Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
APT2012LZGCK by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with peak wavelength of 515nm and viewing angle of 140°. Ideal for applications requiring GREEN light, it operates b/w -40 to 85 °C and has a max forward current of 0.025A. Suitable for surface mount installations in various electronic devices.
Median Price
$0.333
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.460
100+ parts
$0.256
1k+ parts
$0.196
10k+ parts
$0.148
DigiKey
$0.520
-
TTI
Verical
$0.206
Arrow
Chip1Stop
Nova Conductors
$0.184
Vyrian
Chip Stock
Bristol Electronics
VNN
Speed Components Ltd
Cyclops Electronics Ltd
Prism Electronics
Semicontronic
$0.123
$0.120
$0.119
Aranea Global
$0.181
$0.173
Corohmni
$0.191
Aztec Data Supply Inc.
$0.680
iodParts Technologies Inc.
Argo Parts USA
Continental Prestige Electronics
Perfect Parts
Single configuration makes it easy to use and install, perfect for applications where only one color is needed.
Compact size allows for easy integration into small devices or tight spaces.
Low forward current consumption helps in reducing power usage and efficiency.
Optimal peak wavelength for green color, providing bright and vibrant lighting.
Water clear lens ensures maximum light transmission and brightness, enhancing visibility.
Specifically designed for single color applications, ensuring consistent and uniform lighting.
2 terminals for easy connection and installation, making it user-friendly.
High maximum operating temperature makes it suitable for various environments and applications.
Low height profile for slim and sleek designs, ideal for space-constrained applications.
Rectangular shape provides directional lighting, focusing the beam in a specific direction.
Wide range of operating temperatures allows for use in extreme conditions without performance issues.
Green color LED offers bright and energy-efficient lighting, suitable for a variety of applications.
TR packing for convenient handling and storage, ensuring product protection during transportation.
Optimal terminal pitch for easy soldering and connection, enhancing installation efficiency.
Wide viewing angle for broad coverage and visibility, making it suitable for various lighting applications.
High luminous intensity for bright and luminous lighting effects, enhancing visibility.
Surface mount feature for easy and secure installation on PCBs, suitable for automated assembly processes.
Visible LEDs APT2012LZGCK attributes and parameters. Explore more Visible LEDs devices from Kingbright Electronic
Color:
Configuration:
Maximum Forward Current:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Terminal Pitch:
Viewing Angle:
APT2012LZGCK Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Packaging - Label Change 01/Oct/2016 Mult Devices 18/Oct/2017
The Kingbright group was founded in 1980 as one of Taiwan’s LED pioneers. Over the last 40 years, we have grown from a small local business to a multi-national enterprise spanning Europe, America, and Asia. Our products are found in computers, consumer electronics, automotive, lighting, and many other applications. The Kingbright brand is trusted by customers world-wide as a world-class manufacturer of LEDs, one of the top-three LED packagers in Taiwan. The group has over 2,000 employees and more than 38,000 sq. meters of automated production facilities. Kingbright people are highly educated (16% with advanced degrees) and experienced (97% of managers with more than 5 years of service). Over the last 40 years of experience in LED design and manufacturing, with support from our loyal customers and suppliers, form the foundation of our competitive strength. Kingbright has five manufacturing plants with a monthly production rate of 800-million LEDs per month. Kingbright maintains the highest quality standards, recognized with ISO 9001 quality, TS 16949 automotive, and ISO 14001 environmental certifications. Our products also carry UL and VDE certifications. The factory is recognized with the BS OHSAS 18001 certificate for employee health and safety, as well as green certifications from Sony and Samsung. The production flow is managed by an advanced Oracle ERP system. Six Sigma management principles guide continuous improvement to the production efficiency and quality.
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
1N4148
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
MBRA160T3G
Onsemi
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Lite-on Semiconductor
CRCW04020000Z0EDHP
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
Nte Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
VLMU3500-385-060
SINGLE COLOR LED;
HLMP-4700
Everlight Electronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.0; Lens Type: TINTED DIFFUSED; Maximum Operating Temperature: 100 Cel;
SLR-56YY3F
ROHM
ROHM's SLR-56YY3F is a 5mm SINGLE COLOR LED with peak wavelength of 585nm. With max forward current of 0.02A, it offers yellow light at 10.0mcd luminous intensity. Ideal for applications requiring diffused yellow light emission in a compact form factor.
586-2406-205F
Dialight
Dialight's 586-2406-205F is a single color LED with a tinted lens, 10.7mm size, and T-3 1/4 code. Operating from -30 to 85°C, it emits white light at 412.0mcd intensity. Ideal for panel mounting applications due to its round shape and bulk packaging.
HLMP-1301-E00A1
Broadcom
HLMP-1301-E00A1 by Broadcom is a 3mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring high efficiency red light emission in bulk packaging.
5201
Wilbrecht Electronics
DUAL COLOR LED;
SSL-LXA3025IGC-TR
Lumex
SSL-LXA3025IGC-TR by Lumex is a 2.8mm DUAL COLOR LED with 1 function, peak wavelengths of 635/565nm, and clear lens. Ideal for surface mount applications, it has a max forward current of 0.03A and operates b/w -40 to 85°C. With red/green colors and a viewing angle of 130°, it offers luminous intensity of 12.0/20.0mcd for versatile lighting solutions.
LGL29K-F2J1-24-Z
Osram Opto Semiconductors
Osram Opto Semiconductors' LGL29K-F2J1-24-Z is a 1.3mm SINGLE COLOR LED with peak wavelength of 572nm, emitting GREEN light. With a max forward current of 0.02A and viewing angle of 160°, it's ideal for surface mount applications in various electronic devices.
LGR971-Z
The Osram Opto Semiconductors LGR971-Z is a single color LED with peak wavelength of 572nm, forward current of 0.025A, and max forward voltage of 2.5V. Ideal for applications requiring green light emission in compact spaces due to its small size (1.4mm) and surface mounting feature.
VLMW1500-GS08
Vishay Intertechnology's VLMW1500-GS08 is a single color LED with max forward current of 0.02A and max forward voltage of 3.05V. With a viewing angle of 130°, it's ideal for surface mount applications requiring white light at wavelengths, offering high luminous intensity at 90mcd.
HLMP-4000
Hewlett Packard
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 5/8; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
155124VS73200
Wuerth Elektronik & Kg
Wurth Elektronik's 155124VS73200 is a 2mm SINGLE COLOR LED with peak wavelength of 575nm and water clear lens. Ideal for applications requiring bright green light, it has a viewing angle of 120° and operates b/w -40 to 85 °C. Perfect for surface mount installations, it offers a nominal luminous intensity of 50.0 mcd at 0.025A forward current.
SML-D12M8WT86C
ROHM's SML-D12M8WT86C is a 1.2mm SINGLE COLOR LED with max forward current of 0.02A and max forward voltage of 2.2V. Ideal for surface mount applications, it emits yellowish green light with luminous intensity of 25.0mcd, suitable for TR packing in electronics industry.
SML-P11MTT86RH
ROHM SML-P11MTT86RH is a 0.6mm SINGLE COLOR LED with max. forward current of 0.02A and max. forward voltage of 1.9V. Ideal for surface mount applications, it emits YELLOWISH GREEN light with min. luminous intensity of 0.0016cd, suitable for TR packing method in optoelectronics at -40 to 85°C operating temp range.
VLMU3100-GS08
Vishay Intertechnology's VLMU3100-GS08 is a single color LED with max forward current of 0.03A and max forward voltage of 3.8V. With a viewing angle of 120°, it operates b/w -40 to 80 °C, making it ideal for various visible LED applications.
KP-1608CGCK
Kingbright Electronic
Kingbright Electronic's KP-1608CGCK is a 1.2mm SINGLE COLOR LED with peak wavelength of 574nm, max forward current of 0.03A, and water clear lens. Ideal for applications requiring green light emission in compact spaces due to its small size and surface mounting feature.
LWP4SG-V2AB-JKPL-1
Osram Opto Semiconductors' LWP4SG-V2AB-JKPL-1 is a 1.6mm single color LED with diffused lens, emitting white light at 1350.0mcd intensity. It has a max forward current of 0.02A and operates b/w -40 to 100°C, making it ideal for surface mount applications requiring high luminous output in a compact size.
BR1111C-TR
Stanley Electric
Stanley Electric's BR1111C-TR is a 1.2mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.025A. Ideal for surface mount applications, it offers a viewing angle of 141° and nominal luminous intensity of 11.7mcd, making it suitable for various visible LED lighting projects.
LTST-C150CKT
Lite-on Technology
LTST-C150CKT by Lite-on Technology is a single color LED with peak wavelength of 660nm. It has a max forward current of 0.04A and a viewing angle of 130°. Ideal for surface mount applications, this red LED operates b/w -55 to 85 °C temperatures.
HLMP3962
Three-five Systems
HLMP3962 by Three-five Systems is a visible LED with peak wavelength of 565nm, max forward current of 0.03A, and diffused lens type. Ideal for applications requiring green light emission with a viewing angle of 75°. Operates b/w -20°C to 100°C, making it versatile for various lighting needs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
APT2012SGC
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: WATER CLEAR; Height: .75 mm;
APT2012SGC by Kingbright Electronic is a 1.3mm SUPER BRIGHT GREEN LED with 0.025A forward current, emitting at 565nm peak wavelength. Ideal for surface mount applications, it offers a wide 120° viewing angle and operates b/w -40°C to 85°C temperatures.
APT2012SRCPRV
APT2012SRCPRV by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER BRIGHT RED illumination, such as indicator lights in electronic devices due to its water clear lens and surface mounting feature.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Peak Wavelength (nm): 660;
APT2012CGCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 40.0; Lens Type: WATER CLEAR; Maximum Operating Temperature: 85 Cel;
APT2012CGCK by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with peak wavelength of 574nm, suitable for applications requiring GREEN light emission. With a max forward current of 0.03A and viewing angle of 120°, it's ideal for surface mount installations in various electronic devices. Operating temperatures range from -40 to 85 °C, making it versatile for different environments.
APT2012SECK/J3-PRV
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1100.0; Lens Type: WATER CLEAR; Maximum Forward Current: .03 A;
APT2012SURCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 150.0; Lens Type: WATER CLEAR; Shape: RECTANGULAR;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 150.0; Lens Type: WATER CLEAR; Packing Method: TR;
APT2012SYCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 120.0; Lens Type: WATER CLEAR; Maximum Forward Voltage: 2.5 V;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 50.0; Lens Type: WATER CLEAR; Viewing Angle: 120 deg;
APT2012SYCK/J3-PRV
APT2012SYCK/J3-PRV by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with peak wavelength of 590nm and viewing angle of 140°. Ideal for applications requiring SUPER BRIGHT YELLOW illumination, it operates b/w -40 to 85 °C and has a max forward current of 0.03A.
APT2012SECK
APT2012SECK by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with WATER CLEAR lens emitting SUPER BRIGHT ORANGE light at 610nm wavelength. It has a max forward current of 0.03A and operates b/w -40°C to 85°C, making it suitable for surface mount applications requiring high luminous intensity up to 160.0mcd.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 160.0; Lens Type: WATER CLEAR; Size: 1.3 mm;
APT2012LSECK/J3-PRV
APT2012LSECK/J3-PRV by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with peak wavelength of 640nm and max forward current of 0.03A. Ideal for applications requiring HYPER RED light emission, such as indicator lights in electronic devices due to its WATER CLEAR lens and surface mounting feature.
APT2012ZGC
Kingbright Electronic's APT2012ZGC is a 1.3mm SINGLE COLOR LED with peak wavelength of 515nm and 450.0mcd luminous intensity. Ideal for surface mount applications, it operates b/w -40 to 85°C, making it suitable for various visible LED lighting projects.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 300.0; Lens Type: WATER CLEAR; Shape: RECTANGULAR;
APT2012SECK/J4-PRV
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2000.0; Lens Type: WATER CLEAR; Viewing Angle: 140 deg;
APT2012ZGCK
APT2012LSECK/J4-PRV
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved