Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE COLOR LED;
Median Price
$0.173
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
100+ parts
$0.164
1k+ parts
10k+ parts
-
Nova Conductors
$0.094
Vyrian
Argo Parts USA
$0.091
Continental Prestige Electronics
$0.092
Modulus Dynamics
$0.104
$0.103
$0.100
Advanced Electronics
Aztec Data Supply Inc.
$0.575
Corohmni
$0.591
AZTECH Wire
$16.130
$15.490
$15.180
$14.880
Kepictronics
QUARKTWIN TECHNOLOGY LTD
Visible LEDs SSL-LX5093AD-TR attributes and parameters. Explore more Visible LEDs devices from Lumex
Optoelectronic Type:
SSL-LX5093AD-TR Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
For over 40 years, Lumex, a member of the ITW Group, has been a global leader in the optoelectronics industry. With the broadest range of high efficiency, high performance LEDs and LCDs in the industry, Lumex provides thousands of standard products and specializes in semi-custom and custom designs. Lumex's optical range encompasses a wide spectrum including UV, visible and infrared wavelengths. Lumex's Technical Design Specialists are experts in collaboratively developing effective, smart solutions to design dilemmas. Lumex is unique in the market due to the unprecedented level of complimentary technical support provided to large and small customers alike. Lumex works closely with clients to identify the best standard or customized technology for each specific application need.
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Gec Plessey Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Mde Semiconductor
FDV304P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
Microsemi
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
FDD5614P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
MBRA160T3G
Onsemi
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
Leshan Radio
Lite-on Semiconductor
Eic Semiconductor
3040
Microprecision Electronics Sa
HSMG-C170
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
LTST-C150KRKT
Lite-on Technology
LTST-C150KRKT by Lite-on Technology is a single color LED with peak wavelength of 639nm and max forward current of 0.03A. Ideal for applications requiring a red/orange light source, this surface mount LED has a viewing angle of 130° and min luminous intensity of 130cd.
LRTBGVTG-U5V5-1+A5B5-29+S9T9-49-20-R33-B
Osram Opto Semiconductors
Osram Opto Semiconductors' LRTBGVTG-U5V5-1+A5B5-29+S9T9-49-20-R33-B is a 2.8mm TRIPLE COLOR LED with peak wavelengths of 632/523/465nm, diffused lens, and max forward current of 0.04A. Ideal for surface mount applications in electronics requiring red/true green/blue illumination with a viewing angle of 120° and luminous intensity up to 2200mcd.
VLMS1300-GS08
Vishay Intertechnology
VLMS1300-GS08 by Vishay Intertechnology is a 1.1mm SUPER RED LED with peak wavelength of 639nm, forward current of 0.03A, and forward voltage of 2.4V. Ideal for surface mount applications in electronics due to its compact size and high luminous intensity of 54.0mcd at a wide viewing angle of 130°.
HSMG-C191
Broadcom
HSMG-C191 by Broadcom is a 1mm SINGLE COLOR LED with peak wavelength of 570nm. It has a max forward current of 0.02A and viewing angle of 170°. Ideal for applications requiring green light emission, such as indicator lights in electronic devices.
KP-2012SGC
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: WATER CLEAR; Height: .75 mm;
SML-A12UTT86
ROHM
ROHM's SML-A12UTT86 is a 1.2mm SINGLE COLOR LED with peak wavelength of 630nm, forward current of 0.03A. Ideal for applications requiring colorless transparent lens, it operates b/w -40 to 85°C and has a luminous intensity of 100mcd.
HLMP-4700
Quality Technologies
SINGLE COLOR LED; Maximum Forward Current: .0075 A; Maximum Operating Temperature: 100 Cel; T-code: T-1 3/4; Color: HIGH EFFICIENCY RED; Minimum Operating Temperature: -55 Cel;
LSGT676-P7Q7-1+N7P7-24
Osram Opto Semiconductors' LSGT676-P7Q7-1+N7P7-24 is a dual-color LED with peak wavelengths of 645nm and 572nm. It has a max forward current of 0.03A, viewing angle of 120°, and nominal luminous intensity of 98.0/62.75mcd. Ideal for applications requiring super red/green colors in compact designs with surface mounting features.
VLMS1500-GS08
VLMS1500-GS08 by Vishay Intertechnology is a 0.5mm SINGLE COLOR LED with peak wavelength of 639nm. It has max forward current of 0.03A and viewing angle of 130°. Ideal for applications requiring SUPER RED illumination in compact spaces.
LTW-C191TS5
LTW-C191TS5 by Lite-on Technology is a 1.1mm SINGLE COLOR LED with a viewing angle of 130° and nominal luminous intensity of 70.0 mcd. Ideal for surface mount applications, it operates b/w -20 to 80 °C, with a max forward current of 0.02 A.
HSMF-C115
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Voltage: 5 V; Maximum Forward Voltage: 2.4 V; Maximum Operating Temperature: 85 Cel;
SML-LXL1206GC-TR
Lumex
SML-LXL1206GC-TR by Lumex is a 1.1mm GREEN LED with peak wavelength of 565nm, forward current of 0.025A, and luminous intensity of 20.0mcd. Ideal for surface mount applications in electronics due to its water clear lens and single color configuration.
MLCAWT-A1-0000-000XE5
Wolfspeed
Wolfspeed's MLCAWT-A1-0000-000XE5 is a single color LED with max forward current of 0.35A and height of 1.2mm. Ideal for applications requiring white light at 120cd luminous intensity, it operates up to 150°C, with max forward voltage of 3.4V and reverse voltage of 5V.
KPT-1608SURCK
Kingbright Electronic
KPT-1608SURCK by Kingbright Electronic is a 1.2mm SINGLE COLOR LED with HYPER RED color, peak wavelength of 650nm, and max forward current of 0.03A. Ideal for surface mount applications, it offers a viewing angle of 120° and nominal luminous intensity of 220.0mcd.
HSMW-C265
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 85 Cel; Maximum Forward Voltage: 3.9 V; JESD-609 Code: e0;
HSME-C191
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 50.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
597-3301-502F
Dialight
Dialight's 597-3301-502F is a single color LED with peak wavelength of 570nm and forward voltage of 2.8V. Ideal for surface mount applications, it has a viewing angle of 110° and luminous intensity of 25.0mcd, making it suitable for indicator lights in various electronic devices.
ASMT-YTD7-0AA02
ASMT-YTD7-0AA02 by Broadcom is a 2.3mm TRIPLE COLOR LED with separate, 3-element configuration and diffused lens. It has peak wavelengths of 630nm (RED), 522nm (GREEN), and 465nm (BLUE). Ideal for applications requiring colorful illumination with a viewing angle of 120° and nominal luminous intensities of up to 1900mcd.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SSL-LXA228SRC-TR11
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
SSL-LX3052YD
SSL-LX3052YD by Lumex is a 3mm single color LED with peak wavelength of 585nm. It has a max forward current of 0.03A and viewing angle of 70°. Ideal for applications requiring yellow light emission, such as indicator lights in electronic devices.
SSL-LXA228SYC-TR31
SSL-LXA228SYC-TR31 by Lumex is a 1.9mm single color LED with peak wavelength of 590nm and max forward current of 0.03A. Ideal for applications requiring a super yellow light source, such as indicator lights in electronic devices. Features surface mounting method and clear lens type.
SSL-LX3044AD
SSL-LX3044AD by Lumex is a 3mm single color LED with built-in resistor. It has a peak wavelength of 605nm and viewing angle of 60°. Ideal for applications requiring amber light emission, such as indicator lights in electronic devices.
SSL-LX3044LYD
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 30.0; Lens Type: DIFFUSED; Viewing Angle: 60 deg;
SSL-LX5093SIC
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1800.0; Lens Type: WATER CLEAR; Shape: ROUND;
SSL-LX5093SRC/DV
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1600.0; Lens Type: WATER CLEAR; Viewing Angle: 30 deg;
SSL-LX5093SUGC
SSL-LX5093SUGC by Lumex is a 5mm single color LED with built-in resistor. It has a peak wavelength of 574nm, viewing angle of 30°, and luminous intensity of 1000.0mcd. Ideal for applications requiring super ultra green light emission in bulk packaging for radial mounting setups.
SSL-LX3044SYC
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1000.0; Lens Type: WATER CLEAR; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu);
SSL-LX2573GD
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu);
SSL-LX3059IGW
SSL-LX3059IGW by Lumex is a 3mm dual color LED with common cathode configuration. It has a peak wavelength of 635/565nm and max forward current of 0.025A, making it ideal for applications requiring high intensity red/green light output. With a viewing angle of 60° and radial mount feature, this LED is suitable for various lighting projects in temperatures ranging from -40 to 85°C.
SSL-LXA3025IGC-TR
SSL-LXA3025IGC-TR by Lumex is a 2.8mm DUAL COLOR LED with 1 function, peak wavelengths of 635/565nm, and clear lens. Ideal for surface mount applications, it has a max forward current of 0.03A and operates b/w -40 to 85°C. With red/green colors and a viewing angle of 130°, it offers luminous intensity of 12.0/20.0mcd for versatile lighting solutions.
SSL-LX3059IGW-CA
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 30.0; Lens Type: DIFFUSED MILKY WHITE; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu);
SSL-LX5093XUSBC
Lumex SSL-LX5093XUSBC is a 5mm WATER CLEAR LED with peak wavelength of 470nm. It has a max forward current of 0.025A and nominal luminous intensity of 2500mcd. Ideal for applications requiring ultra super blue light in a radial mount configuration.
SSL-LX3044AD-12V
SSL-LX3044AD-12V by Lumex is a 3mm single color LED with peak wavelength of 605nm and 15.0mcd luminous intensity. Ideal for applications requiring amber light, it has a diffused lens, operates at -40 to 85°C, and features radial mounting.
SSL-LX3044AD-5V
SSL-LX3044AD-5V by Lumex is a 3mm amber LED with a peak wavelength of 605nm and a viewing angle of 60°. It has a max forward current of 0.012A and can operate in temperatures ranging from -40 to 85°C. This LED is commonly used for signaling and indicator applications.
SSL-LX5093IGW
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 30.0/20.0; Lens Type: DIFFUSED MILKY WHITE; Size: 5 mm;
SSL-LX2579IGW
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 14.0/8.0; Lens Type: DIFFUSED WHITE; No. of Functions: 1;
SSL-LXA228GC-TR11
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 30.0; Lens Type: CLEAR; T-code: T-3/4;
SSL-LX5093AC
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 80.0; Lens Type: WATER CLEAR; Terminal Finish: Tin (Sn);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved