Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Dialight's 598-8250-107F is a 2mm WATER CLEAR LED with 0.025A max forward current, emitting YELLOW light at 130.0mcd luminous intensity. Ideal for surface mount applications in electronics, offering a wide 140° viewing angle and operating temperature range of -30 to 85°C.
Median Price
$0.111
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Arrow
1+ parts
$0.090
100+ parts
$0.047
1k+ parts
-
10k+ parts
DigiKey
$0.240
$0.114
$0.084
$0.078
Mouser Electronics
$0.115
$0.085
$0.061
Distrelec
$0.322
$0.172
$0.118
Master Electronics
$0.067
TTI Europe
$0.065
Verical
$0.079
Chip1Stop
Element14
$0.132
Nova Conductors
$0.109
Electro Sonic
$0.056
Vyrian
Inventory MP
Bristol Electronics
Speed Components Ltd
VNN
Rapid Electronics
$0.063
IBS Electronics
Connector Distribution Corp
Right Parts Inc.
Ampacity Inc.
$0.044
Semicontronic
$0.043
Corohmni
$0.094
Advanced Electronics
$0.097
$0.092
Argo Parts USA
$0.095
Netroflash
Aztec Data Supply Inc.
$0.210
Continental Prestige Electronics
$0.319
$0.105
$0.042
Perfect Parts
Assy Fe
Authorized Procurement Solutions
Provides simplicity in design and easy integration into circuits.
Compact size allows for flexibility in placement within electronic devices.
Ensures efficient power consumption and long-term reliability.
Offers a high level of brightness and clarity for improved visibility.
Ensures consistent color output for a uniform lighting effect.
Simplifies installation and connection to circuitry.
Suitable for a wide range of operating conditions.
Low profile design for space-saving installations.
Allows for a more focused beam of light in specific applications.
Designed to withstand cold temperatures for outdoor use.
Provides corrosion resistance and reliable connections.
Offers a vibrant and eye-catching color option for various lighting projects.
Provides consistent and uniform color output for visual appeal.
Convenient packaging for easy handling and storage.
Ensures protection against reverse polarity and voltage spikes.
Allows for easy soldering and secure connection to PCBs.
Provides a wide angle of light dispersion for enhanced visibility.
Offers bright and clear illumination for various applications.
Easy installation on circuit boards for streamlined production processes.
Efficient voltage usage for optimal performance and energy savings.
Visible LEDs 598-8250-107F attributes and parameters. Explore more Visible LEDs devices from Dialight
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Maximum Reverse Voltage:
Shape:
Size:
Sub-Category:
Terminal Finish:
Terminal Pitch:
Viewing Angle:
598-8250-107F Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Dialight is the world leader in LED industrial lighting technology with millions of LED fixtures installed worldwide. Our story began in 1938 in Brooklyn, NY, where we produced instrument panel lights for aircraft. In 1971, just one year after the introduction of the LED, we launched our first LED product. Since then, we have revolutionized the use of LEDs and ONLY LEDs, to provide superior lighting for traffic control, indicators, structural towers and industrial work sites around the world. We see a world where heavy industry is transformed to be safer, more productive, and environmentally friendly through illumination. We enable industrial customers operating in demanding environments to reduce their energy costs, maintenance costs, and carbon footprint while maximizing the safety and productivity of their facilities. From our signature High Bay line to our versatile Linear fixtures, Dialight offers the largest selection of rugged, cutting edge products to suit virtually any industrial application. With over 50 years of industrial LED lighting experience and the largest installed base in the world, we are here to help you identify a lighting solution that meets your specific needs.
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
1N4148
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
MBR0530T1G
Onsemi
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
ERJ2RKF1002X
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
QTLP650C-24.TR
Qt Optoelectronics
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 4/6.5; Lens Type: WATER CLEAR; Height: 1.1 mm;
LWP4SG-V2AB-JKPL-1
Osram Opto Semiconductors
Osram Opto Semiconductors' LWP4SG-V2AB-JKPL-1 is a 1.6mm single color LED with diffused lens, emitting white light at 1350.0mcd intensity. It has a max forward current of 0.02A and operates b/w -40 to 100°C, making it ideal for surface mount applications requiring high luminous output in a compact size.
SMLE12BC7TT86
ROHM
ROHM's SMLE12BC7TT86 is a 1.2mm SINGLE COLOR LED with peak wavelength of 468nm, forward current of 0.02A, and luminous intensity of 22.0mcd. Ideal for applications requiring blue light emission in compact electronic devices due to its small size and surface mounting feature.
150141BS73100
Wuerth Elektronik & Kg
150141BS73100 by Wurth Elektronik is a 2.4mm BLUE LED with peak wavelength of 465nm, forward current of 0.03A, and luminous intensity of 270.0mcd. Ideal for surface mount applications in electronics, offering a wide viewing angle of 120° and operating temperatures from -40°C to 85°C.
SML-A12DTT86
ROHM's SML-A12DTT86 is a 1.2mm SINGLE COLOR LED with peak wavelength of 611nm, forward current of 0.03A, and luminous intensity of 100.0mcd. Ideal for surface mount applications in visible LEDs category, especially in devices requiring amber/orange light emission at temperatures ranging from -40 to 85°C.
KP-2012SYCK
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 120.0; Lens Type: WATER CLEAR; Maximum Operating Temperature: 85 Cel;
PKB-35-F35
Laser Components
SINGLE COLOR LED;
HLMP-1700
Agilent Technologies
Agilent Technologies' HLMP-1700 is a 3mm single color LED with a peak wavelength of 635nm and a max forward current of 0.007A. It is commonly used for high efficiency red lighting applications.
QTLP650C7TR
Everlight Electronics
Visible LEDs; Lens Type: WATER CLEAR; Peak Wavelength (nm): 660; Maximum Operating Temperature: 80 Cel; Color At Wavelength: Red; Maximum Forward Current: 40 A;
586-2406-205F
Dialight
Dialight's 586-2406-205F is a single color LED with a tinted lens, 10.7mm size, and T-3 1/4 code. Operating from -30 to 85°C, it emits white light at 412.0mcd intensity. Ideal for panel mounting applications due to its round shape and bulk packaging.
HLMP-1719-A00A2
Broadcom
HLMP-1719-A00A2 by Broadcom is a 3mm single color LED with peak wavelength of 583nm. With max forward current of 0.007A, it emits yellow light at 2.1mcd luminous intensity. Ideal for applications requiring a round, tinted diffused lens in bulk packaging.
SSL-LXA3025IGC-TR
Lumex
SSL-LXA3025IGC-TR by Lumex is a 2.8mm DUAL COLOR LED with 1 function, peak wavelengths of 635/565nm, and clear lens. Ideal for surface mount applications, it has a max forward current of 0.03A and operates b/w -40 to 85°C. With red/green colors and a viewing angle of 130°, it offers luminous intensity of 12.0/20.0mcd for versatile lighting solutions.
553-0212F
Dialight's 553-0212F is a dual color LED array with separate, 2-element configuration. It has peak wavelengths of 650nm for green and 563nm for red, ideal for status indicators in electronics. With a max forward current of 0.007A and operating temperatures from -55°C to 100°C, it offers reliable performance in various applications.
LST67F-T2V2-1-1-20-R18-Z
Osram Opto Semiconductors' LST67F-T2V2-1-1-20-R18-Z is a 2.4mm single color LED with peak wavelength of 645nm and max forward current of 0.05A. Ideal for applications requiring super red light emission, such as indicator lights in automotive or electronic devices.
HLMP-3507-EF000
HLMP-3507-EF000 by Broadcom is a 5mm SINGLE COLOR LED with peak wavelength of 565nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring high performance green light emission in bulk packaging.
HSMH-C170
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 17; Lens Type: DIFFUSED; Terminal Finish: Gold (Au);
LSQ976
LSQ976 by Osram Opto Semiconductors is a 1mm SINGLE COLOR LED with peak wavelength of 645nm. It has a max forward current of 0.025A and viewing angle of 160°. Ideal for applications requiring super red light emission, such as indicator lights in automotive or consumer electronics.
XHP35B-00-0000-0D0HC430E
Wolfspeed
597-3021-507F
Dialight's 597-3021-507F is a single color LED with peak wavelength of 650nm, forward current of 0.025A, and forward voltage of 2.8V. Ideal for surface mount applications, it emits red light with a viewing angle of 110° and luminous intensity of 6.3mcd.
LSA676-P2S1-1-Z
LSA676-P2S1-1-Z by Osram Opto Semiconductors is a 2.4mm single color LED with peak wavelength of 645nm, ideal for applications requiring super red light emission. With a max forward current of 0.03A and viewing angle of 120°, it's suitable for surface mount installations in various electronic devices. Operating temperature ranges from -40 to 100 °C, making it versatile for different environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
598-8010-107F
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 60.0; Lens Type: WATER CLEAR; Terminal Finish: Gold/Nickel (Au/Ni);
598-8070-107F
Dialight's 598-8070-107F is a single color LED with water clear lens, 1.1mm size, and 0.025A max forward current. Ideal for surface mount applications, it has a viewing angle of 140° and nominal luminous intensity of 20.0 mcd.
598-8170-107F
Dialight's 598-8170-107F is a single color LED with a water-clear lens, emitting green light. With a size of 1.2mm and max forward current of 0.025A, it's ideal for surface mount applications requiring a viewing angle of 140° and luminous intensity of 20.0mcd.
598-8091-107F
Dialight's 598-8091-107F is a single color LED with blue light at 140° viewing angle. It has a size of 1.1 mm and operates b/w -40 to 100 °C, ideal for surface mount applications requiring max forward current of 0.02 A.
598-8110-107F
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 40.0; Lens Type: WATER CLEAR; Terminal Finish: Nickel/Gold (Ni/Au);
598-8081-107F
Dialight's 598-8081-107F is a single color LED with water clear lens, emitting green light. It has a size of 1.1mm and max forward current of 0.02A. Ideal for surface mount applications, with viewing angle of 140° and luminous intensity of 340mcd.
598-8140-107F
Dialight's 598-8140-107F is a single color LED with water clear lens, emitting yellow light. It has a size of 1.2mm and max forward current of 0.025A, suitable for surface mount applications in various electronic devices due to its compact size and high luminous intensity of 130mcd.
598-8050-107F
Dialight's 598-8050-107F is a single color LED with water clear lens, emitting yellow light. It has a forward voltage of 2.4V and max forward current of 0.025A, suitable for surface mount applications in various electronic devices. Operating temperature ranges from -40 to 100°C, making it ideal for industrial and automotive lighting solutions.
598-8191-107F
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 140.0; Lens Type: WATER CLEAR; Terminal Finish: Gold/Nickel (Au/Ni);
598-8210-107F
Dialight's 598-8210-107F is a 2mm single color LED with max forward current of 0.025A, water clear lens, and 140° viewing angle. Ideal for surface mount applications, it operates b/w -30 to 85 °C, emitting red light with luminous intensity of 55.0 mcd.
598-8020-107F
Dialight's 598-8020-107F is a single color LED with a max forward current of 0.025 A and a viewing angle of 140°. It is commonly used in surface mount applications for its red-orange color and water clear lens type.
598-8291-107F
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 140.0; Lens Type: WATER CLEAR; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
598-8510-207F
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 60.0/40.0; Lens Type: WATER CLEAR; Terminal Finish: Nickel/Gold (Ni/Au);
598-8181-107F
Dialight's 598-8181-107F is a single color LED with water clear lens, 1.2mm size, and 0.025A max forward current. Ideal for surface mount applications, it has a viewing angle of 140° and nominal luminous intensity of 300.0 mcd. Operating temp range: -30 to 85 °C.
598-8560-207F
The Dialight 598-8560-207F is a 2mm dual color LED with separate configuration and water clear lens. It has a max forward current of 0.03A and can operate at temperatures ranging from -30°C to 85°C. This LED is suitable for surface mount applications requiring red/yellow illumination with a viewing angle of 160°.
598-8270-107F
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 20.0; Lens Type: WATER CLEAR; Terminal Finish: Nickel/Gold (Ni/Au);
598-8710-307F
Dialight's 598-8710-307F is a COMMON ANODE, 3 ELEMENTS LED with size 1.6mm and max forward current of 0.02A. Ideal for applications requiring TRIPLE COLOR illumination with RED/GREEN/BLUE colors, it operates b/w -40 to 100 °C and has a viewing angle of 140°.
598-8281-107F
Dialight's 598-8281-107F is a 2mm single color LED with max forward current of 0.025A. With water clear lens and green color, it has viewing angle of 140°. Ideal for surface mount applications, operating temp range from -30 to 85 °C.
598-8040-107F
The Dialight 598-8040-107F is a single color LED with a size of 1.1 mm and a max forward current of 0.025 A. It is commonly used in surface mount applications for its water clear lens and yellow color.
598-8610-307F
Dialight's 598-8610-307F is a COMMON ANODE, TRIPLE COLOR LED with 0.02A max current. It features RED/GREEN/BLUE colors, WATER CLEAR lens, and 140° viewing angle. Ideal for surface mount applications requiring vibrant RGB illumination in a compact form factor.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved