Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Kingbright Electronic's APT1608SURCK-AMT is a 1.2mm SINGLE COLOR LED with 0.03A forward current, emitting HYPER RED light at 650nm wavelength. Ideal for surface mount applications, it offers a viewing angle of 120° and luminous intensity of 260.0mcd, operating b/w -40°C to 100°C temperatures.
Median Price
$0.165
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.150
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$0.180
$0.154
$0.096
DigiKey Marketplace
VNN
Vyrian
Nova Conductors
Advanced Electronics
$0.059
$0.056
Semicontronic
$0.128
$0.125
$0.124
Aztec Data Supply Inc.
$0.498
Corohmni
$0.652
Continental Prestige Electronics
Argo Parts USA
Bastille Electronics
Allows for easy integration into existing circuits without the need for complex wiring.
Compact size is ideal for applications where space is limited.
Low power consumption helps to save energy and reduce operating costs.
Provides a bright and focused output in the hyper red color spectrum.
Offers a clear and unobstructed view of the LED light for optimal visibility.
Ensures consistent and uniform lighting output for a professional look.
Simplifies installation and reduces the risk of wiring errors.
Designed to withstand high temperatures, ensuring long-term reliability.
Low profile design makes it suitable for applications with limited space.
Allows for easy alignment and placement during installation.
Can operate in cold environments without compromising performance.
Vibrant color adds a visually appealing touch to any project.
Convenient packaging for easy handling and storage.
Standard pitch size for compatibility with a wide range of mounting options.
Wide viewing angle ensures maximum visibility from different perspectives.
Brightness level is suitable for a variety of lighting applications.
Allows for easy and secure mounting on PCBs or other surfaces.
Visible LEDs APT1608SURCK-AMT attributes and parameters. Explore more Visible LEDs devices from Kingbright Electronic
Color:
Configuration:
Maximum Forward Current:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Terminal Pitch:
Viewing Angle:
APT1608SURCK-AMT Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
The Kingbright group was founded in 1980 as one of Taiwan’s LED pioneers. Over the last 40 years, we have grown from a small local business to a multi-national enterprise spanning Europe, America, and Asia. Our products are found in computers, consumer electronics, automotive, lighting, and many other applications. The Kingbright brand is trusted by customers world-wide as a world-class manufacturer of LEDs, one of the top-three LED packagers in Taiwan. The group has over 2,000 employees and more than 38,000 sq. meters of automated production facilities. Kingbright people are highly educated (16% with advanced degrees) and experienced (97% of managers with more than 5 years of service). Over the last 40 years of experience in LED design and manufacturing, with support from our loyal customers and suppliers, form the foundation of our competitive strength. Kingbright has five manufacturing plants with a monthly production rate of 800-million LEDs per month. Kingbright maintains the highest quality standards, recognized with ISO 9001 quality, TS 16949 automotive, and ISO 14001 environmental certifications. Our products also carry UL and VDE certifications. The factory is recognized with the BS OHSAS 18001 certificate for employee health and safety, as well as green certifications from Sony and Samsung. The production flow is managed by an advanced Oracle ERP system. Six Sigma management principles guide continuous improvement to the production efficiency and quality.
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Surge Components
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
1N4148
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Telcom Semiconductor
LGR971-KN-1-0-20-R18
Osram Opto Semiconductors
Osram Opto Semiconductors' LGR971-KN-1-0-20-R18 is a 1.3mm SINGLE COLOR LED with peak wavelength of 572nm, emitting GREEN light at 26.05mcd luminous intensity. Ideal for surface mount applications with a wide 160° viewing angle and operating temperature range from -30 to 85 °C.
CMD17-21VGC/TR8
Chicago Miniature Lighting
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: CLEAR; Peak Wavelength (nm): 570;
597-3001-207F
Dialight
Dialight's 597-3001-207F is a single color LED with peak wavelength of 630nm, forward current of 0.03A, and forward voltage of 2.8V. Ideal for applications requiring red light emission, such as indicator lights in electronic devices due to its water clear lens and surface mounting feature.
HSMF-C162
Broadcom
HSMF-C162 by Broadcom is a 1.6mm dual-color LED with peak wavelengths of 637nm and 595nm. With a viewing angle of 120°, it's ideal for surface mount applications requiring amber/orange-red light output. Operating temperatures range from -30 to 85 °C, making it suitable for various electronic devices.
MLCAWT-H1-0000-0000E1
Wolfspeed
Wolfspeed's MLCAWT-H1-0000-0000E1 is a single color LED with max forward current of 0.35A and height of 1.2mm. It operates at up to 150°C, emits white light at 3.4V, ideal for applications requiring high luminous intensity like automotive lighting.
555-2003F
Dialight's 555-2003F is a 2mm single color LED with built-in resistor. It operates at -40 to 85°C, with peak wavelength of 650nm and forward current of 0.008A. Ideal for bulk applications requiring red light emission and radial mounting, offering a viewing angle of 90° and luminous intensity of 2.2mcd.
SML-P11MTT86
ROHM
ROHM SML-P11MTT86 is a 0.6mm SINGLE COLOR LED with max. forward current of 0.02A, emitting YELLOW GREEN light at 2.1mcd intensity. Ideal for surface mount applications in electronics due to its small size and color clarity.
HLMP-1790-101F
The Dialight HLMP-1790-101F is a 3mm GREEN LED with peak wavelength of 565nm. It has a max forward current of 0.007A and viewing angle of 50deg. Ideal for applications requiring single color LEDs in radial mount configuration.
LTST-C150KYKT
Lite-on Technology
LTST-C150KYKT by Lite-on Technology is a single color LED with peak wavelength of 595nm. It has a max forward current of 0.03A and viewing angle of 130°. Ideal for applications requiring amber yellow light emission in compact spaces, such as indicator lights or display panels.
HLMP-1503
Everlight Electronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.0; Lens Type: TINTED DIFFUSED; Maximum Reverse Voltage: 5 V;
SML-D12M8WT86M
ROHM SML-D12M8WT86M is a 1.2mm SINGLE COLOR LED with milky white lens emitting YELLOWISH GREEN light at 25.0mcd intensity. It has a max forward current of 0.02A and operates b/w -40 to 85°C, suitable for surface mount applications in various electronic devices.
150060YS75000
Wuerth Elektronik & Kg
150060YS75000 by Wurth Elektronik is a WATER CLEAR YELLOW LED with a peak wavelength of 595nm and viewing angle of 140°. It has a size of 1.1mm, operates b/w -40 to 85 °C, and is ideal for surface mount applications requiring a single color light source.
KP-2012SGC
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: WATER CLEAR; Height: .75 mm;
LGQ396-PS-35
Osram Opto Semiconductors LGQ396-PS-35 is a 1mm single color LED with max. forward current of 0.03A and green color at wavelength. Ideal for surface mount applications, it has a viewing angle of 120° and operates b/w -30 to 85 °C, making it suitable for various lighting solutions.
3000
Nte Electronics
SINGLE COLOR LED; Mounting Feature: AXIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1.4; Lens Type: CLEAR; Viewing Angle: 80 deg;
CMD6722SRUGCTR8
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 40.0/25.0; Lens Type: CLEAR; Configuration: SEPARATE, 2 ELEMENTS;
APHD1608LCGCK
Kingbright Electronic
APHD1608LCGCK by Kingbright Electronic is a 0.7mm green LED with a peak wavelength of 574nm and a max forward current of 0.03A. It is suitable for surface mount applications and has a viewing angle of 100°.
HLMP1790
Vch
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green; Viewing Angle: 50 deg; Minimum Operating Temperature: -55 Cel;
APT2012SRCPRV
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Peak Wavelength (nm): 660;
5310F5
Industrial Devices
Visible LEDs; Lens Type: DIFFUSED; Color At Wavelength: Green; Height: 11 mm; Viewing Angle: 90 deg; Maximum Forward Current: .03 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
APT1608SGC
APT1608SGC by Kingbright Electronic is a 1.2mm SINGLE COLOR LED with a peak wavelength of 565nm and max forward current of 0.025A. Ideal for applications requiring SUPER BRIGHT GREEN illumination, such as indicator lights in electronic devices due to its water clear lens and surface mounting feature.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: WATER CLEAR; Viewing Angle: 120 deg;
APT1608SURCK
Kingbright Electronic's APT1608SURCK is a 1.2mm SINGLE COLOR LED with peak wavelength of 650nm and max forward current of 0.03A. Ideal for applications requiring HYPER RED light, such as indicator lights in electronic devices due to its WATER CLEAR lens and surface mounting feature.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 150.0; Lens Type: WATER CLEAR; Maximum Forward Current: .03 A;
APT1608CGCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 40.0; Lens Type: WATER CLEAR; Viewing Angle: 120 deg;
APT1608CGCK by Kingbright Electronic is a 1.2mm GREEN LED with 0.03A forward current, peak wavelength of 574nm, and 120cd luminous intensity. Ideal for surface mount applications in products requiring green-yellow light emission with a viewing angle of 120°.
APT1608SRCPRV
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Terminal Pitch: 1.65 mm;
Kingbright Electronic's APT1608SRCPRV is a 1.2mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER BRIGHT RED illumination, such as indicator lights in electronic devices due to its water clear lens and surface mounting feature.
APT1608LZGCK
Kingbright Electronic's APT1608LZGCK is a 1.2mm SINGLE COLOR LED with peak wavelength of 515nm and 50.0mcd luminous intensity. Ideal for surface mount applications, it operates b/w -40 to 85°C, making it suitable for various visible LED lighting projects.
APT1608EC
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.0; Lens Type: WATER CLEAR; Color: HIGH EFFICIENCY RED;
Kingbright Electronic's APT1608EC is a 1.2mm SINGLE COLOR LED with 0.03A forward current and peak wavelength of 627nm. Ideal for high efficiency red lighting applications, it has a water clear lens, 120° viewing angle, and operates b/w -40°C to 85°C.
APT1608ZGCK
Kingbright Electronic's APT1608ZGCK is a 1.2mm SINGLE COLOR LED with peak wavelength of 515nm, max forward current of 0.025A, and luminous intensity of 350mcd. Ideal for surface mount applications in electronics, offering water clear lens and green light emission with wide 120° viewing angle.
APT1608SECK/J3-PRV
Kingbright Electronic's APT1608SECK/J3-PRV is a 1.2mm SINGLE COLOR LED with peak wavelength of 640nm and luminous intensity of 1100.0mcd. Ideal for applications requiring HYPER RED light, this WATER CLEAR lens LED operates b/w -40 to 85 °C, making it suitable for various surface mount designs.
APT1608QBC/D
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Shape: RECTANGULAR;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Terminal Finish: Gold (Au);
APT1608SECK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 160.0; Lens Type: WATER CLEAR; Terminal Pitch: 1.65 mm;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 160.0; Lens Type: WATER CLEAR; Packing Method: TR;
APT1608SECK-AMT
SINGLE COLOR LED;
APT1608QBC/D-AMT
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 120.0; Lens Type: WATER CLEAR; Minimum Operating Temperature: -40 Cel;
APT1608SURC
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 180.0; Lens Type: WATER CLEAR; Peak Wavelength (nm): 640;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved