Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Fairchild Semiconductor's QTLP650C-7.TR is a 2mm single color LED with peak wavelength of 660nm. It has a max forward current of 0.04A and viewing angle of 140°. Ideal for surface mount applications, it offers water clear lens and nominal luminous intensity of 15.0mcd, making it suitable for various visible LED lighting projects.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Nova Conductors
AZTECH Wire
$18.992
Continental Prestige Electronics
Argo Parts USA
Supply Digital
Corphita
Bastille Electronics
This single configuration makes the LED easy to use and integrate into various electronic circuits.
The compact size of 2 mm makes this LED suitable for applications where space is limited.
With a high maximum forward current of 0.04 A, this LED can provide bright illumination efficiently.
The peak wavelength of 660 nm makes this LED ideal for applications requiring red light emission.
The water clear lens type ensures maximum light output and clarity for the emitted light.
Being a single color LED simplifies application design and allows for consistent color output.
With only 2 terminals, this LED is easy to solder and connect in circuits.
The high maximum operating temperature of 80 °C ensures the LED can function reliably in various environments.
The low height of 1.1 mm allows for a slim profile in applications where space is a constraint.
The rectangular shape offers ease of alignment and placement in electronic designs.
The low minimum operating temperature of -25 °C ensures the LED can operate in cold environments without issues.
The red color output is suitable for applications where red light is required for indicators or displays.
The TR packing method provides protection during shipping and handling, ensuring the LED arrives in good condition.
The 2.6 mm terminal pitch allows for easy mounting and soldering of the LED in circuit boards.
With a wide viewing angle of 140°, this LED can provide uniform illumination over a large area.
The nominal luminous intensity of 15.0 mcd ensures a bright and visible output for the LED.
The surface mounting feature allows for easy and secure installation on circuit boards without the need for additional hardware.
Visible LEDs QTLP650C-7.TR attributes and parameters. Explore more Visible LEDs devices from Fairchild Semiconductor
Color:
Configuration:
Maximum Forward Current:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Terminal Pitch:
Viewing Angle:
QTLP650C-7.TR Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR130T1G
Onsemi
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
1N4148
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
Continental Device India
Toshiba
Yangzhou Yangjie Electronics
MMBT2222ALT1G
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
General Instrument
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
2N7002
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
SML-D12M8WT86M
ROHM
ROHM SML-D12M8WT86M is a 1.2mm SINGLE COLOR LED with milky white lens emitting YELLOWISH GREEN light at 25.0mcd intensity. It has a max forward current of 0.02A and operates b/w -40 to 85°C, suitable for surface mount applications in various electronic devices.
NSPW510DS
Nichia
SINGLE COLOR LED; Terminal Finish: SILVER; JESD-609 Code: e4;
150141RV73100
Wuerth Elektronik & Kg
150141RV73100 by Wurth Elektronik is a dual-color LED with separate 2 elements, peak wavelengths of 630nm and 572nm, and a viewing angle of 120°. Ideal for surface mount applications in electronics, this LED has a compact size of 2.4mm and water-clear lens type. Operating temperatures range from -40°C to 85°C.
LTST-C170GKT
Lite-on Technology
LTST-C170GKT by Lite-on Technology is a 1.4mm GREEN LED with a peak wavelength of 565nm and max forward current of 0.03A. Ideal for surface mount applications, it offers a viewing angle of 130° and nominal luminous intensity of 6.0mcd, making it suitable for various lighting solutions.
150141BS73100
150141BS73100 by Wurth Elektronik is a 2.4mm BLUE LED with peak wavelength of 465nm, forward current of 0.03A, and luminous intensity of 270.0mcd. Ideal for surface mount applications in electronics, offering a wide viewing angle of 120° and operating temperatures from -40°C to 85°C.
HSMF-C118
Agilent Technologies
TRIPLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 90.0/120.0/40.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
LTST-C190KGKT
LTST-C190KGKT by Lite-on Technology is a 1.1mm GREEN LED with peak wavelength of 574nm, suitable for surface mount applications. It has a max forward current of 0.03A and viewing angle of 130°, making it ideal for low-power indicator lights in electronic devices. Operating temperature ranges from -30 to 85 °C.
HLMP-1790-101F
Dialight
The Dialight HLMP-1790-101F is a 3mm GREEN LED with peak wavelength of 565nm. It has a max forward current of 0.007A and viewing angle of 50deg. Ideal for applications requiring single color LEDs in radial mount configuration.
TLHK5800
Vishay Telefunken
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2500.0; Lens Type: UNTINTED NONDIFFUSED; Terminal Finish: Tin/Silver (Sn/Ag);
HLMP1700
Aborn Electronics
Visible LEDs; Lens Type: DIFFUSED; Height: 4.3 mm; Peak Wavelength (nm): 635; Minimum Operating Temperature: -55 Cel; Maximum Forward Current: .007 A;
597-6201-607F
Dialight's 597-6201-607F is a WATER CLEAR LED with peak wavelength of 611nm, forward current of 0.03A, and viewing angle of 70°. Ideal for applications requiring Amber light emission, such as indicator lights in electronic devices due to its compact size and low operating temperature range from -55°C to 85°C.
3007
Nte Electronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1.6; Configuration: SINGLE; Color: RED;
HLMP-1719
Everlight Electronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.0; Lens Type: TINTED DIFFUSED; Additional Features: HIGH RELIABILITY;
TLMY1100-GS08
Vishay Intertechnology
Vishay Intertechnology's TLMY1100-GS08 is a 1.6mm SINGLE COLOR LED with peak wavelength of 591nm, forward current of 0.03A, and luminous intensity of 0.05cd. Ideal for applications requiring YELLOW light emission in compact spaces with operating temperatures ranging from -40 to 100°C.
LHR974
LHR974 LED by Infineon has a peak wavelength of 660nm, forward current of 0.03A, and viewing angle of 160°. Ideal for applications requiring red light emission, such as indicator lights in automotive or consumer electronics due to its water diffused lens design.
155124VS73200
Wurth Elektronik's 155124VS73200 is a 2mm SINGLE COLOR LED with peak wavelength of 575nm and water clear lens. Ideal for applications requiring bright green light, it has a viewing angle of 120° and operates b/w -40 to 85 °C. Perfect for surface mount installations, it offers a nominal luminous intensity of 50.0 mcd at 0.025A forward current.
550-0405F
Dialight 550-0405F is a 5mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.04A and viewing angle of 60°. Ideal for applications requiring red light emission, such as indicator lights in electronic devices.
12-23C/R6GHBHC-A01/2C
Everlight Electronics' 12-23C/R6GHBHC-A01/2C is a 2mm COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 632nm, 518nm, and 468nm. It has a max forward current of 0.025A and water-clear lens type. Ideal for applications requiring brilliant red, green, and blue colors with surface mounting feature.
SSL-LX5093IGW
Lumex
The Lumex SSL-LX5093IGW is a 5mm dual-color LED with red/green colors, diffused milky white lens, and common bipolar terminal. It has a max forward current of 0.03A, peak wavelengths of 635nm/565nm, and nominal luminous intensity of 30.0/20.0 mcd. Ideal for applications requiring radial mounting such as indicator lights in electronic devices.
SML-D12U8WT86
ROHM's SML-D12U8WT86 is a 1.2mm SINGLE COLOR LED with 0.02A forward current, emitting RED light at 63.0mcd intensity. Ideal for surface mount applications in electronics, it operates b/w -40 to 85°C temperatures and has a max reverse voltage of 5V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
QTLP650C2TR
The Everlight Electronics QTLP650C2TR is a 2mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.03A and viewing angle of 140°, making it ideal for high efficiency red lighting applications in various industries. With water clear lens and surface mounting feature, this LED operates b/w -40°C to 85°C temperature range.
QTLP650C-2.TR
Qt Optoelectronics
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6; Lens Type: WATER CLEAR; Configuration: SINGLE;
Fairchild Semiconductor
Fairchild Semiconductor's QTLP650C-2.TR is a 2mm single color LED with peak wavelength of 640nm. It has a max forward current of 0.03A and viewing angle of 140°. Ideal for surface mount applications, it offers water clear lens and nominal luminous intensity of 6mcd, making it suitable for various visible LED lighting projects.
QTLP650C7TR
Visible LEDs; Lens Type: WATER CLEAR; Peak Wavelength (nm): 660; Maximum Operating Temperature: 80 Cel; Color At Wavelength: Red; Maximum Forward Current: 40 A;
Fairchild Semiconductor's QTLP650C7TR LED has a peak wavelength of 660nm and max forward current of 40A. With water-clear lens, it operates b/w -25°C to 80°C. Ideal for applications requiring red light emission with a wide 140° viewing angle.
QTLP650C-7.TR
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: WATER CLEAR; Shape: RECTANGULAR;
QTLP650C24TR
Visible LEDs; Lens Type: WATER CLEAR; Viewing Angle: 0 deg; Color At Wavelength: Green/Orange-Red; Maximum Reverse Voltage: 5 V; Minimum Operating Temperature: -40 Cel;
QTLP650C-24.TR
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 4/6.5; Lens Type: WATER CLEAR; Height: 1.1 mm;
Fairchild Semiconductor's QTLP650C24TR LED has a max forward current of 0.03A and water-clear lens type. With a max operating temp of 85°C, it emits green/orange-red light at 140° viewing angle. Ideal for applications requiring low power consumption and vibrant lighting in various environments.
QTLP670C-4.TR
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 25; Lens Type: NONDIFFUSED; Packing Method: TR;
QTLP670C-4TR
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 25.0; Lens Type: WATER CLEAR; Shape: ROUND;
QTLP670C4TR
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 25.0; Lens Type: WATER CLEAR; Viewing Angle: 120 deg;
QTLP650C-4.TR
Fairchild Semiconductor's QTLP650C-4.TR is a 2mm single color LED with peak wavelength of 570nm. It has a max forward current of 0.03A and viewing angle of 140°. Ideal for surface mount applications, it offers water clear lens type and nominal luminous intensity of 10mcd.
QTLP650C-4TR
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: WATER CLEAR; Terminal Pitch: 3.75 mm;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10; Lens Type: WATER CLEAR; Size: 2 mm;
QTLP650C4TR
Fairchild Semiconductor's QTLP650C4TR LED has a max forward current of 30A, peak wavelength of 570nm, and water-clear lens. Ideal for applications requiring green light emission with a viewing angle of 140°. Operates b/w -25°C to 80°C, making it suitable for various lighting needs.
QTLP630C-7TR
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 20.0; Lens Type: WATER CLEAR; Configuration: SINGLE;
QTLP650C-3
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6; Lens Type: WATER CLEAR; Terminal Finish: Tin/Lead (Sn/Pb);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved