Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HLMP-1301 by Fairchild Semiconductor is a 3mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.03A and forward voltage of 3V, suitable for high efficiency red light applications. With a viewing angle of 60°, it is ideal for radial mounting in various electronic devices.
Median Price
$0.273
Lifecycle Status
Suppliers In-Stock
49
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
100+ parts
$0.259
1k+ parts
10k+ parts
-
Newark
$0.402
$0.195
$0.146
$0.118
Arrow
$0.435
$0.105
$0.084
Mouser Electronics
$0.460
$0.225
$0.166
$0.138
Element14
$0.271
$0.203
Farnell
$0.144
$0.108
EBV Elektronik
Verical
$0.162
$0.112
$0.085
Freelance Electronics
$0.065
Digiode
Nova Conductors
$0.322
TME
$0.350
$0.173
$0.143
$0.137
Component Electronics Inc.
$0.500
$0.380
$0.330
Vyrian
Q Components
Chip Stock
LIBRA Elektronik GmbH
R&J Components
J2 Sourcing AB
Anansix
Manoshevitz Elec. Sales
Prism Electronics
Component Sense
$0.060
ComSIT Distribution GmbH
ComSIT USA
Electronic Expediters
Bristol Electronics
Atlantic Semiconductor
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Sogenti Electronics
ECAB
Mentor Electronics Marketing, LLC
Sea View Technologies
Martec Srl
Connector Distribution Corp
Resion
Right Parts Inc.
Tectiva GmbH
PC Components Company LLC
North Shore Components
Inventory MP
Zilex Electronics Inc.
ABC Electronics Ltd.
Quantum Digital Technology
Mil-Aero Solutions, Inc.
LWI Electronics Inc
Sensible Micro Corp
EMSNET
Decca Corp
$0.070
$0.069
$0.068
Ampacity Inc.
Aztec Data Supply Inc.
$0.213
Corphita
$0.246
Aranea Global
$0.315
$0.303
Argo Parts USA
$0.312
Netroflash
Continental Prestige Electronics
$0.445
$0.142
$0.098
Corohmni
$0.584
Assy Fe
QUARKTWIN TECHNOLOGY LTD
Allen Electronics Distributors
$0.094
Authorized Procurement Solutions
Emar International I/E
Speed Components Ltd (Excess)
ChipTracer
Metaverse IC Inc.
Supply Digital
Cyclops Electronics Ltd (Excess)
GreenTree Electronics
Perfect Parts
Glotronic Ltd.
FE SAS
Amble Industries
Single configuration allows for easy integration into various electronic devices.
Compact size makes it suitable for applications where space is limited.
Low forward current consumption helps in energy efficiency.
Peak wavelength of 635 nm ensures bright and vibrant red color output.
Diffused lens type provides uniform light distribution and reduces glare.
Single color LED simplifies design and operation for specific color applications.
Having just 2 terminals makes it easy to solder and connect.
High maximum operating temperature ensures reliability in various environments.
Low height profile makes it suitable for compact designs.
Round shape provides a wide viewing angle for better visibility.
Low minimum operating temperature allows for use in extreme cold conditions.
Produces a vibrant red color output for visual indication purposes.
High efficiency red color provides bright and consistent illumination.
Bulk packing method is cost-effective for large scale production.
Standard terminal pitch allows for easy integration into existing circuit designs.
Wide viewing angle of 60° ensures visibility from various angles.
Nominal luminous intensity of 2.5 mcd provides bright illumination for visual indication.
Radial mounting feature simplifies installation and allows for easy positioning.
Low forward voltage requirement helps in energy efficiency and extends battery life.
Visible LEDs HLMP-1301 attributes and parameters. Explore more Visible LEDs devices from Fairchild Semiconductor
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Sub-Category:
T-code:
Terminal Pitch:
Viewing Angle:
HLMP-1301 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Design/Specification - Mult Dev Die Chg 1/Jul/2021
PCN Assembly/Origin - Mult Dev Term Finish Chg 8/Nov/2019
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
1N4148
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
Semitronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diodes Incorporated
Yangzhou Yangjie Electronics
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
L78L05ABZ-AP
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
Philips Components
SSL-LX5093XUSBC
Lumex
Lumex SSL-LX5093XUSBC is a 5mm WATER CLEAR LED with peak wavelength of 470nm. It has a max forward current of 0.025A and nominal luminous intensity of 2500mcd. Ideal for applications requiring ultra super blue light in a radial mount configuration.
LSGT676-P7R-1-0+N7P9-24-0-20-R18-ZB
Osram Opto Semiconductors
Osram Opto Semiconductors' LSGT676-P7R-1-0+N7P9-24-0-20-R18-ZB is a dual-color LED with peak wavelengths of 645nm and 572nm. It has a max forward current of 0.03A, viewing angle of 120°, and nominal luminous intensity of 118.0/68.0 mcd. Ideal for applications requiring separate color elements in compact spaces like indicator lights or displays.
571-0120-100F
Dialight
SINGLE COLOR LED ARRAY;
CMD6722SRUGCTR8
Visual Communications Company
CMD6722SRUGCTR8 by Visual Communications Company is a 2.4mm dual color LED with separate configuration and clear lens. It has a max forward current of 0.03A and peak wavelengths of 660nm (red) and 565nm (green). This surface mount LED is suitable for applications requiring a round shape, such as indicator lights or displays.
5201
Microprecision Electronics Sa
DUAL COLOR LED;
LTST-C190TBKT-5A
Lite-on Technology
LTST-C190TBKT-5A by Lite-on Technology is a 1.1mm BLUE LED with 0.02A current, peak wavelength of 468nm, and 130° viewing angle. Ideal for surface mount applications in electronics, it operates b/w -20°C to 80°C temperatures and has a luminous intensity of 28.1mcd.
553-0221F
Dialight 553-0221F is a dual color LED array with separate configuration, 3mm size, and 2 elements. It has peak wavelengths of 650nm (red) and 563nm (green), ideal for status indicators in electronics due to its high luminous intensity of 10/16mcd. With a max forward current of 0.007A and voltage of 3V, it operates b/w -55°C to 100°C temperature range.
LGR971-KN-1-0-20-R18
Osram Opto Semiconductors' LGR971-KN-1-0-20-R18 is a 1.3mm SINGLE COLOR LED with peak wavelength of 572nm, emitting GREEN light at 26.05mcd luminous intensity. Ideal for surface mount applications with a wide 160° viewing angle and operating temperature range from -30 to 85 °C.
HLMP-3301
Quality Technologies
SINGLE COLOR LED; Shape: ROUND; No. of Functions: 1; Size: 5 mm; Maximum Forward Current: .03 A; Color: HIGH EFFICIENCY RED;
HLMP-1503
Everlight Electronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.0; Lens Type: TINTED DIFFUSED; Maximum Reverse Voltage: 5 V;
555-2403F
Dialight's 555-2403F LED is a 2mm single color with built-in resistor, emitting yellow light at peak wavelength of 583nm. With max forward current of 0.0067A and voltage of 2.4V, it's ideal for radial mounting applications requiring diffused illumination in a compact space.
ASMB-MTB1-0B3A2
Broadcom
ASMB-MTB1-0B3A2 by Broadcom is a 2.4mm TRIPLE COLOR LED with COMMON ANODE, featuring peak wavelengths of 634/522/465nm and diffused lens. With max forward current of 0.025A, it offers red/green/blue colors and surface mounting for applications requiring high luminous intensity up to 2675mcd at a viewing angle of 115°.
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 7.0; Lens Type: TINTED DIFFUSED; Terminal Finish: MATTE TIN;
LSGT676-P7Q7-1+N7P7-24
Osram Opto Semiconductors' LSGT676-P7Q7-1+N7P7-24 is a dual-color LED with peak wavelengths of 645nm and 572nm. It has a max forward current of 0.03A, viewing angle of 120°, and nominal luminous intensity of 98.0/62.75mcd. Ideal for applications requiring super red/green colors in compact designs with surface mounting features.
597-3001-207F
Dialight's 597-3001-207F is a single color LED with peak wavelength of 630nm, forward current of 0.03A, and forward voltage of 2.8V. Ideal for applications requiring red light emission, such as indicator lights in electronic devices due to its water clear lens and surface mounting feature.
HLMP-1503-101F
Dialight's HLMP-1503-101F is a 3mm GREEN LED with peak wavelength of 565nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring single color LEDs in visible light spectrum, such as indicator lights and displays.
TLDR5400
Vishay Intertechnology
TLDR5400 by Vishay Intertechnology is a 5mm SINGLE COLOR LED with peak wavelength of 650nm. It has a max forward current of 0.05A and emits DEEP RED light. Ideal for applications requiring a viewing angle of 60°, such as indicator lights in electronic devices.
LTST-S270KRKT
LTST-S270KRKT by Lite-on Technology is a 1.2mm WATER CLEAR LED with peak wavelength of 639nm and max forward current of 0.03A. Ideal for applications requiring a red light source, such as indicator lights in electronic devices due to its high luminous intensity of 130cd at 2.4V forward voltage.
HSMF-C113
HSMF-C113 by Broadcom is a 3-element COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 637/570/468 nm. With a size of 2.1 mm and max forward current of 0.02 A, it's ideal for surface mount applications requiring red/green/blue illumination at a viewing angle of 120°.
564-0200-222F
Dialight's 564-0200-222F is a 3mm single color LED array with separate, 3-element configuration. It has a peak wavelength of 565nm and max forward current of 0.007A. Ideal for applications requiring green light emission, such as indicator lights in electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HLMP-3507
HLMP-3507 by Broadcom is a 5mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring high performance green light emission in bulk packaging, with radial mounting feature.
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.2; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
Hewlett Packard
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green; Height: 8.8 mm; No. of Functions: 1;
HLMP3507
Three-five Systems
HLMP3507 by Three-five Systems is a green LED with peak wavelength of 565nm and max forward current of 0.03A. With diffused lens, it has a viewing angle of 75° and operates b/w -55 to 100°C. Ideal for applications requiring low power consumption and precise color emission in various environments.
HLMP-1790-A00A2
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.3; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
Broadcom's HLMP-1790-A00A2 is a 3mm single color LED with peak wavelength of 565nm. With max forward current of 0.007A, it emits green light at 2.3mcd luminous intensity. Ideal for applications requiring a radial mount visible LED with a viewing angle of 50°.
HLMP-1790
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); T-code: T-1; Maximum Forward Voltage: 2.2 V; Viewing Angle: 50 deg;
HLMP1790
Cml Technologies & Kg
HLMP1790 by Cml Technologies & Kg is a 3mm SINGLE COLOR LED with peak wavelength of 565nm. With max forward current of 0.0075A, it's ideal for applications requiring high efficiency green light emission in a compact form factor.
Fairchild Semiconductor
Fairchild Semiconductor's HLMP-1790 is a 3mm single color LED with peak wavelength of 585nm. It has a max forward current of 0.0075A and forward voltage of 2.2V, suitable for applications requiring diffused green light emission in a radial mount configuration.
Qt Optoelectronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2; Lens Type: GREEN DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.0; Lens Type: TINTED DIFFUSED; Color: GREEN;
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.3; Lens Type: TINTED DIFFUSED; Terminal Finish: MATTE TIN;
SINGLE COLOR LED; No. of Functions: 1; Maximum Forward Current: .0075 A; Color: HIGH EFFICIENCY GREEN; Configuration: SINGLE; Minimum Operating Temperature: -55 Cel;
Vch
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green; Viewing Angle: 50 deg; Minimum Operating Temperature: -55 Cel;
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Maximum Forward Voltage: 2.2 V; JESD-609 Code: e0;
HLMP1301
Aborn Electronics
Visible LEDs; Lens Type: DIFFUSED; Maximum Forward Voltage: 3 V; Peak Wavelength (nm): 635; Maximum Forward Current: .02 A; Minimum Operating Temperature: -55 Cel;
HLMP-1301
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.5; Lens Type: TINTED DIFFUSED; Viewing Angle: 90 deg;
HLMP1301 by National Semiconductor is a red visible LED with peak wavelength of 635nm and max forward current of 0.02A. With diffused lens type, it has min luminous intensity of 60cd and operates b/w -55 to 100°C. Ideal for applications requiring precise red light emission in a compact form factor.
SINGLE COLOR LED; Minimum Operating Temperature: -55 Cel; Color: HIGH EFFICIENCY RED; Shape: ROUND; Size: 3 mm; Configuration: SINGLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved