Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTL-2400Y by Lite-on Technology is a 2-element separate LED with peak wavelength of 585nm. It has a max forward current of 0.02A and nominal luminous intensity of 4.2mcd, making it ideal for applications requiring yellow light emission in compact spaces.
Median Price
$1.260
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.644
1k+ parts
$0.514
10k+ parts
$0.446
DigiKey
$1.310
$0.687
$0.550
$0.470
Future Electronics
-
$0.410
$0.385
$0.375
Nova Conductors
$0.428
Chip Stock
Sunrise Surplus Inc.
ComSIT Distribution GmbH
Vyrian
IBS Electronics
$0.533
$0.505
$0.491
Prism Electronics
ABC Electronics Ltd.
Component Electronics Inc.
Aranea Global
$0.420
$0.403
Component Stockers USA
$1.040
$0.520
Authorized Procurement Solutions
Perfect Parts
Infinite Electronics LLP (Excess)
Glotronic Ltd.
Netroflash
$0.407
$0.398
Having separate 2 elements allows for better control of each individual LED, resulting in more precise lighting applications.
Compact size makes this LED suitable for various lighting designs where space is a constraint.
With a maximum forward current of 0.02 A, this LED can offer bright illumination while maintaining energy efficiency.
Peak wavelength of 585nm ensures a consistent and specific yellow color output.
Being a single color LED simplifies design considerations and ensures uniformity in the emitted light.
Having 4 terminals enables secure and stable connections, reducing the risk of potential electrical issues.
High maximum operating temperature of 85°C allows for reliable performance in various environmental conditions.
Low height profile makes this LED suitable for applications where space is limited.
Rectangular shape offers versatility in mounting options and allows for efficient placement in different lighting fixtures.
Wide operating temperature range from -35°C to 85°C ensures functionality in both extreme cold and hot environments.
Tin/lead terminal finish provides good solderability and conductivity for reliable electrical connections.
Even at low luminous intensity, this LED can still provide noticeable light output for various applications.
Yellow color output at 585nm wavelength offers a vibrant and eye-catching lighting solution.
Bulk packing method is cost-effective and ideal for high-volume production or stocking purposes.
Standard terminal pitch of 2.54mm makes this LED compatible with commonly used PCB designs.
Having 2 LEDs in an array provides redundancy and higher brightness output for enhanced lighting performance.
Nominal luminous intensity of 4.2mcd ensures a sufficiently bright light output for various lighting applications.
Radial mounting feature simplifies installation and allows for omnidirectional light emission.
Maximum forward voltage of 2.8V ensures efficient power consumption while providing adequate brightness levels.
Visible LEDs LTL-2400Y attributes and parameters. Explore more Visible LEDs devices from Lite-on Technology
Additional Features:
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Minimum Luminous Intensity:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of LEDs in Array:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Sub-Category:
Terminal Finish:
Terminal Pitch:
LTL-2400Y Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Founded in 1975, LITEON embraces being “Best Partner in Opto-Electronic, Eco-Friendly and Intelligent Technologies” as its vision to focus on the development of optoelectronics and key electronic components, and strives to build up competitive edge through resource integration and optimized management. LITEON produces products that are used in a broad range of applications, such as computers, communications, consumer electronics, automotive electronics, LED lighting, cloud computing as well as healthcare. LITEON is a worldwide leading provider of optoelectronics, information technology and storage devices components.
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
M39029/56-351
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
EU2B-YS3203F
Idec
ROTARY SWITCH;
Temic Semiconductors
MLCAWT-A1-0000-000WE7
Cree Led
SINGLE COLOR LED; Maximum Forward Voltage: 3.4 V; Maximum Reverse Voltage: 5 V; Color At Wavelength: White; Height: 1.2 mm; Maximum Forward Current: .35 A;
XHP35B-00-0000-0D0BE20E3
Wolfspeed
SINGLE COLOR LED;
APT1608ZGCK
Kingbright Electronic
Kingbright Electronic's APT1608ZGCK is a 1.2mm SINGLE COLOR LED with peak wavelength of 515nm, max forward current of 0.025A, and luminous intensity of 350mcd. Ideal for surface mount applications in electronics, offering water clear lens and green light emission with wide 120° viewing angle.
SML-D12P8WT86CK
ROHM
Visible LEDs; Terminal Finish: GOLD OVER NICKEL; JESD-609 Code: e4;
TLHK5800
Vishay Intertechnology
Vishay Intertechnology's TLHK5800 is a 5mm red LED with peak wavelength of 643nm, forward current of 0.03A, and luminous intensity of 2500mcd. Ideal for applications requiring single color illumination in environments ranging from -40°C to 100°C.
598-8610-307F
Dialight
Dialight's 598-8610-307F is a COMMON ANODE, TRIPLE COLOR LED with 0.02A max current. It features RED/GREEN/BLUE colors, WATER CLEAR lens, and 140° viewing angle. Ideal for surface mount applications requiring vibrant RGB illumination in a compact form factor.
HLMP-4740
Everlight Electronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 3.0; Lens Type: TINTED DIFFUSED; Maximum Forward Current: .0075 A;
156125VS75000
Wuerth Elektronik & Kg
156125VS75000 by Wurth Elektronik is a 1.2mm SINGLE COLOR LED with peak wavelength of 575nm, max forward current of 0.02A, and bright green color. Ideal for surface mount applications in electronics, offering a viewing angle of 140° and nominal luminous intensity of 45.0mcd.
KP-2012MGC
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 70.0; Lens Type: WATER CLEAR; Terminal Finish: Gold (Au);
SSL-LX3059IGW-CA
Lumex
SSL-LX3059IGW-CA by Lumex is a 3mm dual color LED with common anode configuration. It has a max forward current of 0.03A and peak wavelengths of 635nm/565nm. Ideal for applications requiring diffused milky white light output, such as indicator lights in electronic devices.
HLMP-4700
Quality Technologies
SINGLE COLOR LED; Maximum Forward Current: .0075 A; Maximum Operating Temperature: 100 Cel; T-code: T-1 3/4; Color: HIGH EFFICIENCY RED; Minimum Operating Temperature: -55 Cel;
XHP50B-00-0000-0D0BJ40E3
HSMF-C118
Agilent Technologies
TRIPLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 90.0/120.0/40.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
LTST-S270KRKT
Lite-on Technology
LTST-S270KRKT by Lite-on Technology is a 1.2mm WATER CLEAR LED with peak wavelength of 639nm and max forward current of 0.03A. Ideal for applications requiring a red light source, such as indicator lights in electronic devices due to its high luminous intensity of 130cd at 2.4V forward voltage.
1312
Wilbrecht Electronics
LGT670-K1L2-1-Z
Osram Opto Semiconductors
Osram Opto Semiconductors LGT670-K1L2-1-Z is a 2.4mm SINGLE COLOR LED with peak wavelength of 572nm, forward current of 0.03A, and luminous intensity of 12.55mcd. Ideal for surface mount applications in green light displays due to its colorless clear lens and wide 120° viewing angle.
OVS-0603
SPC TECHNOLOGY/ MULTICOMP
OVS-0603 LED by Spc Technology/Multicomp is a 1mm blue LED with max forward current of 0.03A and viewing angle of 130°. Ideal for surface mount applications, it operates b/w -30 to 85 °C, emitting a luminous intensity of 100.0 mcd.
XHP35B-00-0000-0D0UB230G
KP-2012SURC
KP-2012SURC by Kingbright Electronic is a 1.3mm rectangular, single color LED with a peak wavelength of 640nm and a max forward current of 0.03A. It is commonly used in applications that require a hyper red light source, such as signage, displays, and indicator lights.
TLUV5300
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 2.5; Lens Type: UNTINTED DIFFUSED; T-code: T-1 3/4;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTL-2685HR
LTL-2685HR by Lite-on Technology is a high-efficiency red LED with 8 separate elements, peak wavelength of 635nm, and max forward current of 0.025A. Ideal for applications requiring bright red light emission in compact spaces, such as indicator lights or displays.
LTL-2820G
LTL-2820G by Lite-on Technology is a single color LED array with 8 separate elements. It has a peak wavelength of 565nm and max forward current of 0.025A. Ideal for applications requiring green light emission, such as indicator lights in electronic devices.
LTL-2785Y
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 16; Nominal Luminous Intensity (mcd): 16.0; Terminal Finish: Pure Tin (Sn); Terminal Pitch: 2.54 mm;
LTL-293SJW
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 90/40; Lens Type: DIFFUSED WHITE; Terminal Finish: Tin/Lead (Sn/Pb);
LTL-2450Y
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 8; Nominal Luminous Intensity (mcd): 8.0; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 2.8 V;
LTL-2885G
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 16; Nominal Luminous Intensity (mcd): 16.0; Terminal Finish: Pure Tin (Sn); Color: GREEN;
LTL-2550G
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 8; Nominal Luminous Intensity (mcd): 8.0; Terminal Finish: Tin/Lead (Sn/Pb); Color: GREEN;
LTL-2620HR
LTL-2620HR by Lite-on Technology is a visible LED array with 8 separate elements, each emitting high efficiency red light at a peak wavelength of 635nm. With a max forward current of 0.025A and forward voltage of 2.8V, it is ideal for applications requiring bright illumination in a compact form factor such as indicator lights or signage displays.
LTL-2755Y
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 8.0; Terminal Finish: Tin/Lead (Sn/Pb); Shape: SQUARE;
LTL-2500G
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 4.2; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .025 A;
LTL-2655HR
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 8; Nominal Luminous Intensity (mcd): 8.0; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -35 Cel;
LTL-2800G
SINGLE COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 8; Nominal Luminous Intensity (mcd): 4.2; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 2;
LTL29S-N2Q1-25-Z
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 62.75; Lens Type: COLORLESS DIFFUSED; Height: .65 mm;
LTL29S-P2R1-25-Z
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 98.0; Lens Type: COLORLESS DIFFUSED; No. of Functions: 1;
LTL-2300HR
LTL-2300HR by Lite-on Technology is a high efficiency red LED with a peak wavelength of 635nm. It has a max forward current of 0.025A and operates at temperatures ranging from -35 to 85°C. This LED is commonly used in applications such as signage, displays, and indicator lights.
LTL-2600HR
LTL-2600HR by Lite-on Technology is a visible LED with 4 separate elements, each emitting high efficiency red light at a peak wavelength of 635nm. With a max forward current of 0.025A and forward voltage of 2.8V, it is ideal for applications requiring bright red illumination in various electronic devices.
LTL-2855G
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 8; Terminal Finish: Tin/Lead (Sn/Pb); Height: 6.15 mm;
LTL-2720Y
SINGLE COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 16; Nominal Luminous Intensity (mcd): 4.2; Terminal Finish: Tin/Lead (Sn/Pb); Color: YELLOW;
LTL29S-N1R2-25
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 420.0; Lens Type: COLORLESS DIFFUSED; Terminal Finish: TIN;
LTL-2400Y
Ledtronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 8.2; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 585;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved