Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Dialight's 598-8710-307F is a COMMON ANODE, 3 ELEMENTS LED with size 1.6mm and max forward current of 0.02A. Ideal for applications requiring TRIPLE COLOR illumination with RED/GREEN/BLUE colors, it operates b/w -40 to 100 °C and has a viewing angle of 140°.
Median Price
$1.092
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
100+ parts
$1.037
1k+ parts
10k+ parts
-
Arrow
$2.178
$1.101
$0.890
Chip1Stop
$2.244
$1.139
$1.050
Mouser Electronics
$2.380
$1.140
$0.998
$0.930
Element14
$174.310
$95.080
$89.340
Future Electronics
$0.895
TTI Europe
$0.854
Master Electronics
$0.886
$0.871
Verical
$1.042
Nova Conductors
$1.085
Sensible Micro Corp
IBS Electronics
$1.325
$1.149
NAC Semi
$1.790
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Prism Electronics
Vyrian
Electro Sonic
$1.005
$0.908
Chip Stock
Lantek
Component Sense
R&J Components
VNN
Holdelec - ElecDif-Pro
SPM Sales
Inventory MP
Bristol Electronics
Aztec Data Supply Inc.
$0.438
Semicontronic
$0.710
$0.692
$0.689
Corohmni
$1.060
Aranea Global
$1.063
$1.021
Argo Parts USA
Advanced Electronics
Modulus Dynamics
$1.136
$1.125
$1.091
Ampacity Inc.
$1.540
Continental Prestige Electronics
$1.670
$0.828
Perfect Parts
GreenTree Electronics
Speed Components Ltd (Excess)
Infinite Electronics LLP (Excess)
Robosynatics
$0.654
Lucentia Tech
Common anode configuration allows for easier circuit design and integration with other components.
Compact size makes it suitable for applications where space is limited.
Low forward current helps in minimizing power consumption and heat generation.
Water clear lens provides optimal brightness and visibility.
Can emit multiple colors, offering versatility in lighting design.
High operating temperature range ensures reliability in various environments.
Wide operating temperature range allows for use in extreme conditions.
Gold terminal finish ensures reliable electrical contacts and corrosion resistance.
Capable of emitting various colors for versatile lighting applications.
Suitable packaging for easy handling and storage.
Wide viewing angle ensures visibility from different directions.
High luminous intensity for bright and vibrant lighting output.
Surface mount design simplifies installation and mounting process.
Low forward voltage drop helps in efficient operation and extends battery life.
Visible LEDs 598-8710-307F attributes and parameters. Explore more Visible LEDs devices from Dialight
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Maximum Reverse Voltage:
Shape:
Size:
Sub-Category:
Terminal Finish:
Terminal Pitch:
Viewing Angle:
598-8710-307F Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Assembly/Origin - Mult DEV COO RevB 12/Jan/2024
Dialight is the world leader in LED industrial lighting technology with millions of LED fixtures installed worldwide. Our story began in 1938 in Brooklyn, NY, where we produced instrument panel lights for aircraft. In 1971, just one year after the introduction of the LED, we launched our first LED product. Since then, we have revolutionized the use of LEDs and ONLY LEDs, to provide superior lighting for traffic control, indicators, structural towers and industrial work sites around the world. We see a world where heavy industry is transformed to be safer, more productive, and environmentally friendly through illumination. We enable industrial customers operating in demanding environments to reduce their energy costs, maintenance costs, and carbon footprint while maximizing the safety and productivity of their facilities. From our signature High Bay line to our versatile Linear fixtures, Dialight offers the largest selection of rugged, cutting edge products to suit virtually any industrial application. With over 50 years of industrial LED lighting experience and the largest installed base in the world, we are here to help you identify a lighting solution that meets your specific needs.
1N4148
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
ULN2803A
Texas Instruments
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
LM358M
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84-7-F
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
New England Semiconductor
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
569-0112-300F
Dialight
Dialight's 569-0112-300F is a dual color LED array with separate, 2-element configuration. Featuring peak wavelength of 585nm and viewing angle of 60°, it is ideal for applications requiring yellow/green light emission. With max forward current of 0.03A and nominal luminous intensity of 10.0mcd, this 3mm LED is suitable for radial mounting in various electronic devices.
OVLAW4CB7
Tt Electronics Plc
OVLAW4CB7 by Tt Electronics Plc is a 3.05mm SINGLE COLOR LED with WATER CLEAR lens, WHITE color, and 3500.0mcd luminous intensity. It operates b/w -40 to 85°C, has a forward current of 0.02A, and a viewing angle of 45°. Ideal for applications requiring high brightness in compact spaces like indicator lights or displays.
HLMP4740
Three-five Systems
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green; Maximum Forward Voltage: 2.2 V; Maximum Forward Current: .007 A;
HLMP-3507-D0001
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6.15; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
KRTBLSLPS1.32-VUVX-EQ+BTBV-D8+TWTZ-L1-B
Osram Opto Semiconductors
Osram Opto Semiconductors' KRTBLSLPS1.32-VUVX-EQ+BTBV-D8+TWTZ-L1-B is a triple color LED with peak wavelengths of 634nm, 526nm, and 462nm. It has a max forward current of 0.03A and nominal luminous intensities of 1025mcd, 2351mcd, and 457.5mcd for red, true green, and blue colors respectively. This rectangular LED is suitable for applications requiring separate elements in a compact size with diffused lens type.
APT1608SRCPRV
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Terminal Pitch: 1.65 mm;
HLMP-1790-A0002
Broadcom
Broadcom's HLMP-1790-A0002 is a 3mm single color LED with peak wavelength of 565nm. With max forward current of 0.007A, it emits green light at 2.3mcd luminous intensity. Ideal for applications requiring radial mounting and a viewing angle of 50°.
LSR976-NR-1-0-20-R18
LSR976-NR-1-0-20-R18 by Osram Opto Semiconductors is a 1.4mm single color LED with peak wavelength of 645nm and max forward current of 0.025A. Ideal for applications requiring super red light emission, it has a viewing angle of 160° and operates b/w -30°C to 85°C temperatures.
MLCAWT-A1-0000-000XE5
Wolfspeed
Wolfspeed's MLCAWT-A1-0000-000XE5 is a single color LED with max forward current of 0.35A and height of 1.2mm. Ideal for applications requiring white light at 120cd luminous intensity, it operates up to 150°C, with max forward voltage of 3.4V and reverse voltage of 5V.
150141YS73100
Wuerth Elektronik & Kg
150141YS73100 by Wurth Elektronik is a WATER CLEAR YELLOW LED with a peak wavelength of 592nm, forward current of 0.03A, and luminous intensity of 300.0mcd. Ideal for applications requiring a single color LED with surface mounting feature and 120° viewing angle.
APT2012SRCPRV
Kingbright Electronic
APT2012SRCPRV by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER BRIGHT RED illumination, such as indicator lights in electronic devices due to its water clear lens and surface mounting feature.
IN-PI55TATPRPGPB
Inolux
IN-PI55TATPRPGPB by Inolux is a TRIPLE COLOR LED with max forward current of 0.012A, suitable for surface mount applications. With red/green/blue colors and nominal luminous intensity up to 1850mcd, it operates b/w -45°C to 85°C making it ideal for various visible LED lighting projects.
XHP35B-00-0000-0D0BE20E3
Cree Led
SINGLE COLOR LED;
HLMP-1700-B00A1
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.1; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HSMG-C191
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
KP-1608SGC
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: WATER CLEAR; Maximum Operating Temperature: 85 Cel;
HLMP-3301
Quality Technologies
SINGLE COLOR LED; Shape: ROUND; No. of Functions: 1; Size: 5 mm; Maximum Forward Current: .03 A; Color: HIGH EFFICIENCY RED;
HLMP1719
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Yellow; Maximum Forward Voltage: 2.7 V; Maximum Operating Temperature: 100 Cel;
SML-LX0603IW-TR
Lumex
The Lumex SML-LX0603IW-TR is a 1mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.03A and viewing angle of 160°. Ideal for surface mount applications, this diffused milky white LED is commonly used in visible light displays and indicators due to its red color and nominal luminous intensity of 14.0mcd.
HLMP1700
Vch
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Viewing Angle: 50 deg; JESD-609 Code: e0; Maximum Forward Voltage: 2.2 V;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
598-8010-107F
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 60.0; Lens Type: WATER CLEAR; Terminal Finish: Gold/Nickel (Au/Ni);
598-8070-107F
Dialight's 598-8070-107F is a single color LED with water clear lens, 1.1mm size, and 0.025A max forward current. Ideal for surface mount applications, it has a viewing angle of 140° and nominal luminous intensity of 20.0 mcd.
598-8170-107F
Dialight's 598-8170-107F is a single color LED with a water-clear lens, emitting green light. With a size of 1.2mm and max forward current of 0.025A, it's ideal for surface mount applications requiring a viewing angle of 140° and luminous intensity of 20.0mcd.
598-8091-107F
Dialight's 598-8091-107F is a single color LED with blue light at 140° viewing angle. It has a size of 1.1 mm and operates b/w -40 to 100 °C, ideal for surface mount applications requiring max forward current of 0.02 A.
598-8110-107F
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 40.0; Lens Type: WATER CLEAR; Terminal Finish: Nickel/Gold (Ni/Au);
598-8081-107F
Dialight's 598-8081-107F is a single color LED with water clear lens, emitting green light. It has a size of 1.1mm and max forward current of 0.02A. Ideal for surface mount applications, with viewing angle of 140° and luminous intensity of 340mcd.
598-8140-107F
Dialight's 598-8140-107F is a single color LED with water clear lens, emitting yellow light. It has a size of 1.2mm and max forward current of 0.025A, suitable for surface mount applications in various electronic devices due to its compact size and high luminous intensity of 130mcd.
598-8050-107F
Dialight's 598-8050-107F is a single color LED with water clear lens, emitting yellow light. It has a forward voltage of 2.4V and max forward current of 0.025A, suitable for surface mount applications in various electronic devices. Operating temperature ranges from -40 to 100°C, making it ideal for industrial and automotive lighting solutions.
598-8191-107F
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 140.0; Lens Type: WATER CLEAR; Terminal Finish: Gold/Nickel (Au/Ni);
598-8210-107F
Dialight's 598-8210-107F is a 2mm single color LED with max forward current of 0.025A, water clear lens, and 140° viewing angle. Ideal for surface mount applications, it operates b/w -30 to 85 °C, emitting red light with luminous intensity of 55.0 mcd.
598-8020-107F
Dialight's 598-8020-107F is a single color LED with a max forward current of 0.025 A and a viewing angle of 140°. It is commonly used in surface mount applications for its red-orange color and water clear lens type.
598-8291-107F
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 140.0; Lens Type: WATER CLEAR; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
598-8510-207F
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 60.0/40.0; Lens Type: WATER CLEAR; Terminal Finish: Nickel/Gold (Ni/Au);
598-8181-107F
Dialight's 598-8181-107F is a single color LED with water clear lens, 1.2mm size, and 0.025A max forward current. Ideal for surface mount applications, it has a viewing angle of 140° and nominal luminous intensity of 300.0 mcd. Operating temp range: -30 to 85 °C.
598-8560-207F
The Dialight 598-8560-207F is a 2mm dual color LED with separate configuration and water clear lens. It has a max forward current of 0.03A and can operate at temperatures ranging from -30°C to 85°C. This LED is suitable for surface mount applications requiring red/yellow illumination with a viewing angle of 160°.
598-8270-107F
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 20.0; Lens Type: WATER CLEAR; Terminal Finish: Nickel/Gold (Ni/Au);
598-8281-107F
Dialight's 598-8281-107F is a 2mm single color LED with max forward current of 0.025A. With water clear lens and green color, it has viewing angle of 140°. Ideal for surface mount applications, operating temp range from -30 to 85 °C.
598-8040-107F
The Dialight 598-8040-107F is a single color LED with a size of 1.1 mm and a max forward current of 0.025 A. It is commonly used in surface mount applications for its water clear lens and yellow color.
598-8610-307F
Dialight's 598-8610-307F is a COMMON ANODE, TRIPLE COLOR LED with 0.02A max current. It features RED/GREEN/BLUE colors, WATER CLEAR lens, and 140° viewing angle. Ideal for surface mount applications requiring vibrant RGB illumination in a compact form factor.
598-8730-302F
TRIPLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 120.0/220.0/90.0; Lens Type: WATER CLEAR; Terminal Finish: Nickel/Gold (Ni/Au);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved