Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTL-2450Y by Lite-on Technology is a 19mm rectangular LED with 4 separate elements emitting yellow light at a peak wavelength of 585nm. It has a max forward current of 0.02A and operates b/w -35°C to 85°C, making it suitable for various applications requiring single color LEDs with high luminous intensity.
Median Price
$1.535
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
DigiKey
1+ parts
$1.520
100+ parts
$0.811
1k+ parts
$0.654
10k+ parts
$0.563
Mouser Electronics
$1.550
$0.820
$0.642
$0.537
Nova Conductors
$0.514
-
Chip Stock
Vyrian
Prism Electronics
Elcom Components
Sunrise Surplus Inc.
Aranea Global
$0.504
$0.483
Argo Parts USA
$0.499
Continental Prestige Electronics
Netroflash
$0.488
$0.478
Perfect Parts
This configuration allows for individual control of each of the 4 elements, providing flexibility in usage.
The compact size makes it versatile for various applications where space is limited.
With a high maximum forward current, this LED can provide bright illumination while still being energy efficient.
The specific peak wavelength of 585 nm makes this LED ideal for applications requiring yellow light.
Being a single color LED ensures consistency in the light output, making it suitable for uniform lighting applications.
Having 8 terminals allows for more versatile connection options, enhancing the usability of this LED.
With a high maximum operating temperature, this LED can withstand a wide range of environmental conditions.
The low height profile makes this LED suitable for applications with height restrictions.
The rectangular shape provides a uniform illumination pattern, making it ideal for various display applications.
The low minimum operating temperature allows for reliable performance even in cold environments.
The tin/lead terminal finish ensures secure and reliable connections for long-lasting performance.
Even with a low minimum luminous intensity, this LED can still provide sufficient brightness for many applications.
The yellow color output at a specific wavelength makes this LED suitable for signaling and decorative lighting purposes.
The yellow color output is visually appealing and can be used in various creative lighting applications.
The bulk packing method allows for cost-effective purchasing of multiple LEDs for large-scale projects.
The standard terminal pitch of 2.54 mm makes it compatible with commonly available connectors and PCBs.
Having 4 LEDs in the array provides redundancy and ensures continued operation even if one LED fails.
With a nominal luminous intensity of 8.0 mcd, this LED can provide a bright output for many lighting applications.
The radial mounting feature allows for easy installation on PCBs or mounting surfaces, simplifying the assembly process.
The low maximum forward voltage ensures efficient power usage while maintaining bright illumination levels.
Visible LEDs LTL-2450Y attributes and parameters. Explore more Visible LEDs devices from Lite-on Technology
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Minimum Luminous Intensity:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of LEDs in Array:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Sub-Category:
Terminal Finish:
Terminal Pitch:
LTL-2450Y Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Founded in 1975, LITEON embraces being “Best Partner in Opto-Electronic, Eco-Friendly and Intelligent Technologies” as its vision to focus on the development of optoelectronics and key electronic components, and strives to build up competitive edge through resource integration and optimized management. LITEON produces products that are used in a broad range of applications, such as computers, communications, consumer electronics, automotive electronics, LED lighting, cloud computing as well as healthcare. LITEON is a worldwide leading provider of optoelectronics, information technology and storage devices components.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
LM317D2TG
Onsemi
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
National Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
LIS2DH12TR
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
150505M173300
Wuerth Elektronik & Kg
TRIPLE COLOR LED;
OVLLG8C7
Optek Technology
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 670.0; Lens Type: WATER CLEAR; Minimum Operating Temperature: -40 Cel;
QTLP650C-7.TR
Fairchild Semiconductor
Fairchild Semiconductor's QTLP650C-7.TR is a 2mm single color LED with peak wavelength of 660nm. It has a max forward current of 0.04A and viewing angle of 140°. Ideal for surface mount applications, it offers water clear lens and nominal luminous intensity of 15.0mcd, making it suitable for various visible LED lighting projects.
KP-2012SYC
Kingbright Electronic
KP-2012SYC by Kingbright Electronic is a 1.3mm WATER CLEAR LED with a peak wavelength of 590nm and max forward current of 0.03A. Ideal for applications requiring SUPER BRIGHT YELLOW illumination, this SINGLE COLOR LED has a viewing angle of 120° and nominal luminous intensity of 150.0mcd.
HLMP-4000#002
Agilent Technologies
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 2.1/4.2; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
5201
Microprecision Electronics Sa
DUAL COLOR LED;
Qt Optoelectronics
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: WATER CLEAR; Shape: RECTANGULAR;
HSMF-C118
Broadcom
HSMF-C118 by Broadcom is a 2.7mm COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 637nm, 523nm, and 468nm. It has a max forward current of 0.02A and viewing angle of 125°. Ideal for applications requiring diffused lighting such as signage, displays, and indicators due to its red/green/blue color output.
LTST-C191KRKT-5A
Lite-on Technology
Visible LEDs;
KP-1608SURC
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 200.0; Lens Type: WATER CLEAR; Minimum Operating Temperature: -40 Cel;
17-570231
Eao
SINGLE COLOR LED;
APT1608CGCK
APT1608CGCK by Kingbright Electronic is a 1.2mm GREEN LED with 0.03A forward current, peak wavelength of 574nm, and 120cd luminous intensity. Ideal for surface mount applications in products requiring green-yellow light emission with a viewing angle of 120°.
KPT-1608SURCK
KPT-1608SURCK by Kingbright Electronic is a 1.2mm SINGLE COLOR LED with HYPER RED color, peak wavelength of 650nm, and max forward current of 0.03A. Ideal for surface mount applications, it offers a viewing angle of 120° and nominal luminous intensity of 220.0mcd.
LTST-C170TBKT
LTST-C170TBKT by Lite-on Technology is a 1.4mm BLUE LED with WATER CLEAR lens, peak wavelength of 468nm, and max forward current of 0.02A. Ideal for surface mount applications in electronics due to its compact size, high luminous intensity of 130cd, and wide viewing angle of 130°.
BR1112H-TR
Stanley Electric
Stanley Electric's BR1112H-TR is a 1.2mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.025A. Ideal for surface mount applications, it offers a viewing angle of 150° and nominal luminous intensity of 11.7mcd, making it suitable for various visible LED lighting projects.
QS83XXW12
Apem Components
HSMA-C265
Visible LEDs; Lens Type: CLEAR; Terminal Finish: Tin/Lead (Sn/Pb); Viewing Angle: 150 deg; Maximum Reverse Voltage: 5 V; Maximum Operating Temperature: 85 Cel;
SSL-LX3044AD-12V
Lumex
SSL-LX3044AD-12V by Lumex is a 3mm single color LED with peak wavelength of 605nm and 15.0mcd luminous intensity. Ideal for applications requiring amber light, it has a diffused lens, operates at -40 to 85°C, and features radial mounting.
APT1608SURCK-AMT
Kingbright Electronic's APT1608SURCK-AMT is a 1.2mm SINGLE COLOR LED with 0.03A forward current, emitting HYPER RED light at 650nm wavelength. Ideal for surface mount applications, it offers a viewing angle of 120° and luminous intensity of 260.0mcd, operating b/w -40°C to 100°C temperatures.
HLMP-1790-A00A2
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.3; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTL-293SJW
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 90/40; Lens Type: DIFFUSED WHITE; Terminal Finish: Tin/Lead (Sn/Pb);
LTL29S-N2Q1-25-Z
Osram Opto Semiconductors
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 62.75; Lens Type: COLORLESS DIFFUSED; Height: .65 mm;
LTL29S-P2R1-25-Z
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 98.0; Lens Type: COLORLESS DIFFUSED; No. of Functions: 1;
LTL-2450Y
Ledtronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); No. of LEDs in Array: 4; Packing Method: BULK; Configuration: SEPARATE, 4 ELEMENTS;
LTL29S-N1R2-25
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 420.0; Lens Type: COLORLESS DIFFUSED; Terminal Finish: TIN;
LTL29S-N2Q1-25
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 250.0; Lens Type: COLORLESS DIFFUSED; Terminal Finish: TIN;
LTL29S-P2R1-25
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 400.0; Lens Type: COLORLESS DIFFUSED; Terminal Finish: TIN;
LTL-2700Y
SINGLE COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 8; Nominal Luminous Intensity (mcd): 4.2; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 2;
LTL-2720Y
SINGLE COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 16; Nominal Luminous Intensity (mcd): 4.2; Terminal Finish: Tin/Lead (Sn/Pb); Color: YELLOW;
LTL-2350HR
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 8; Nominal Luminous Intensity (mcd): 8.0; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: SEPARATE, 4 ELEMENTS;
LTL-2400Y
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 4.2; Terminal Finish: Tin/Lead (Sn/Pb); Height: 6.15 mm;
LTL-2550G
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 8; Nominal Luminous Intensity (mcd): 8.0; Terminal Finish: Tin/Lead (Sn/Pb); Color: GREEN;
LTL-2755Y
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 8.0; Terminal Finish: Tin/Lead (Sn/Pb); Shape: SQUARE;
LTL-2785Y
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 16; Nominal Luminous Intensity (mcd): 16.0; Terminal Finish: Pure Tin (Sn); Terminal Pitch: 2.54 mm;
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 8.2; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 585;
LTL-23251AL
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1.7; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved