Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SSL-LX2579IGW by Lumex is a 5mm dual-color LED with built-in resistor. It has a peak wavelength of 635/565nm, viewing angle of 110°, and nominal luminous intensity of 14.0/8.0mcd. Ideal for applications requiring high-intensity red/green illumination in bulk packaging with radial mounting feature.
Median Price
$0.220
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Arrow
1+ parts
$0.026
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$0.590
$0.297
$0.213
$0.167
DigiKey
$0.296
$0.228
$0.189
Master Electronics
$0.190
$0.154
Verical
$0.249
$0.227
Chip1Stop
$0.149
Nova Conductors
$0.172
TME
$0.462
$0.198
$0.178
$0.158
Forefront Electronics and Design
$0.490
IBS Electronics
$0.234
$0.211
Halfin
Electro Sonic
$0.183
$0.147
Vyrian
NAC Semi
$0.300
$0.277
Semi Source
Global Solutions Electronics Company
ACDS - Activité Composants Distribution Service
LWI Electronics Inc
Mil-Aero Solutions, Inc.
Continental Prestige Electronics
$0.169
Argo Parts USA
Advanced Electronics
$0.195
$0.179
$0.168
Aztec Data Supply Inc.
$0.640
Corohmni
$0.756
QUARKTWIN TECHNOLOGY LTD
Having a built-in resistor simplifies the circuit design and ensures the LED is properly protected from excess current.
Compact size allows for easy integration into various electronic devices and projects.
Low forward current consumption helps in energy efficiency and longer lifespan of the LED.
Dual color LED providing both high intensity red and green light options for versatile applications.
Diffused white lens helps in evenly distributing light output for better visual aesthetics.
Ability to emit two different colors makes this LED suitable for applications requiring color-changing effects or indicators.
Having 3 terminals allows for versatile wiring options and control over each color separately.
Low profile design makes it suitable for applications with space constraints.
Rectangular shape offers a modern and sleek appearance for aesthetic appeal.
High intensity red and green colors provide bright and vibrant lighting options for visibility and attention-grabbing purposes.
Bulk packaging is cost-effective for high-volume projects or manufacturing.
Standard terminal pitch allows for easy integration with common electronic components and breadboard-friendly.
Wide viewing angle ensures good visibility from various directions, making it suitable for indicator lights or signs.
High luminous intensity for both red and green colors ensures bright and visible light output for the intended application.
Radial mounting feature allows for easy and secure installation on PCBs or other surfaces.
Visible LEDs SSL-LX2579IGW attributes and parameters. Explore more Visible LEDs devices from Lumex
Color:
Configuration:
Maximum Forward Current:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Terminal Pitch:
Viewing Angle:
SSL-LX2579IGW Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
For over 40 years, Lumex, a member of the ITW Group, has been a global leader in the optoelectronics industry. With the broadest range of high efficiency, high performance LEDs and LCDs in the industry, Lumex provides thousands of standard products and specializes in semi-custom and custom designs. Lumex's optical range encompasses a wide spectrum including UV, visible and infrared wavelengths. Lumex's Technical Design Specialists are experts in collaboratively developing effective, smart solutions to design dilemmas. Lumex is unique in the market due to the unprecedented level of complimentary technical support provided to large and small customers alike. Lumex works closely with clients to identify the best standard or customized technology for each specific application need.
1N4148
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317D2TG
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
Db Lectro
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
EU2B-YS303C
Idec
ROTARY SWITCH;
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
Lite-on Semiconductor
LM555CN
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
EU2B-YS2J03C
XHP35A-00-0000-0D0BD440E
Wolfspeed
Wolfspeed's XHP35A-00-0000-0D0BD440E is a 2.8mm high SINGLE COLOR LED with max forward current of 1.05A and min luminous intensity of 125cd. Ideal for applications requiring white light at a wavelength, with max forward voltage of 11.9V and reverse voltage of 5V.
HLMP-4000
Broadcom
HLMP-4000 by Broadcom is a 5mm dual color LED with common cathode configuration. It has a max forward current of 0.03A and peak wavelengths of 635nm for red and 568nm for green, suitable for applications requiring high efficiency red/green illumination in electronic devices.
150505M173300
Wuerth Elektronik & Kg
TRIPLE COLOR LED;
TLMO1000-GS08
Vishay Intertechnology
TLMO1000-GS08 by Vishay Intertechnology is a 1.6mm SINGLE COLOR LED with peak wavelength of 610nm and max forward current of 0.015A. Ideal for applications requiring soft orange light, such as indicator lights in electronic devices. Operating temperature range from -40 to 100°C makes it versatile for various environments.
HLMP-3507-EF000
HLMP-3507-EF000 by Broadcom is a 5mm SINGLE COLOR LED with peak wavelength of 565nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring high performance green light emission in bulk packaging.
570-0100-132F
Dialight
Dialight's 570-0100-132F is a triple color LED array with separate, 3-element configuration and diffused lens. It has peak wavelengths of 627nm/590nm and max forward current of 0.03A. Ideal for applications requiring red, yellow, and green colors in a compact 1.81mm size package.
LST676-Q1R2-1-Z
Osram Opto Semiconductors
Osram Opto Semiconductors' LST676-Q1R2-1-Z is a 2.4mm single color LED with peak wavelength of 645nm and max forward current of 0.03A. Ideal for applications requiring super red light emission, such as indicator lights in automotive or electronic devices.
HSMF-A341-A00J1
Broadcom's HSMF-A341-A00J1 is a 2.2mm triple color LED with common anode configuration, peak wavelengths of 635/523/468nm, and max forward current of 0.03A. Ideal for applications requiring diffused light output in compact spaces with temp range -55 to 100°C.
SML-D12U8WT86C
ROHM
ROHM's SML-D12U8WT86C is a 1.2mm SINGLE COLOR LED with max forward current of 0.02A and max forward voltage of 2.2V. Ideal for surface mount applications, it has a red color, luminous intensity of 63.0mcd, and operates b/w -40 to 85°C temperature range.
550-1304F
The Dialight 550-1304F is a 5mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.007A and forward voltage of 2.2V, ideal for applications requiring green light emission in visible LEDs. Suitable for radial mounting, it operates b/w -55 to 100°C temperatures with transparent lens and nominal luminous intensity of 1.8mcd.
HDSP-4850
HDSP-4850 by Broadcom is a 10-element single color LED array with peak wavelength of 566nm. It has a max forward current of 0.03A and operates b/w -20 to 85°C. Ideal for applications requiring green light emission in bulk packaging, this rectangular LED array features separate configuration and radial mounting.
HLMP-3507-D0002
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6.15; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
IN-S63AT5UW
Inolux
Inolux IN-S63AT5UW is a 1.2mm white LED with 900.0mcd luminous intensity, 0.025A forward current, and 120° viewing angle. Ideal for surface mount applications in electronics due to its diffused lens and rectangular shape. Operating temperature range from -40°C to 85°C makes it versatile for various lighting needs.
CMD17-21VGD/TR8
Cml Technologies & Kg
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 7.0; Lens Type: DIFFUSED; Height: 1.1 mm;
HLMP-3962
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 14.0; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SSL-LXA228SYC-TR31
Lumex
SSL-LXA228SYC-TR31 by Lumex is a 1.9mm single color LED with peak wavelength of 590nm and max forward current of 0.03A. Ideal for applications requiring a super yellow light source, such as indicator lights in electronic devices. Features surface mounting method and clear lens type.
LTQ39G-Q1OO-25-1
Osram Opto Semiconductors' LTQ39G-Q1OO-25-1 is a 1.1mm single color LED with peak wavelength of 525nm. It has a max forward current of 0.015A and nominal luminous intensity of 71.0mcd, making it ideal for applications requiring true green light emission in surface mount configurations at temperatures ranging from -30 to 85°C.
LYT676-R1S2-26-Z
Osram Opto Semiconductors' LYT676-R1S2-26-Z is a 2.4mm single color LED with peak wavelength of 591nm and luminous intensity of 196.0mcd. Ideal for surface mount applications, it emits yellow light at a wide 120° viewing angle, making it suitable for indicators and signage.
APT2012CGCK
Kingbright Electronic
APT2012CGCK by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with peak wavelength of 574nm, suitable for applications requiring GREEN light emission. With a max forward current of 0.03A and viewing angle of 120°, it's ideal for surface mount installations in various electronic devices. Operating temperatures range from -40 to 85 °C, making it versatile for different environments.
586-2406-205F
Dialight's 586-2406-205F is a single color LED with a tinted lens, 10.7mm size, and T-3 1/4 code. Operating from -30 to 85°C, it emits white light at 412.0mcd intensity. Ideal for panel mounting applications due to its round shape and bulk packaging.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SSL-LXA228SRC-TR11
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
SSL-LX3052YD
SSL-LX3052YD by Lumex is a 3mm single color LED with peak wavelength of 585nm. It has a max forward current of 0.03A and viewing angle of 70°. Ideal for applications requiring yellow light emission, such as indicator lights in electronic devices.
SSL-LX3044AD
SSL-LX3044AD by Lumex is a 3mm single color LED with built-in resistor. It has a peak wavelength of 605nm and viewing angle of 60°. Ideal for applications requiring amber light emission, such as indicator lights in electronic devices.
SSL-LX3044LYD
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 30.0; Lens Type: DIFFUSED; Viewing Angle: 60 deg;
SSL-LX5093SIC
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1800.0; Lens Type: WATER CLEAR; Shape: ROUND;
SSL-LX5093SRC/DV
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1600.0; Lens Type: WATER CLEAR; Viewing Angle: 30 deg;
SSL-LX5093AD-TR
SINGLE COLOR LED;
SSL-LX5093SUGC
SSL-LX5093SUGC by Lumex is a 5mm single color LED with built-in resistor. It has a peak wavelength of 574nm, viewing angle of 30°, and luminous intensity of 1000.0mcd. Ideal for applications requiring super ultra green light emission in bulk packaging for radial mounting setups.
SSL-LX3044SYC
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1000.0; Lens Type: WATER CLEAR; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu);
SSL-LX2573GD
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu);
SSL-LX3059IGW
SSL-LX3059IGW by Lumex is a 3mm dual color LED with common cathode configuration. It has a peak wavelength of 635/565nm and max forward current of 0.025A, making it ideal for applications requiring high intensity red/green light output. With a viewing angle of 60° and radial mount feature, this LED is suitable for various lighting projects in temperatures ranging from -40 to 85°C.
SSL-LXA3025IGC-TR
SSL-LXA3025IGC-TR by Lumex is a 2.8mm DUAL COLOR LED with 1 function, peak wavelengths of 635/565nm, and clear lens. Ideal for surface mount applications, it has a max forward current of 0.03A and operates b/w -40 to 85°C. With red/green colors and a viewing angle of 130°, it offers luminous intensity of 12.0/20.0mcd for versatile lighting solutions.
SSL-LX3059IGW-CA
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 30.0; Lens Type: DIFFUSED MILKY WHITE; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu);
SSL-LX5093XUSBC
Lumex SSL-LX5093XUSBC is a 5mm WATER CLEAR LED with peak wavelength of 470nm. It has a max forward current of 0.025A and nominal luminous intensity of 2500mcd. Ideal for applications requiring ultra super blue light in a radial mount configuration.
SSL-LX3044AD-12V
SSL-LX3044AD-12V by Lumex is a 3mm single color LED with peak wavelength of 605nm and 15.0mcd luminous intensity. Ideal for applications requiring amber light, it has a diffused lens, operates at -40 to 85°C, and features radial mounting.
SSL-LX3044AD-5V
SSL-LX3044AD-5V by Lumex is a 3mm amber LED with a peak wavelength of 605nm and a viewing angle of 60°. It has a max forward current of 0.012A and can operate in temperatures ranging from -40 to 85°C. This LED is commonly used for signaling and indicator applications.
SSL-LX5093IGW
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 30.0/20.0; Lens Type: DIFFUSED MILKY WHITE; Size: 5 mm;
SSL-LXA228GC-TR11
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 30.0; Lens Type: CLEAR; T-code: T-3/4;
SSL-LX2579SISYW-CA
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 50.0; Lens Type: DIFFUSED MILKY WHITE; Configuration: COMMON ANODE, 2 ELEMENTS;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved