Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Visible LEDs; Lens Type: DIFFUSED; Maximum Forward Voltage: 3 V; Maximum Reverse Voltage: 6 V; Peak Wavelength (nm): 565; Viewing Angle: 30 deg;
Median Price
$0.407
Lifecycle Status
Suppliers In-Stock
37
In-Stock Inventory
1k+
RS Americas
1+ parts
$0.093
100+ parts
-
1k+ parts
10k+ parts
Conrad
$0.268
$0.236
Chip1Stop
$0.332
Distrelec
$0.204
Arrow
$0.559
$0.279
$0.215
$0.192
Mouser Electronics
$0.580
$0.281
$0.233
$0.190
RS (Exports)
$0.590
$0.461
Newark
$0.597
$0.295
$0.230
DigiKey
$0.640
$0.321
$0.248
$0.205
Adafruit Industries
$0.648
$0.615
Verical
$0.193
TTI Europe
$0.115
Element14
$17.020
$14.220
TTI
$0.231
$0.225
$0.218
Bürklin Elektronik
$0.154
$0.135
Nova Conductors
$0.202
TME
$0.560
$0.217
$0.175
$0.159
Pegasus Components GmbH
Holdelec - ElecDif-Pro
Vyrian
R&J Components
LIBRA Elektronik GmbH
Chip Stock
ComSIT Distribution GmbH
Rutronik
$0.124
NAC Semi
Bristol Electronics
Goldney Electronics S.L.
ACDS - Activité Composants Distribution Service
Resion
Manotoh
Q Components
LWI Electronics Inc
ComSIT USA
Fibra_Brandt Electronic GMBH
A&K Electronics
Rotakorn
Ampacity Inc.
$0.060
Semicontronic
$0.079
$0.077
Argo Parts USA
$0.196
Netroflash
$0.187
Component Stockers USA
$0.330
$0.210
$0.170
$0.150
Allen Electronics Distributors
$0.367
$0.349
$0.272
Continental Prestige Electronics
$0.454
$0.195
$0.142
$0.133
Aztec Data Supply Inc.
$0.485
Corohmni
$0.517
Advanced Electronics
Perfect Parts
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
Authorized Procurement Solutions
GreenTree Electronics
QUARKTWIN TECHNOLOGY LTD
Eastek
Assy Fe
iodParts Technologies Inc.
Kepictronics
Computer Components Inc. - USA
Speed Components Ltd (Excess)
Visible LEDs TLHG4400 attributes and parameters. Explore more Visible LEDs devices from Telefunken Microelectronics
Color At Wavelength:
Maximum Forward Current:
Maximum Forward Voltage:
Lens Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Sub-Category:
Viewing Angle:
TLHG4400 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Assembly/Origin - OMV-767-2014-Rev-0 22/Jul/2014
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
BAV99
Infinex
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
Cheng-yi Electronic
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
LM107H/883
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
Plessey Semiconductors Discrete Components Div
Other Transistors;
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
Itt Semiconductor
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
Goodwork Semiconductor
Fagor Electronica S Coop
SML-D12U1WT86Q
ROHM
ROHM's SML-D12U1WT86Q is a 1.2mm SINGLE COLOR LED with MILKY WHITE lens emitting RED light. It has a max forward current of 0.02A, luminous intensity of 51.5mcd, and operates b/w -40 to 85°C. Ideal for surface mount applications requiring compact visible LEDs.
597-2301-213F
Dialight
Dialight's 597-2301-213F is a single color LED with peak wavelength of 572nm, forward current of 0.02A, and luminous intensity of 31.0mcd. Ideal for surface mount applications, it emits green light with a viewing angle of 120°.
555-2403F
Dialight's 555-2403F LED is a 2mm single color with built-in resistor, emitting yellow light at peak wavelength of 583nm. With max forward current of 0.0067A and voltage of 2.4V, it's ideal for radial mounting applications requiring diffused illumination in a compact space.
HLMP1700
Aborn Electronics
Visible LEDs; Lens Type: DIFFUSED; Height: 4.3 mm; Peak Wavelength (nm): 635; Minimum Operating Temperature: -55 Cel; Maximum Forward Current: .007 A;
LTST-C155KGJRKT
Lite-on Technology
LTST-C155KGJRKT by Lite-on Technology is a 2.7mm dual-color LED with peak wavelengths of 639nm and 574nm. With a max forward current of 0.03A, it's ideal for applications requiring separate red and green elements in a compact surface-mount configuration. Operating temperatures range from -55°C to 85°C, making it suitable for various lighting solutions.
LGR971
Mentor & Prazisions Bauteile Kg
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 26.05; Lens Type: COLORLESS DIFFUSED; Terminal Finish: TIN;
3018
Nte Electronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1.6; Shape: ROUND; Maximum Forward Current: .1 A;
HSMH-C191
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 17.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
5310F5
Industrial Devices
Visible LEDs; Lens Type: DIFFUSED; Color At Wavelength: Green; Height: 11 mm; Viewing Angle: 90 deg; Maximum Forward Current: .03 A;
HSMG-C170
Broadcom
HSMG-C170 by Broadcom is a 1.4mm SINGLE COLOR LED with peak wavelength of 570nm, ideal for applications requiring green light emission. With max forward current of 0.02A and viewing angle of 170°, it operates b/w -40 to 85 °C, making it suitable for surface mount configurations in various electronic devices.
LTST-C170KSKT
LTST-C170KSKT by Lite-on Technology is a 1.4mm YELLOW LED with WATER CLEAR lens, peak wavelength of 588nm, and max forward current of 0.03A. Ideal for surface mount applications, it has a viewing angle of 130° and nominal luminous intensity of 70.0mcd.
HSMS-C170
Hewlett Packard
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10; Lens Type: DIFFUSED; Maximum Forward Current: .02 A;
TLHG4400
Vishay Telefunken
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 4.0; Lens Type: TINTED DIFFUSED; Terminal Pitch: 2.54 mm;
551-1107-004F
Dialight's 551-1107-004F is a 3mm red LED array with 4 separate elements. It has a peak wavelength of 635nm, forward current of 0.007A, and operates b/w -55 to 100°C. Ideal for applications requiring high luminous intensity in a compact design.
BR1111C-TR
Stanley Electric
Stanley Electric's BR1111C-TR is a 1.2mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.025A. Ideal for surface mount applications, it offers a viewing angle of 141° and nominal luminous intensity of 11.7mcd, making it suitable for various visible LED lighting projects.
HSMF-C113
HSMF-C113 by Broadcom is a 3-element COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 637/570/468 nm. With a size of 2.1 mm and max forward current of 0.02 A, it's ideal for surface mount applications requiring red/green/blue illumination at a viewing angle of 120°.
VLMY1300-GS08
Vishay Intertechnology
Vishay Intertechnology's VLMY1300-GS08 is a 1.1mm YELLOW LED with peak wavelength of 588nm, max forward current of 0.03A, and viewing angle of 130°. Ideal for surface mount applications in electronics, it operates b/w -35 to 85 °C with a max forward voltage of 2.4V.
SLI-570UT3F
ROHM's SLI-570UT3F is a 5mm SINGLE COLOR LED with peak wavelength of 630nm and forward current of 0.05A. Ideal for applications requiring red light emission, such as indicator lights in electronic devices.
150141BS73100
Wuerth Elektronik & Kg
150141BS73100 by Wurth Elektronik is a 2.4mm BLUE LED with peak wavelength of 465nm, forward current of 0.03A, and luminous intensity of 270.0mcd. Ideal for surface mount applications in electronics, offering a wide viewing angle of 120° and operating temperatures from -40°C to 85°C.
HLMP-3401
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Shape: ROUND; T-code: T-1 3/4; Size: 5 mm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Temic Semiconductors
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 4.0; Lens Type: TINTED DIFFUSED; Size: 3 mm;
TLHG4400 by Vishay Intertechnology is a 3mm single color LED with a peak wavelength of 605nm. It has a max forward current of 0.03A and a viewing angle of 60°. This LED is commonly used in applications such as indicator lights and displays.
TLHG4400-MS12
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 13.0; Lens Type: TINTED DIFFUSED; Terminal Finish: Matte Tin (Sn);
TLHG4400AS12
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 4.0; Lens Type: TINTED DIFFUSED; Peak Wavelength (nm): 565;
TLHG4400-AS12
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 13.0; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Silver (Sn/Ag);
TLHG4400AS12Z
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 4.0; Lens Type: TINTED DIFFUSED; Height: 4.5 mm;
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Silver (Sn/Ag); JESD-609 Code: e2; Maximum Reverse Voltage: 6 V; Viewing Angle: 60 deg;
TLHG44K1L2
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.55; Lens Type: TINTED DIFFUSED; Peak Wavelength (nm): 565;
TLHG4400AS21
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 4.0; Lens Type: TINTED DIFFUSED; Maximum Forward Current: .03 A;
Visible LEDs; Lens Type: DIFFUSED; Maximum Forward Voltage: 3 V; Peak Wavelength (nm): 565; Maximum Forward Current: .03 A; Color At Wavelength: Green;
TLHG5400
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: TINTED DIFFUSED; Terminal Finish: TIN SILVER;
Telefunken Microelectronics
Visible LEDs; Lens Type: DIFFUSED; Maximum Forward Current: .03 A; Minimum Operating Temperature: -20 Cel; Maximum Reverse Voltage: 6 V; Viewing Angle: 30 deg;
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 4.0; Lens Type: TINTED DIFFUSED; No. of Functions: 1;
TLHG4405
Visible LEDs; Lens Type: DIFFUSED; Viewing Angle: 30 deg; Maximum Reverse Voltage: 6 V; Height: 4.5 mm; Peak Wavelength (nm): 565;
TLHG44K1L2-MS21
Visible LEDs; Lens Type: DIFFUSED; Viewing Angle: 0 deg; Minimum Operating Temperature: -40 Cel; Maximum Forward Current: .03 A; Height: 4.5 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved