formosa Microsemi
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
Infineon Technologies
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
OVS-0808
SPC TECHNOLOGY/ MULTICOMP
OVS-0808 LED by Spc Technology/ Multicomp is a 1.4mm WATER CLEAR single color LED with 0.03A forward current, emitting SUPER BRIGHT RED light at 130° viewing angle. Ideal for surface mount applications, it operates b/w -30 to 80 °C and has a luminous intensity of 300.0 mcd.
HLMP4700
Vch
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Maximum Forward Voltage: 2.2 V; Maximum Forward Current: .007 A;
HSMA-C265
Broadcom
HSMA-C265 by Broadcom is a 1.2mm SINGLE COLOR LED with peak wavelength of 595nm, ideal for applications requiring AMBER light. With max forward current of 0.025A and viewing angle of 150°, it's suitable for surface mount installations in various electronic devices. Operating temp range: -30 to 85 °C.
MLCAWT-H1-0000-000XE3
Cree Led
SINGLE COLOR LED; Maximum Forward Voltage: 3.4 V; Maximum Reverse Voltage: 5 V; Maximum Operating Temperature: 150 Cel; Maximum Forward Current: .35 A; Color At Wavelength: White;
SMLE12BC7TT86
ROHM
ROHM's SMLE12BC7TT86 is a 1.2mm SINGLE COLOR LED with peak wavelength of 468nm, forward current of 0.02A, and luminous intensity of 22.0mcd. Ideal for applications requiring blue light emission in compact electronic devices due to its small size and surface mounting feature.
LRTBGVTG-U5V5-1+A5B5-29+S9T9-49
Osram Opto Semiconductors
Osram Opto Semiconductors' LRTBGVTG-U5V5-1+A5B5-29+S9T9-49 is a 2.5mm TRIPLE COLOR LED with peak wavelengths of 632/523/465nm, suitable for visible applications. It has a max forward current of 40A, diffused lens type, and nominal luminous intensities of 875.0/2200.0/440.0mcd for RED/TRUE GREEN/BLUE colors, making it ideal for surface mount configurations with a viewing angle of 120° at temperatures ranging from -40 to 110 °C.
LST676-Q1R2-1-Z
Osram Opto Semiconductors' LST676-Q1R2-1-Z is a 2.4mm single color LED with peak wavelength of 645nm and max forward current of 0.03A. Ideal for applications requiring super red light emission, such as indicator lights in automotive or electronic devices.
553-0212F
Dialight
Dialight's 553-0212F is a dual color LED array with separate, 2-element configuration. It has peak wavelengths of 650nm for green and 563nm for red, ideal for status indicators in electronics. With a max forward current of 0.007A and operating temperatures from -55°C to 100°C, it offers reliable performance in various applications.
XHP50B-00-0000-0D0BJ40E3
Wolfspeed
SINGLE COLOR LED;
3009
Nte Electronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5; Terminal Pitch: 1.39 mm; Configuration: SINGLE;
KP-1608SURC
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 200.0; Lens Type: WATER CLEAR; Minimum Operating Temperature: -40 Cel;
HLMP1301
Three-five Systems
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .02 A; Minimum Operating Temperature: -55 Cel; Height: 4 mm;
XHP35B-00-0000-0D0BD457E
597-3301-502F
Dialight's 597-3301-502F is a single color LED with peak wavelength of 570nm and forward voltage of 2.8V. Ideal for surface mount applications, it has a viewing angle of 110° and luminous intensity of 25.0mcd, making it suitable for indicator lights in various electronic devices.
569-0117-700F
The Dialight 569-0117-700F is a 3mm amber LED array with separate, 2-element configuration. It has a max forward current of 0.025A and peak wavelength of 600nm. This LED is commonly used in applications such as signage, indicator lights, and automotive lighting.
SSL-LX3044AD
Lumex
SSL-LX3044AD by Lumex is a 3mm single color LED with built-in resistor. It has a peak wavelength of 605nm and viewing angle of 60°. Ideal for applications requiring amber light emission, such as indicator lights in electronic devices.
LST67F-T2V2-1-1-20-R18-Z
Osram Opto Semiconductors' LST67F-T2V2-1-1-20-R18-Z is a 2.4mm single color LED with peak wavelength of 645nm and max forward current of 0.05A. Ideal for applications requiring super red light emission, such as indicator lights in automotive or electronic devices.
HLMP-3507
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.2; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
XHP35B-00-0000-0D0HC20E8
LTST-C170KRKT
Lite-on Technology
LTST-C170KRKT by Lite-on Technology is a 1.4mm single color LED with peak wavelength of 639nm and max forward current of 0.03A. Ideal for applications requiring a red light source, such as indicator lights in electronic devices due to its water clear lens and surface mounting feature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
APT2012SGC
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: WATER CLEAR; Height: .75 mm;
Kingbright Electronic
APT2012SGC by Kingbright Electronic is a 1.3mm SUPER BRIGHT GREEN LED with 0.025A forward current, emitting at 565nm peak wavelength. Ideal for surface mount applications, it offers a wide 120° viewing angle and operates b/w -40°C to 85°C temperatures.
APT2012SRCPRV
APT2012SRCPRV by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER BRIGHT RED illumination, such as indicator lights in electronic devices due to its water clear lens and surface mounting feature.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Peak Wavelength (nm): 660;
APT2012CGCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 40.0; Lens Type: WATER CLEAR; Maximum Operating Temperature: 85 Cel;
APT2012CGCK by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with peak wavelength of 574nm, suitable for applications requiring GREEN light emission. With a max forward current of 0.03A and viewing angle of 120°, it's ideal for surface mount installations in various electronic devices. Operating temperatures range from -40 to 85 °C, making it versatile for different environments.
APT2012SECK/J3-PRV
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1100.0; Lens Type: WATER CLEAR; Maximum Forward Current: .03 A;
APT2012SURCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 150.0; Lens Type: WATER CLEAR; Packing Method: TR;
APT2012SYCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 120.0; Lens Type: WATER CLEAR; Maximum Forward Voltage: 2.5 V;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 50.0; Lens Type: WATER CLEAR; Viewing Angle: 120 deg;
APT2012SYCK/J3-PRV
APT2012SYCK/J3-PRV by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with peak wavelength of 590nm and viewing angle of 140°. Ideal for applications requiring SUPER BRIGHT YELLOW illumination, it operates b/w -40 to 85 °C and has a max forward current of 0.03A.
APT2012SECK
APT2012SECK by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with WATER CLEAR lens emitting SUPER BRIGHT ORANGE light at 610nm wavelength. It has a max forward current of 0.03A and operates b/w -40°C to 85°C, making it suitable for surface mount applications requiring high luminous intensity up to 160.0mcd.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 160.0; Lens Type: WATER CLEAR; Size: 1.3 mm;
APT2012LSECK/J3-PRV
APT2012LSECK/J3-PRV by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with peak wavelength of 640nm and max forward current of 0.03A. Ideal for applications requiring HYPER RED light emission, such as indicator lights in electronic devices due to its WATER CLEAR lens and surface mounting feature.
APT2012ZGC
Kingbright Electronic's APT2012ZGC is a 1.3mm SINGLE COLOR LED with peak wavelength of 515nm and 450.0mcd luminous intensity. Ideal for surface mount applications, it operates b/w -40 to 85°C, making it suitable for various visible LED lighting projects.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 300.0; Lens Type: WATER CLEAR; Shape: RECTANGULAR;
APT2012SECK/J4-PRV
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2000.0; Lens Type: WATER CLEAR; Viewing Angle: 140 deg;
APT2012ZGCK
APT2012LZGCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Configuration: SINGLE;
APT2012SURC
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 180.0; Lens Type: WATER CLEAR; Height: .75 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved