Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 4.0; Lens Type: TINTED DIFFUSED; Terminal Pitch: 2.54 mm;
Median Price
$0.244
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.400
100+ parts
$0.197
1k+ parts
$0.149
10k+ parts
-
Mouser Electronics
$0.198
$0.139
$0.112
Newark
$0.529
$0.230
$0.141
$0.106
Farnell
$0.147
$0.101
Element14
$0.183
Avnet
Arrow
Verical
$0.153
$0.136
Nova Conductors
$0.108
TME
$0.380
$0.186
$0.125
$0.099
ACDS - Activité Composants Distribution Service
Vyrian
NAC Semi
$0.411
ComSIT Distribution GmbH
Ampacity Inc.
$0.033
Aranea Global
$0.102
Continental Prestige Electronics
Argo Parts USA
$0.105
Aztec Data Supply Inc.
$0.370
Corohmni
$0.456
Perfect Parts
QUARKTWIN TECHNOLOGY LTD
Eastek
Authorized Procurement Solutions
Glotronic Ltd.
Netroflash
$0.103
$0.100
Visible LEDs TLHG4400AS12 attributes and parameters. Explore more Visible LEDs devices from Temic Semiconductors
Color:
Configuration:
Maximum Forward Current:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
T-code:
Terminal Pitch:
Viewing Angle:
TLHG4400AS12 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
Gec Plessey Semiconductors
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
1N4148
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
International Semiconductor
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
4304H5
Industrial Devices
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Viewing Angle: 75 deg; Height: 9.4 mm;
OVM12F3W7
Optek Technology
SINGLE COLOR LED;
LTST-C150TBKT
Lite-on Technology
LTST-C150TBKT by Lite-on Technology is a 2.06mm BLUE LED with WATER CLEAR lens, operating at -20 to 80 °C. It has a peak wavelength of 468nm, forward current of 0.02A, and viewing angle of 130°. Ideal for surface mount applications requiring a single color LED with a luminous intensity of 70.0mcd.
XHP70D-00-0000-0D0HP250G
Cree Led
TLMS1100-GS08
Vishay Intertechnology
TLMS1100-GS08 by Vishay Intertechnology is a 1.6mm SINGLE COLOR LED with peak wavelength of 645nm, ideal for applications requiring RED light emission. It has a max forward current of 0.03A and viewing angle of 160°, suitable for surface mount configurations in various electronic devices.
KPTD-3216SURCK
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 500.0; Lens Type: WATER CLEAR; Shape: ROUND;
LGR971-LM
Osram Opto Semiconductors
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 19.6; Lens Type: COLORLESS DIFFUSED; Terminal Finish: Tin (Sn);
HLMP1301
Three-five Systems
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .02 A; Minimum Operating Temperature: -55 Cel; Height: 4 mm;
XHP35B-H0-0000-0D0HC450G
Wolfspeed
569-0117-700F
Dialight
The Dialight 569-0117-700F is a 3mm amber LED array with separate, 2-element configuration. It has a max forward current of 0.025A and peak wavelength of 600nm. This LED is commonly used in applications such as signage, indicator lights, and automotive lighting.
1304
Microprecision Electronics Sa
SLR-342VR3F
ROHM's SLR-342VR3F is a 3.1mm single color LED with peak wavelength of 650nm, diffused lens, and red color. It has 2 terminals with tin/silver/copper finish, T-1 code, and radial mount feature. Ideal for applications requiring visible LEDs in compact size like indicator lights or displays.
TLMG1100-GS08
Vishay Intertechnology's TLMG1100-GS08 is a 1.6mm GREEN LED with peak wavelength of 572nm, forward current of 0.03A, and forward voltage of 2.4V. Ideal for surface mount applications in visible LED displays due to its high luminous intensity of 35mcd and wide viewing angle of 160°.
HLMP-4740
Broadcom
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.3; Lens Type: TINTED DIFFUSED; Terminal Finish: MATTE TIN;
LTST-C170KRKT-5A
HLMP-3301
Fairchild Semiconductor
Fairchild Semiconductor's HLMP-3301 is a 5mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.03A and operates b/w -55°C to 100°C. Ideal for applications requiring high efficiency red light emission, such as indicator lights in electronic devices.
598-8110-107F
Dialight's 598-8110-107F is a single color LED with water clear lens, 1.2mm size, and red color. It has a max forward current of 0.025A and viewing angle of 140°. Ideal for surface mount applications requiring a compact rectangular shape and nominal luminous intensity of 40mcd at an operating temperature range from -30°C to 85°C.
L-934GD-5V
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15; Lens Type: DIFFUSED; Size: 3 mm;
22-23C/R6GHBHW-C01/2C
Everlight Electronics
Everlight Electronics' 22-23C/R6GHBHW-C01/2C is a 2mm COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 626nm, 518nm, and 468nm. With a viewing angle of 130° and diffused white lens, it's ideal for surface mount applications requiring brilliant red, green, and blue illumination.
MLCAWT-H1-0000-000XE1
Wolfspeed's MLCAWT-H1-0000-000XE1 is a white SINGLE COLOR LED with 3.4V max forward voltage and 120cd min luminous intensity. Ideal for applications requiring high brightness in compact spaces, with a max operating temperature of 150°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TLHG4400
Vishay Telefunken
Telefunken Microelectronics
Visible LEDs; Lens Type: DIFFUSED; Maximum Forward Voltage: 3 V; Maximum Reverse Voltage: 6 V; Peak Wavelength (nm): 565; Viewing Angle: 30 deg;
Temic Semiconductors
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 4.0; Lens Type: TINTED DIFFUSED; Size: 3 mm;
TLHG4400 by Vishay Intertechnology is a 3mm single color LED with a peak wavelength of 605nm. It has a max forward current of 0.03A and a viewing angle of 60°. This LED is commonly used in applications such as indicator lights and displays.
TLHG4400-MS12
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 13.0; Lens Type: TINTED DIFFUSED; Terminal Finish: Matte Tin (Sn);
TLHG4400AS12
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 4.0; Lens Type: TINTED DIFFUSED; Peak Wavelength (nm): 565;
TLHG4400-AS12
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 13.0; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Silver (Sn/Ag);
TLHG4400AS12Z
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 4.0; Lens Type: TINTED DIFFUSED; Height: 4.5 mm;
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Silver (Sn/Ag); JESD-609 Code: e2; Maximum Reverse Voltage: 6 V; Viewing Angle: 60 deg;
TLHG44K1L2
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.55; Lens Type: TINTED DIFFUSED; Peak Wavelength (nm): 565;
TLHG4400AS21
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 4.0; Lens Type: TINTED DIFFUSED; Maximum Forward Current: .03 A;
Visible LEDs; Lens Type: DIFFUSED; Maximum Forward Voltage: 3 V; Peak Wavelength (nm): 565; Maximum Forward Current: .03 A; Color At Wavelength: Green;
TLHG5400
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: TINTED DIFFUSED; Terminal Finish: TIN SILVER;
Visible LEDs; Lens Type: DIFFUSED; Maximum Forward Current: .03 A; Minimum Operating Temperature: -20 Cel; Maximum Reverse Voltage: 6 V; Viewing Angle: 30 deg;
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 4.0; Lens Type: TINTED DIFFUSED; No. of Functions: 1;
TLHG4405
Visible LEDs; Lens Type: DIFFUSED; Viewing Angle: 30 deg; Maximum Reverse Voltage: 6 V; Height: 4.5 mm; Peak Wavelength (nm): 565;
TLHG4400BT12Z
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved