Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Fairchild Semiconductor's QTLP650C-24.TR is a dual-color LED with separate configuration, 2.7mm size, and water-clear lens. It emits high-efficiency red/green light at peak wavelengths of 635nm/565nm. Ideal for surface mount applications requiring a viewing angle of 140° and nominal luminous intensity of 4/6.5 mcd.
Median Price
$0.718
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Freelance Electronics
1+ parts
100+ parts
$0.753
1k+ parts
$0.710
10k+ parts
-
Vyrian
Digiode
Nova Conductors
AZTECH Wire
$15.928
Authorized Procurement Solutions
Continental Prestige Electronics
Supply Digital
Corphita
Argo Parts USA
Bastille Electronics
This configuration allows for the separate control of red and green elements, providing flexibility in creating different color combinations.
The compact size makes this LED suitable for applications where space is limited.
The specific peak wavelengths of red and green colors ensure vibrant and accurate color output.
The water clear lens enhances the brightness and clarity of the emitted light.
Being a dual-color LED, this product can produce a wide range of colors and effects, making it versatile for various lighting applications.
The 4 terminals provide stable connections and allow for independent control of the red and green elements.
The low height profile makes this LED suitable for applications where space constraints are a concern.
The rectangular shape allows for easy integration into circuit boards or mounting surfaces.
The high efficiency of the red and green colors ensures bright and energy-efficient lighting.
The TR packing method ensures secure and organized storage and handling of the LEDs.
The 2.65 mm terminal pitch facilitates easy soldering and connection in circuit board assembly.
The wide viewing angle of 140° ensures good visibility from various viewing positions.
The nominal luminous intensity values of 4 and 6.5 mcd indicate the brightness levels of the red and green elements respectively.
The surface mount feature simplifies the installation process and allows for secure mounting on PCBs.
Visible LEDs QTLP650C-24.TR attributes and parameters. Explore more Visible LEDs devices from Fairchild Semiconductor
Color:
Configuration:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Terminal Pitch:
Viewing Angle:
QTLP650C-24.TR Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
1N4148
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
Comchip Technology
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Weitronic Enterprise
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
Sangdest Microelectronics (Nanjing)
Changzhou Starsea Electronics
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diotec Electronics
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
Eic Semiconductor
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
LGL29K-G2J1-24-Z
Osram Opto Semiconductors
Osram Opto Semiconductors' LGL29K-G2J1-24-Z is a 1.3mm single color LED with peak wavelength of 572nm and max forward current of 0.02A. Ideal for applications requiring green light emission, such as indicator lights in electronic devices. Operating temperature range from -40 to 100°C makes it versatile for various environments.
CLX6F-FKC-CNP1ST1E1BB7D3D3
Cree Led
TRIPLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Nominal Luminous Intensity (mcd): 877.5/1405.0/267.5; Packing Method: TR, 13 INCH; Maximum Reverse Voltage: 5 V;
APT1608SURCK
Kingbright Electronic
Kingbright Electronic's APT1608SURCK is a 1.2mm SINGLE COLOR LED with peak wavelength of 650nm and max forward current of 0.03A. Ideal for applications requiring HYPER RED light, such as indicator lights in electronic devices due to its WATER CLEAR lens and surface mounting feature.
HSMS-C150
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: DIFFUSED; Configuration: SINGLE;
HSMS-C191
Broadcom
HSMS-C191 by Broadcom is a 1mm SINGLE COLOR LED with peak wavelength of 630nm. It has a max forward current of 0.02A and operates b/w -40 to 85°C. Ideal for applications requiring high efficiency red or orange light emission, such as in surface mount configurations.
HLMP-4700
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.3; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
UHD1110-FKA-CL1A13R3Q1BBQFMF3
Wolfspeed
UHD1110-FKA-CL1A13R3Q1BBQFMF3 by Wolfspeed is a COMMON ANODE TRIPLE COLOR LED with 4 terminals. It has a Max Forward Current of 0.01 A and Max Operating Temperature of 85°C. Ideal for applications requiring RGB color output in compact spaces.
158563440
Wuerth Elektronik & Kg
SINGLE COLOR LED;
SML-P11UTT86R
ROHM SML-P11UTT86R is a 0.6mm SINGLE COLOR LED with 0.02A forward current, emitting RED light at 2.5mcd luminous intensity. Ideal for surface mount applications in electronics due to its small size and color clarity.
CMD6722SRUGCTR8
Visual Communications Company
CMD6722SRUGCTR8 by Visual Communications Company is a 2.4mm dual color LED with separate configuration and clear lens. It has a max forward current of 0.03A and peak wavelengths of 660nm (red) and 565nm (green). This surface mount LED is suitable for applications requiring a round shape, such as indicator lights or displays.
HSMA-C190
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 90.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
597-7701-202F
Dialight
The Dialight 597-7701-202F is a dual color LED with separate configuration and a size of 2.39 mm. It has a max forward current of 0.03 A and peak wavelengths of 635 nm (super red) and 572 nm (green). This LED is suitable for surface mount applications requiring water clear lenses and offers a viewing angle of 120°.
LTST-C155KGJRKT
Lite-on Technology
LTST-C155KGJRKT by Lite-on Technology is a 2.7mm dual-color LED with peak wavelengths of 639nm and 574nm. With a max forward current of 0.03A, it's ideal for applications requiring separate red and green elements in a compact surface-mount configuration. Operating temperatures range from -55°C to 85°C, making it suitable for various lighting solutions.
HLMP-3507-D0001
HLMP-3507-D0001 by Broadcom is a 5mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring high performance green light emission in radial mounting configurations.
HLMP-1719
Hewlett Packard
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: SINGLE; JESD-609 Code: e0; T-code: T-1;
APT1608SRCPRV
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Terminal Pitch: 1.65 mm;
HLMP-1700-B0002
Broadcom's HLMP-1700-B0002 is a 3mm single color LED with peak wavelength of 635nm. With max forward current of 0.007A, it emits high efficiency red light ideal for applications requiring a viewing angle of 50°. Suitable for radial mounting, this LED operates b/w -40°C to 100°C temperature range.
XHP35B-H0-0000-0D0UB440G
5310F5
Cml Technologies & Kg
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 16.0; Lens Type: DIFFUSED; T-code: T-1;
HLMP-1790
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
QTLP650C2TR
Everlight Electronics
The Everlight Electronics QTLP650C2TR is a 2mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.03A and viewing angle of 140°, making it ideal for high efficiency red lighting applications in various industries. With water clear lens and surface mounting feature, this LED operates b/w -40°C to 85°C temperature range.
QTLP650C-2.TR
Qt Optoelectronics
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6; Lens Type: WATER CLEAR; Configuration: SINGLE;
Fairchild Semiconductor's QTLP650C-2.TR is a 2mm single color LED with peak wavelength of 640nm. It has a max forward current of 0.03A and viewing angle of 140°. Ideal for surface mount applications, it offers water clear lens and nominal luminous intensity of 6mcd, making it suitable for various visible LED lighting projects.
QTLP650C7TR
Visible LEDs; Lens Type: WATER CLEAR; Peak Wavelength (nm): 660; Maximum Operating Temperature: 80 Cel; Color At Wavelength: Red; Maximum Forward Current: 40 A;
Fairchild Semiconductor's QTLP650C7TR LED has a peak wavelength of 660nm and max forward current of 40A. With water-clear lens, it operates b/w -25°C to 80°C. Ideal for applications requiring red light emission with a wide 140° viewing angle.
QTLP650C-7.TR
Fairchild Semiconductor's QTLP650C-7.TR is a 2mm single color LED with peak wavelength of 660nm. It has a max forward current of 0.04A and viewing angle of 140°. Ideal for surface mount applications, it offers water clear lens and nominal luminous intensity of 15.0mcd, making it suitable for various visible LED lighting projects.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: WATER CLEAR; Shape: RECTANGULAR;
QTLP650C24TR
Visible LEDs; Lens Type: WATER CLEAR; Viewing Angle: 0 deg; Color At Wavelength: Green/Orange-Red; Maximum Reverse Voltage: 5 V; Minimum Operating Temperature: -40 Cel;
QTLP650C-24.TR
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 4/6.5; Lens Type: WATER CLEAR; Height: 1.1 mm;
Fairchild Semiconductor's QTLP650C24TR LED has a max forward current of 0.03A and water-clear lens type. With a max operating temp of 85°C, it emits green/orange-red light at 140° viewing angle. Ideal for applications requiring low power consumption and vibrant lighting in various environments.
QTLP670C-4.TR
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 25; Lens Type: NONDIFFUSED; Packing Method: TR;
QTLP670C-4TR
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 25.0; Lens Type: WATER CLEAR; Shape: ROUND;
QTLP670C4TR
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 25.0; Lens Type: WATER CLEAR; Viewing Angle: 120 deg;
QTLP650C-4.TR
Fairchild Semiconductor's QTLP650C-4.TR is a 2mm single color LED with peak wavelength of 570nm. It has a max forward current of 0.03A and viewing angle of 140°. Ideal for surface mount applications, it offers water clear lens type and nominal luminous intensity of 10mcd.
QTLP650C-4TR
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: WATER CLEAR; Terminal Pitch: 3.75 mm;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10; Lens Type: WATER CLEAR; Size: 2 mm;
QTLP650C4TR
Fairchild Semiconductor's QTLP650C4TR LED has a max forward current of 30A, peak wavelength of 570nm, and water-clear lens. Ideal for applications requiring green light emission with a viewing angle of 140°. Operates b/w -25°C to 80°C, making it suitable for various lighting needs.
QTLP630C-7TR
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 20.0; Lens Type: WATER CLEAR; Configuration: SINGLE;
QTLP650C-GG
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 35.0; Lens Type: WATER CLEAR; Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved