Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HSMF-C155 by Broadcom is a dual color LED with separate, 2-element configuration. It has a size of 2.06 mm and a max forward current of 0.02 A. This LED is commonly used in applications that require high efficiency red/green lighting with a viewing angle of 170°.
Median Price
$0.392
Lifecycle Status
Suppliers In-Stock
59
In-Stock Inventory
1k+
Newark
1+ parts
$0.209
100+ parts
$0.191
1k+ parts
$0.177
10k+ parts
-
Mouser Electronics
$0.560
$0.276
$0.214
$0.168
DigiKey
$0.280
$0.215
$0.179
Adafruit Industries
$0.844
$0.768
$0.692
Element14
$0.274
$0.243
EBV Elektronik
Chip1Stop
$0.199
$0.151
Verical
$0.308
Digiode
$0.192
Nova Conductors
$0.195
TME
$0.230
$0.174
$0.156
$0.139
NAC Semi
$0.231
Component Electronics Inc.
$0.380
$0.290
$0.250
Maritex
$1.602
$0.333
$0.264
American Microsemiconductor Inc.
$1.630
Vyrian
Chip Stock
Halfin
LIBRA Elektronik GmbH
Classic Components Corporation
HZD GmbH
Dan-Mar Components
R&J Components
Whistler Technology
DF Sales Co.
ComSIT USA
SIE Connect GmbH - GreenChips
Inventory MP
Sea View Technologies
Micros
$0.155
Partservice
$0.095
Micros sp.j. W. Kędra i J. Lic
$0.101
Sogenti Electronics
Global Solutions Electronics Company
Semtec, LLC
Atlantic Semiconductor
Lantek
Greenchips
Prism Electronics
Holdelec - ElecDif-Pro
Connector Distribution Corp
Right Parts Inc.
Rebound Electronics
Cyclops Electronics Ltd
Bristol Electronics
Martec Srl
Netsource Technology, Inc.
BCID Electronics Ltd.
PC Components Company LLC
ComSIT Distribution GmbH
Component Sense
EMSNET
Ashlea Components Ltd
ACDS - Activité Composants Distribution Service
ABC Electronics Ltd.
Sensible Micro Corp
NPI Materials, Inc.
Semi Source
Decca Corp
$0.130
$0.127
$0.126
Corphita
$0.182
Argo Parts USA
$0.185
Netroflash
Component Stockers USA
$0.210
$0.150
$0.140
Corohmni
$0.468
Aztec Data Supply Inc.
$0.518
Advanced Electronics
Eastek
Continental Prestige Electronics
$0.206
$0.159
Metaverse IC Inc.
Formix International (Excess)
Infinite Electronics LLP (Excess)
QUARKTWIN TECHNOLOGY LTD
Computer Components Inc. - USA
Cyclops Electronics Ltd (Excess)
Assy Fe
GreenTree Electronics
Kepictronics
A-Z Elektronik GmbH
Glotronic Ltd.
Alle Elektronik GmbH
Supply Digital
Robosynatics
$1.341
Lucentia Tech
Perfect Parts
Futuretech Components
Having separate 2 elements allows for dual functionality, making this LED versatile for different applications.
With a small size, this LED can fit into compact devices and designs easily.
A low forward current requirement means less power consumption and longer operational life.
The specific peak wavelengths of green and red colors ensure accurate and vibrant color output.
The untinted diffused lens type provides uniform light distribution and reduces glare, making it suitable for various lighting applications.
Being a dual color LED, it offers the flexibility to choose between green and red colors for different visual effects.
With a high maximum operating temperature, this LED can withstand heat better and remain reliable in diverse environments.
High efficiency red and green colors deliver bright and energy-efficient lighting solutions.
Surface mount design simplifies installation and integration into PCBs, enhancing ease of use in manufacturing processes.
The low forward voltage requirement ensures efficient power usage and compatibility with various power sources.
Visible LEDs HSMF-C155 attributes and parameters. Explore more Visible LEDs devices from Broadcom
Additional Features:
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Shape:
Size:
Sub-Category:
Terminal Finish:
Terminal Pitch:
Viewing Angle:
HSMF-C155 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Assembly/Origin - Mult Changes 22-Feb-2022
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
LL4148
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
General Diode
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM358N
NXP Semiconductors
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
0462-201-16141
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99WT1G
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
L-934GD-12V
Kingbright
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15; Lens Type: DIFFUSED; Color: GREEN;
LGR971
Infineon Technologies
LGR971 by Infineon Technologies is a 1.3mm SINGLE COLOR LED with peak wavelength of 570nm, emitting GREEN light. It has a max forward current of 0.025A and operates b/w -30°C to 95°C. Ideal for applications requiring diffused green light with a wide viewing angle of 160°.
SSF-LXH2103IID/4
Lumex
SINGLE COLOR LED ARRAY;
598-8270-107F
Dialight
Dialight's 598-8270-107F is a 2mm single color LED with water clear lens. It has a max forward current of 0.025A, forward voltage of 2.4V, and luminous intensity of 20mcd. Ideal for surface mount applications, offering green light at a viewing angle of 140° suitable for various electronic displays.
597-7721-207F
Dialight's 597-7721-207F is a dual-color LED with peak wavelengths of 586/565nm. It has a max forward current of 0.03A and a viewing angle of 120°, making it ideal for surface mount applications requiring yellow/green light emission. The LED's water-clear lens and compact size of 2.3876mm make it suitable for various optoelectronic designs.
3011
Nte Electronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 4; Shape: ROUND; Viewing Angle: 90 deg;
SSL-LX3052YD
SSL-LX3052YD by Lumex is a 3mm single color LED with peak wavelength of 585nm. It has a max forward current of 0.03A and viewing angle of 70°. Ideal for applications requiring yellow light emission, such as indicator lights in electronic devices.
HSMH-C150
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 17.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HSMH-C170
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 17; Lens Type: DIFFUSED; Terminal Finish: Gold (Au);
TLMG1100-GS08
Vishay Intertechnology
Vishay Intertechnology's TLMG1100-GS08 is a 1.6mm GREEN LED with peak wavelength of 572nm, forward current of 0.03A, and forward voltage of 2.4V. Ideal for surface mount applications in visible LED displays due to its high luminous intensity of 35mcd and wide viewing angle of 160°.
SML-D12M8WT86C
ROHM
ROHM's SML-D12M8WT86C is a 1.2mm SINGLE COLOR LED with max forward current of 0.02A and max forward voltage of 2.2V. Ideal for surface mount applications, it emits yellowish green light with luminous intensity of 25.0mcd, suitable for TR packing in electronics industry.
591-3001-002F
Dialight's 591-3001-002F is a dual color LED with separate configuration and 2.84 mm size. It has a max forward current of 0.03 A and peak wavelengths of 635/572 nm. This LED is suitable for surface mount applications requiring super red/green illumination.
OVM12F3W7
Optek Technology
SINGLE COLOR LED;
HLMP-3507
Hewlett Packard
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Green; Height: 8.8 mm; No. of Functions: 1;
150120GS75000
Wuerth Elektronik & Kg
150120GS75000 by Wurth Elektronik is a 2mm SINGLE COLOR LED with peak wavelength of 515nm. It has a max forward current of 0.03A and viewing angle of 140°. Ideal for applications requiring GREEN light emission, such as indicator lights in electronic devices.
SML-LX1206GC-TR1
The Lumex SML-LX1206GC-TR1 is a 2mm GREEN LED with peak wavelength of 565nm, forward current of 0.025A, and viewing angle of 160°. Ideal for surface mount applications in electronics, it operates b/w -25 to 85 °C and has a luminous intensity of 10.0mcd.
LTST-C150GKT
Lite-on Technology
LTST-C150GKT by Lite-on Technology is a single color LED with peak wavelength of 565nm, forward current of 0.03A, and luminous intensity of 6.0mcd. Ideal for applications requiring green light emission, such as indicator lights in electronic devices. With a compact size of 2.06mm x 1.1mm and surface mounting feature, it offers versatility in design and installation.
HLMP1301
Vch
Visible LEDs; Lens Type: DIFFUSED; Minimum Operating Temperature: -55 Cel; Height: 4 mm; Maximum Operating Temperature: 100 Cel; Peak Wavelength (nm): 635;
MLCAWT-H1-0000-0000E3
Wolfspeed
Wolfspeed's MLCAWT-H1-0000-0000E3 is a single color LED with max forward current of 0.35A and height of 1.2mm. It operates at up to 150°C, emitting white light at 120cd intensity. Ideal for applications requiring high brightness in compact spaces.
LTST-C150KRKT
LTST-C150KRKT by Lite-on Technology is a single color LED with peak wavelength of 639nm and max forward current of 0.03A. Ideal for applications requiring a red/orange light source, this surface mount LED has a viewing angle of 130° and min luminous intensity of 130cd.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HSMF-C165
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 10.0/15.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
Broadcom
HSMF-C165 by Broadcom is a 1.6mm dual-color LED with peak wavelengths of 630nm/570nm, ideal for applications requiring high efficiency red/green illumination. With a max forward current of 0.02A and viewing angle of 120°, it's suitable for surface mount configurations in various electronic devices operating b/w -30°C to 85°C.
HSMF-C155
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 9/15; Lens Type: DIFFUSED; Shape: RECTANGULAR;
HSMF-C163
HSMF-C163 by Broadcom is a 1.6mm dual-color LED with peak wavelengths of 637nm and 523nm. With separate elements, it has a max forward current of 0.02A and viewing angle of 120°. Ideal for surface mount applications requiring red/green color output in compact spaces.
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 90.0/45.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HSMF-C113
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Height: 1 mm; JESD-609 Code: e0; Maximum Forward Voltage: 2.4 V;
HSMF-C113 by Broadcom is a 3-element COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 637/570/468 nm. With a size of 2.1 mm and max forward current of 0.02 A, it's ideal for surface mount applications requiring red/green/blue illumination at a viewing angle of 120°.
HSMF-C114
TRIPLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 85.0/180.0/70.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HSMF-C114 by Broadcom is a 1.1mm COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 637/523/468nm. It has a max forward current of 0.02A and operates b/w -40 to 85°C. Ideal for applications requiring diffused red/green/blue light output in compact designs with surface mounting feature.
HSMF-C115
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Voltage: 5 V; Maximum Forward Voltage: 2.4 V; Maximum Operating Temperature: 85 Cel;
HSMF-C115 by Broadcom is a 3-element COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 637/523/468nm. With a size of 2.1mm and max forward current of 0.02A, it offers red/green/blue colors for various applications like signage, displays, and indicator lights due to its surface mount feature and viewing angle of 120°.
HSMF-C116
HSMF-C116 by Broadcom is a 3-element COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 631/520/466 nm. It has a max forward current of 0.01 A and nominal luminous intensities of 80.0/220.0/45.0 mcd, suitable for surface mount applications requiring red/green/blue illumination in compact devices.
HSMF-C164
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 90.0/10.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 90.0/10.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: GOLD OVER NICKEL;
HSMF-C118
HSMF-C118 by Broadcom is a 2.7mm COMMON ANODE TRIPLE COLOR LED with peak wavelengths of 637nm, 523nm, and 468nm. It has a max forward current of 0.02A and viewing angle of 125°. Ideal for applications requiring diffused lighting such as signage, displays, and indicators due to its red/green/blue color output.
TRIPLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 90.0/120.0/40.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HSMF-C162
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 90.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HSMF-C162 by Broadcom is a 1.6mm dual-color LED with peak wavelengths of 637nm and 595nm. With a viewing angle of 120°, it's ideal for surface mount applications requiring amber/orange-red light output. Operating temperatures range from -30 to 85 °C, making it suitable for various electronic devices.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved