Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HLMP3507 by Three-five Systems is a green LED with peak wavelength of 565nm and max forward current of 0.03A. With diffused lens, it has a viewing angle of 75° and operates b/w -55 to 100°C. Ideal for applications requiring low power consumption and precise color emission in various environments.
Median Price
$0.402
Lifecycle Status
Suppliers In-Stock
70
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.381
100+ parts
$0.347
1k+ parts
$0.312
10k+ parts
-
Newark
$0.195
$0.146
$0.118
Mouser Electronics
$0.490
$0.237
$0.180
$0.142
DigiKey
$0.520
$0.256
$0.160
EBV Elektronik
Element14
$0.478
$0.291
Farnell
$0.140
$0.106
Avnet
$0.108
Nova Conductors
$0.131
DF Sales Co.
$0.240
Digiode
$0.362
TME
$0.480
$0.182
$0.128
Component Electronics Inc.
$0.770
$0.580
$0.500
Vyrian
Amar Radio Corporation
HZD GmbH
Bristol Electronics
Zilex Electronics Inc.
Pegasus Components GmbH
ABC Electronics Ltd.
Martec Srl
Classic Components Corporation
LWI Electronics Inc
A&K Electronics
Rotakorn
Component Sense
Vectronix, Inc
Inventory MP
Chip Stock
Q Components
LIBRA Elektronik GmbH
PC Components Company LLC
Beltway Electronics Company
Connector Distribution Corp
Right Parts Inc.
Mil-Aero Solutions, Inc.
Astute Electronics Inc
ECAB
ACDS - Activité Composants Distribution Service
MISTER SPROCKETS
Prism Electronics
North Shore Components
Sea View Technologies
Extreme Components
Sogenti Electronics
Electronics Depot
Atlantic Semiconductor
Ashlea Components Ltd
Inland Empire Components Inc.
Lakeland Logistics Inc
Semi Source
Holdelec - ElecDif-Pro
Resion
Elcom Components
Sensible Micro Corp
Lakeview Electronics
First Choice Components Inc.
Speed Components Ltd
Legend Electronics Inc.
EMSNET
ComSIT Distribution GmbH
ComSIT USA
Sunrise Surplus Inc.
Euro-Tech
LittleDiode
Electronic Expediters
Rebound Electronics
A2Z Electronics, Inc.
Cyclops Electronics Ltd
Decca Corp
$0.060
$0.059
$0.058
Continental Prestige Electronics
Argo Parts USA
$0.127
Bastille Electronics
$0.124
$0.117
Corphita
$0.343
Advanced Electronics
Corohmni
$0.643
Aztec Data Supply Inc.
$0.766
Perfect Parts
CPlus Electronics
Allen Electronics Distributors
$0.152
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Cyclops Electronics Ltd (Excess)
GreenTree Electronics
Kepictronics
A-Z Elektronik GmbH
Speed Components Ltd (Excess)
Alle Elektronik GmbH
Amble Industries
Glotronic Ltd.
Authorized Procurement Solutions
Supply Digital
EMSNET (Excess)
Computer Components Inc. - USA
Infinite Electronics LLP (Excess)
The low forward current ensures efficient energy consumption and helps in prolonging the lifespan of the LED.
The specific peak wavelength of 565 nm ensures that the LED emits a green color, making it suitable for various applications such as indicators and displays.
The diffused lens type helps in evenly distributing light and reducing glare, making the LED more visually appealing and suitable for applications where uniform lighting is required.
The high maximum operating temperature of 100°C ensures that the LED can withstand elevated temperatures without compromising its performance or longevity.
The compact height of 8.8 mm makes the LED suitable for applications with space constraints while still providing adequate illumination.
The low minimum operating temperature of -55°C ensures that the LED can function effectively in colder environments without any performance issues.
The tin/lead terminal finish provides good solderability and conductivity, making it easy to integrate the LED into electronic circuits.
The specific green color emitted at the wavelength of 565 nm makes the LED ideal for applications where green light is desired, such as traffic signals or signage.
The wide viewing angle of 75° ensures that the LED can be easily seen from different perspectives, making it suitable for applications where visibility is crucial.
The low forward voltage of 3V ensures that the LED can be powered using standard voltage sources, making it easy to integrate into existing circuits.
Visible LEDs HLMP3507 attributes and parameters. Explore more Visible LEDs devices from Three-five Systems
Color At Wavelength:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Lens Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height:
Peak Wavelength (nm):
Sub-Category:
Terminal Finish:
Viewing Angle:
HLMP3507 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
NSN
5980-01-178-0898, 5980011780898, 5980-01-202-4497, 5980012024497
NIIN
011780898, 012024497
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F405RGT6TR
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Instrument
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
Semtech
STM32H743ZIT6
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
L7805CV
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
HSMZ-C190
Broadcom
HSMZ-C190 by Broadcom is a 1mm red LED with peak wavelength of 643nm. It has a max forward current of 0.025A and viewing angle of 170°. Ideal for surface mount applications in electronics, displays, and indicator lights due to its compact size and high luminous intensity.
XHP35A-00-0000-0D0BD440E
Wolfspeed
Wolfspeed's XHP35A-00-0000-0D0BD440E is a 2.8mm high SINGLE COLOR LED with max forward current of 1.05A and min luminous intensity of 125cd. Ideal for applications requiring white light at a wavelength, with max forward voltage of 11.9V and reverse voltage of 5V.
CMD15-21VGD/TR8
Cml Technologies & Kg
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6.5; Lens Type: DIFFUSED; Height: 1.1 mm;
LGY876-P1Q2-24-Z
Osram Opto Semiconductors
LGY876-P1Q2-24-Z by Osram Opto Semiconductors is a 1.7mm single color LED with peak wavelength of 572nm and green color. It has a max forward current of 0.03A, viewing angle of 120°, and nominal luminous intensity of 78.5mcd. Ideal for surface mount applications in electronics requiring compact, energy-efficient lighting solutions.
KP-1608SRC-PRV
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Shape: RECTANGULAR;
HLMP1700
Aborn Electronics
Visible LEDs; Lens Type: DIFFUSED; Height: 4.3 mm; Peak Wavelength (nm): 635; Minimum Operating Temperature: -55 Cel; Maximum Forward Current: .007 A;
SSL-LX5093SUGC
Lumex
SSL-LX5093SUGC by Lumex is a 5mm single color LED with built-in resistor. It has a peak wavelength of 574nm, viewing angle of 30°, and luminous intensity of 1000.0mcd. Ideal for applications requiring super ultra green light emission in bulk packaging for radial mounting setups.
564-0100-111F
Dialight
Dialight's 564-0100-111F is a 3mm red LED array with separate, 3-element configuration. It has a peak wavelength of 635nm and max forward current of 0.03A. Ideal for applications requiring high luminous intensity in a compact size.
TLMS1000-GS08
Vishay Intertechnology
TLMS1000-GS08 by Vishay Intertechnology is a 1.6mm SINGLE COLOR LED with peak wavelength of 640nm and max forward current of 0.015A. Ideal for applications requiring RED light emission, such as indicator lights in electronic devices due to its compact size and surface mounting feature.
598-8250-107F
Dialight's 598-8250-107F is a 2mm WATER CLEAR LED with 0.025A max forward current, emitting YELLOW light at 130.0mcd luminous intensity. Ideal for surface mount applications in electronics, offering a wide 140° viewing angle and operating temperature range of -30 to 85°C.
AAA3528LSEEZGKQBKS
Kingbright Electronic
Kingbright Electronic's AAA3528LSEEZGKQBKS is a 2.4mm COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 630/515/460nm. It has a max forward current of 0.03A and viewing angle of 120°, suitable for surface mount applications in hyper red/green/blue lighting scenarios.
HSMS-C150
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: DIFFUSED; Configuration: SINGLE;
SML-D12U1WT86Q
ROHM
ROHM's SML-D12U1WT86Q is a 1.2mm SINGLE COLOR LED with MILKY WHITE lens emitting RED light. It has a max forward current of 0.02A, luminous intensity of 51.5mcd, and operates b/w -40 to 85°C. Ideal for surface mount applications requiring compact visible LEDs.
SSL-LX3044LYD
SSL-LX3044LYD by Lumex is a 3mm single color LED with peak wavelength of 585nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring yellow light emission, such as indicator lights in electronic devices.
591-2301-013F
Dialight's 591-2301-013F is a single color LED with peak wavelength of 572nm, forward current of 0.03A, and luminous intensity of 4.8mcd. Ideal for surface mount applications, it emits green light with a viewing angle of 40°.
VLMG1300-GS08
VLMG1300-GS08 by Vishay Intertechnology is a single color LED with a peak wavelength of 574nm. It has a max forward current of 0.03A and a min luminous intensity of 0.018cd. This LED is suitable for applications requiring yellow-green light emission, such as display panels or indicator lights.
LSQ976
Elma Electronic
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Color: SUPER RED; Shape: RECTANGULAR; Height: .8 mm;
HLMP-1503-D0000
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6.15; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
571-0120-100F
SINGLE COLOR LED ARRAY;
OVLAW4CB7
Tt Electronics Plc
OVLAW4CB7 by Tt Electronics Plc is a 3.05mm SINGLE COLOR LED with WATER CLEAR lens, WHITE color, and 3500.0mcd luminous intensity. It operates b/w -40 to 85°C, has a forward current of 0.02A, and a viewing angle of 45°. Ideal for applications requiring high brightness in compact spaces like indicator lights or displays.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HLMP-3507
HLMP-3507 by Broadcom is a 5mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring high performance green light emission in bulk packaging, with radial mounting feature.
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.2; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
Hewlett Packard
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green; Height: 8.8 mm; No. of Functions: 1;
HLMP-1790-A00A2
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.3; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
Broadcom's HLMP-1790-A00A2 is a 3mm single color LED with peak wavelength of 565nm. With max forward current of 0.007A, it emits green light at 2.3mcd luminous intensity. Ideal for applications requiring a radial mount visible LED with a viewing angle of 50°.
HLMP-1790
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); T-code: T-1; Maximum Forward Voltage: 2.2 V; Viewing Angle: 50 deg;
HLMP1790
HLMP1790 by Cml Technologies & Kg is a 3mm SINGLE COLOR LED with peak wavelength of 565nm. With max forward current of 0.0075A, it's ideal for applications requiring high efficiency green light emission in a compact form factor.
Fairchild Semiconductor's HLMP-1790 is a 3mm single color LED with peak wavelength of 585nm. It has a max forward current of 0.0075A and forward voltage of 2.2V, suitable for applications requiring diffused green light emission in a radial mount configuration.
Qt Optoelectronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2; Lens Type: GREEN DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
Everlight Electronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.0; Lens Type: TINTED DIFFUSED; Color: GREEN;
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.3; Lens Type: TINTED DIFFUSED; Terminal Finish: MATTE TIN;
Quality Technologies
SINGLE COLOR LED; No. of Functions: 1; Maximum Forward Current: .0075 A; Color: HIGH EFFICIENCY GREEN; Configuration: SINGLE; Minimum Operating Temperature: -55 Cel;
Vch
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green; Viewing Angle: 50 deg; Minimum Operating Temperature: -55 Cel;
Three-five Systems
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -55 Cel; Maximum Forward Voltage: 2.2 V; JESD-609 Code: e0;
HLMP1301
Visible LEDs; Lens Type: DIFFUSED; Maximum Forward Voltage: 3 V; Peak Wavelength (nm): 635; Maximum Forward Current: .02 A; Minimum Operating Temperature: -55 Cel;
HLMP-1301
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.5; Lens Type: TINTED DIFFUSED; Viewing Angle: 90 deg;
National Semiconductor
HLMP1301 by National Semiconductor is a red visible LED with peak wavelength of 635nm and max forward current of 0.02A. With diffused lens type, it has min luminous intensity of 60cd and operates b/w -55 to 100°C. Ideal for applications requiring precise red light emission in a compact form factor.
SINGLE COLOR LED; Minimum Operating Temperature: -55 Cel; Color: HIGH EFFICIENCY RED; Shape: ROUND; Size: 3 mm; Configuration: SINGLE;
HLMP-3590-I0002
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 55.0; Lens Type: NONDIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved