Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Height: 8.6 mm; Minimum Operating Temperature: -55 Cel; Color At Wavelength: Red;
Median Price
$0.280
Lifecycle Status
Suppliers In-Stock
61
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.269
100+ parts
$0.245
1k+ parts
$0.221
10k+ parts
-
DigiKey
$0.330
$0.120
$0.096
Mouser Electronics
$0.580
$0.291
$0.224
$0.184
Newark
$0.608
$0.319
$0.252
$0.212
Element14
$0.217
EBV Elektronik
Farnell
$0.220
$0.170
Future Electronics
$0.041
$0.039
Freelance Electronics
$0.049
Nova Conductors
$0.201
Digiode
$0.256
TME
$0.370
$0.206
$0.176
$0.161
Component Electronics Inc.
$0.380
$0.290
$0.250
ECAB
Vyrian
Chip Stock
NAC Semi
$0.069
ICP Electronique
EPE Components Inc.
Flex Direct, LLC
IBS Electronics
$0.058
$0.054
Rebound Electronics
Electronic Expediters
R&J Components
Astute Electronics Inc
ComSIT Distribution GmbH
EMSNET
LIBRA Elektronik GmbH
Elcom Components
Zilex Electronics Inc.
Euro-Tech
ComSIT USA
Legend Electronics Inc.
PC Components Company LLC
Bristol Electronics
Odintec Ltd.
Amalfi Trading
Whistler Technology
Fibra_Brandt Electronic GMBH
Atlantic Semiconductor
NexGen Digital
Resion
A&K Electronics
Martec Srl
A2Z Electronics, Inc.
Sinequanon
Mil-Aero Solutions, Inc.
Beltway Electronics Company
Pegasus Components GmbH
LWI Electronics Inc
Component Sense
Digital Electronic Gebert Verwaltungs UG
Electronics Depot
ACDS - Activité Composants Distribution Service
Prism Electronics
Holdelec - ElecDif-Pro
Semi Source
Sunrise Surplus Inc.
LittleDiode
Manotoh
Semtec, LLC
Semicontronic
$0.035
$0.034
Decca Corp
Argo Parts USA
$0.195
Netroflash
$0.190
$0.186
Bastille Electronics
$0.191
$0.181
$0.179
Corphita
$0.242
Aztec Data Supply Inc.
$0.254
Corohmni
$0.546
Continental Prestige Electronics
$0.558
$0.215
$0.149
$0.134
Component Stockers USA
$0.570
$0.150
Metaverse IC Inc.
Allen Electronics Distributors
$0.143
Infinite Electronics LLP (Excess)
QUARKTWIN TECHNOLOGY LTD
Speed Components Ltd (Excess)
Perfect Parts
Assy Fe
Authorized Procurement Solutions
Eliminating Global Boundries, Inc
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
Supply Digital
SIE Connect GmbH (Excess)
A-Plus Industry Inc.
Visible LEDs HLMP4700 attributes and parameters. Explore more Visible LEDs devices from Three-five Systems
Color At Wavelength:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Lens Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height:
Peak Wavelength (nm):
Sub-Category:
Terminal Finish:
Viewing Angle:
HLMP4700 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
NSN
5980-01-180-3913, 5980011803913
NIIN
011803913
1N4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
International Semiconductor
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
Diotec Semiconductor Ag
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
First Components International
MURS160T3G
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
2N7002
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
Panjit International
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
Daco Semiconductor
Silicon Standard
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
2N2222A
Micropac Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
158563460
Wuerth Elektronik & Kg
SINGLE COLOR LED;
SML-P11UTT86R
ROHM
ROHM SML-P11UTT86R is a 0.6mm SINGLE COLOR LED with 0.02A forward current, emitting RED light at 2.5mcd luminous intensity. Ideal for surface mount applications in electronics due to its small size and color clarity.
HLMP-1719
Everlight Electronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.0; Lens Type: TINTED DIFFUSED; Additional Features: HIGH RELIABILITY;
HLMP-1700
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.0; Lens Type: TINTED DIFFUSED; Packing Method: BULK;
NFSW757GT-V3
Nichia
NFSW757GT-V3 by Nichia is a 2.6mm SQUARE WHITE LED with 0.18A max forward current and built-in ESD protection. Ideal for surface mount applications, operating b/w -40 to 100°C, it offers high reliability in various visible lighting projects.
VLMU3100-GS08
Vishay Intertechnology
Vishay Intertechnology's VLMU3100-GS08 is a single color LED with max forward current of 0.03A and max forward voltage of 3.8V. With a viewing angle of 120°, it operates b/w -40 to 80 °C, making it ideal for various visible LED applications.
HSME-C191
Broadcom
HSME-C191 by Broadcom is a 1mm green LED with a peak wavelength of 570nm. It has a max forward current of 0.02A and a viewing angle of 170°. This surface mount LED is commonly used in visible light applications requiring high luminous intensity.
MSL0104RGBU1
ROHM's MSL0104RGBU1 is a 5.4mm TRIPLE COLOR LED with separate configuration and built-in ZENER DIODE. It has a max forward current of 0.04A, MILKY WHITE lens, and operates b/w -40 to 85°C. Ideal for applications requiring RGB color mixing in compact designs like signage, displays, and decorative lighting.
557-1502-203F
Dialight
Dialight's 557-1502-203F is a 17.8mm single color LED with max forward current of 0.08A, ideal for panel mount applications. Operating temp range from -25°C to 85°C makes it suitable for various industries requiring red light indicators in bulk packaging.
HSMS-C150
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: DIFFUSED; Configuration: SINGLE;
3036
Wilbrecht Electronics
HLMP-1700-B00A2
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.1; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SML-P11MTT86R
ROHM SML-P11MTT86R is a surface mount single color LED with max forward current of 0.02A, clear lens, and green-yellow color at wavelength. It operates b/w -40°C to 85°C, ideal for applications requiring compact and efficient lighting solutions.
598-8010-107F
Dialight's 598-8010-107F is a single color LED with water clear lens, ideal for surface mount applications. Featuring a size of 1.1mm and max forward current of 0.025A, it emits red light at a wavelength with luminous intensity of 60.0mcd. Perfect for compact electronic devices requiring efficient and bright illumination.
KP-1608SURC
Kingbright Electronic
KP-1608SURC by Kingbright Electronic is a 1.2mm SINGLE COLOR LED with peak wavelength of 640nm and 120° viewing angle. Ideal for applications requiring HYPER RED light emission, such as indicator lights in electronic devices. With a max forward current of 0.03A, it operates b/w -40°C to 85°C temperature range efficiently.
3153
Nte Electronics
The Nte Electronics 3153 is a single color LED array with 5 separate elements, each with a peak wavelength of 700nm. With a max forward current of 0.025A and nominal luminous intensity of 0.4mcd, it is ideal for applications requiring red light emission in a compact 4.99mm size package.
551-1307F
Dialight's 551-1307F is a 3mm single color LED with peak wavelength of 565nm, forward current of 0.007A, and forward voltage of 3V. Ideal for applications requiring green light emission, such as indicator lights in electronic devices.
551-1107-004F
Dialight's 551-1107-004F is a 3mm red LED array with 4 separate elements. It has a peak wavelength of 635nm, forward current of 0.007A, and operates b/w -55 to 100°C. Ideal for applications requiring high luminous intensity in a compact design.
HLMP1790
Vch
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green; Viewing Angle: 50 deg; Minimum Operating Temperature: -55 Cel;
HLMP-3507-D0002
HLMP-3507-D0002 by Broadcom is a 5mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring high performance green light emission in radial mounting configurations.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HLMP-3507
HLMP-3507 by Broadcom is a 5mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring high performance green light emission in bulk packaging, with radial mounting feature.
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.2; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
Hewlett Packard
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green; Height: 8.8 mm; No. of Functions: 1;
HLMP3507
Three-five Systems
HLMP3507 by Three-five Systems is a green LED with peak wavelength of 565nm and max forward current of 0.03A. With diffused lens, it has a viewing angle of 75° and operates b/w -55 to 100°C. Ideal for applications requiring low power consumption and precise color emission in various environments.
HLMP-1790-A00A2
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.3; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
Broadcom's HLMP-1790-A00A2 is a 3mm single color LED with peak wavelength of 565nm. With max forward current of 0.007A, it emits green light at 2.3mcd luminous intensity. Ideal for applications requiring a radial mount visible LED with a viewing angle of 50°.
HLMP-1790
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); T-code: T-1; Maximum Forward Voltage: 2.2 V; Viewing Angle: 50 deg;
Cml Technologies & Kg
HLMP1790 by Cml Technologies & Kg is a 3mm SINGLE COLOR LED with peak wavelength of 565nm. With max forward current of 0.0075A, it's ideal for applications requiring high efficiency green light emission in a compact form factor.
Fairchild Semiconductor
Fairchild Semiconductor's HLMP-1790 is a 3mm single color LED with peak wavelength of 585nm. It has a max forward current of 0.0075A and forward voltage of 2.2V, suitable for applications requiring diffused green light emission in a radial mount configuration.
Qt Optoelectronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2; Lens Type: GREEN DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.0; Lens Type: TINTED DIFFUSED; Color: GREEN;
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.3; Lens Type: TINTED DIFFUSED; Terminal Finish: MATTE TIN;
Quality Technologies
SINGLE COLOR LED; No. of Functions: 1; Maximum Forward Current: .0075 A; Color: HIGH EFFICIENCY GREEN; Configuration: SINGLE; Minimum Operating Temperature: -55 Cel;
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Maximum Forward Voltage: 2.2 V; JESD-609 Code: e0;
HLMP1301
Aborn Electronics
Visible LEDs; Lens Type: DIFFUSED; Maximum Forward Voltage: 3 V; Peak Wavelength (nm): 635; Maximum Forward Current: .02 A; Minimum Operating Temperature: -55 Cel;
HLMP-1301
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.5; Lens Type: TINTED DIFFUSED; Viewing Angle: 90 deg;
National Semiconductor
HLMP1301 by National Semiconductor is a red visible LED with peak wavelength of 635nm and max forward current of 0.02A. With diffused lens type, it has min luminous intensity of 60cd and operates b/w -55 to 100°C. Ideal for applications requiring precise red light emission in a compact form factor.
SINGLE COLOR LED; Minimum Operating Temperature: -55 Cel; Color: HIGH EFFICIENCY RED; Shape: ROUND; Size: 3 mm; Configuration: SINGLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved