Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SSL-LXA228SYC-TR31 by Lumex is a 1.9mm single color LED with peak wavelength of 590nm and max forward current of 0.03A. Ideal for applications requiring a super yellow light source, such as indicator lights in electronic devices. Features surface mounting method and clear lens type.
Median Price
$0.278
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.630
100+ parts
$0.312
1k+ parts
$0.232
10k+ parts
$0.193
DigiKey
-
$0.257
$0.213
Master Electronics
$0.203
Verical
$0.299
$0.249
Edge Electronics
Nova Conductors
$0.205
Bristol Electronics
IBS Electronics
$0.304
$0.254
Electro Sonic
$0.210
$0.162
Vyrian
Q Components
Sensible Micro Corp
Corohmni
Advanced Electronics
$0.199
$0.189
Argo Parts USA
Continental Prestige Electronics
$0.201
Aztec Data Supply Inc.
$0.300
Authorized Procurement Solutions
Netroflash
$0.195
$0.191
Single configuration makes it easy to use and install.
Small size allows for compact and space-saving designs.
Efficiently consumes power while providing adequate brightness.
Produces a bright yellow light at a specific wavelength.
Clear lens ensures maximum light output without distortion.
Ideal for applications where only one color is required.
Simplified connections and easy to integrate into circuits.
Can withstand high temperatures, suitable for various environments.
Low profile design for versatile mounting options.
Classic round shape for uniform light distribution.
Operates in extreme cold conditions without performance issues.
Produces a vibrant yellow color for specific lighting needs.
Brighter and more intense yellow color than standard LEDs.
Securely packaged for protection during storage and shipping.
Standard terminal spacing for easy soldering and connection.
Wide viewing angle for better visibility in various applications.
Provides a bright light output for improved visibility.
Easy to mount on PCBs for secure and stable installation.
Efficient operation at a low forward voltage for energy savings.
Visible LEDs SSL-LXA228SYC-TR31 attributes and parameters. Explore more Visible LEDs devices from Lumex
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Sub-Category:
T-code:
Terminal Pitch:
Viewing Angle:
SSL-LXA228SYC-TR31 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
For over 40 years, Lumex, a member of the ITW Group, has been a global leader in the optoelectronics industry. With the broadest range of high efficiency, high performance LEDs and LCDs in the industry, Lumex provides thousands of standard products and specializes in semi-custom and custom designs. Lumex's optical range encompasses a wide spectrum including UV, visible and infrared wavelengths. Lumex's Technical Design Specialists are experts in collaboratively developing effective, smart solutions to design dilemmas. Lumex is unique in the market due to the unprecedented level of complimentary technical support provided to large and small customers alike. Lumex works closely with clients to identify the best standard or customized technology for each specific application need.
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Bytesonic Electronics
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
1N4148
Multicomp Pro
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
SMBJ18CA
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MURS160T3G
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
555-2001F
Dialight
Dialight's 555-2001F is a 2mm single color LED with peak wavelength of 655nm. It has a max forward current of 0.05A and viewing angle of 90°. Ideal for applications requiring red light emission, such as indicator lights in electronic devices.
HLMP1719
Vch
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .007 A; Viewing Angle: 50 deg; Peak Wavelength (nm): 583;
SMLE12BC7TT86
ROHM
ROHM's SMLE12BC7TT86 is a 1.2mm SINGLE COLOR LED with peak wavelength of 468nm, forward current of 0.02A, and luminous intensity of 22.0mcd. Ideal for applications requiring blue light emission in compact electronic devices due to its small size and surface mounting feature.
HLMP-1700
Quality Technologies
SINGLE COLOR LED; Maximum Forward Current: .0075 A; Maximum Operating Temperature: 100 Cel; No. of Functions: 1; Configuration: SINGLE; Minimum Operating Temperature: -55 Cel;
550-2405F
The Dialight 550-2405F is a 5mm red LED with peak wavelength of 650nm. It has a max forward current of 0.02A and forward voltage of 3V, suitable for single color indicator lights in various applications. With diffused lens and nominal luminous intensity of 2.2mcd, it offers a wide viewing angle of 50° for clear visibility.
HLMP3301
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 100 Cel; Maximum Forward Voltage: 3 V; Color At Wavelength: Red;
APT1608SURCK
Kingbright Electronic
Kingbright Electronic's APT1608SURCK is a 1.2mm SINGLE COLOR LED with peak wavelength of 650nm and max forward current of 0.03A. Ideal for applications requiring HYPER RED light, such as indicator lights in electronic devices due to its WATER CLEAR lens and surface mounting feature.
CLV1A-FKB-CK1VW1DE1BB7C3C3
Wolfspeed
CLV1A-FKB-CK1VW1DE1BB7C3C3 by Wolfspeed is a triple color LED with a common anode configuration. It has a max forward current of 0.025 A and can operate at temperatures ranging from -40 to 85 °C. This LED is commonly used in surface mount applications for its red, green, and blue color capabilities.
521-9210F
Dialight's 521-9210F is a 3mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.03A and forward voltage of 3V. Ideal for applications requiring green light emission, such as indicator lights in electronic devices.
SML-D12M8WT86M
ROHM SML-D12M8WT86M is a 1.2mm SINGLE COLOR LED with milky white lens emitting YELLOWISH GREEN light at 25.0mcd intensity. It has a max forward current of 0.02A and operates b/w -40 to 85°C, suitable for surface mount applications in various electronic devices.
HLMP-1503
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
150060YS73220
Wuerth Elektronik & Kg
SINGLE COLOR LED;
CLX6F-FKC-CNP1ST1E1BB7D3D3
Wolfspeed's CLX6F-FKC-CNP1ST1E1BB7D3D3 is a triple color LED with separate 3-element configuration. It has max forward current of 0.035A, forward voltage of 2.6V, and nominal luminous intensity of 877.5/1405.0/267.5 mcd. Ideal for surface mount applications requiring red/green/blue illumination in a compact square shape at temperatures ranging from -40 to 85°C.
SSL-LX3044AD-5V
Lumex
SSL-LX3044AD-5V by Lumex is a 3mm amber LED with a peak wavelength of 605nm and a viewing angle of 60°. It has a max forward current of 0.012A and can operate in temperatures ranging from -40 to 85°C. This LED is commonly used for signaling and indicator applications.
LYT676-R1S2-26-Z
Osram Opto Semiconductors
Osram Opto Semiconductors' LYT676-R1S2-26-Z is a 2.4mm single color LED with peak wavelength of 591nm and luminous intensity of 196.0mcd. Ideal for surface mount applications, it emits yellow light at a wide 120° viewing angle, making it suitable for indicators and signage.
LTST-C170TBKT-5A
Lite-on Technology
LTST-C170TBKT-5A by Lite-on Technology is a 1.4mm BLUE LED with a peak wavelength of 468nm and viewing angle of 130°. Ideal for surface mount applications, it has a max forward current of 0.02A and nominal luminous intensity of 28.1mcd, making it suitable for various lighting projects.
598-8181-107F
Dialight's 598-8181-107F is a single color LED with water clear lens, 1.2mm size, and 0.025A max forward current. Ideal for surface mount applications, it has a viewing angle of 140° and nominal luminous intensity of 300.0 mcd. Operating temp range: -30 to 85 °C.
LTST-C190KFKT
LTST-C190KFKT by Lite-on Technology is a 1.1mm SINGLE COLOR LED with a peak wavelength of 611nm and max forward current of 0.03A. Ideal for applications requiring ULTRA BRIGHT ORANGE light, it has a viewing angle of 130° and operates b/w -35 to 85 °C temperatures.
OVM12F3W7
Tt Electronics Plc
LTST-C150CKT
LTST-C150CKT by Lite-on Technology is a single color LED with peak wavelength of 660nm. It has a max forward current of 0.04A and a viewing angle of 130°. Ideal for surface mount applications, this red LED operates b/w -55 to 85 °C temperatures.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SSL-LXA228SRC-TR11
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
SSL-LX3052YD
SSL-LX3052YD by Lumex is a 3mm single color LED with peak wavelength of 585nm. It has a max forward current of 0.03A and viewing angle of 70°. Ideal for applications requiring yellow light emission, such as indicator lights in electronic devices.
SSL-LX3044AD
SSL-LX3044AD by Lumex is a 3mm single color LED with built-in resistor. It has a peak wavelength of 605nm and viewing angle of 60°. Ideal for applications requiring amber light emission, such as indicator lights in electronic devices.
SSL-LX3044LYD
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 30.0; Lens Type: DIFFUSED; Viewing Angle: 60 deg;
SSL-LX5093SIC
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1800.0; Lens Type: WATER CLEAR; Shape: ROUND;
SSL-LX5093SRC/DV
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1600.0; Lens Type: WATER CLEAR; Viewing Angle: 30 deg;
SSL-LX5093AD-TR
SSL-LX5093SUGC
SSL-LX5093SUGC by Lumex is a 5mm single color LED with built-in resistor. It has a peak wavelength of 574nm, viewing angle of 30°, and luminous intensity of 1000.0mcd. Ideal for applications requiring super ultra green light emission in bulk packaging for radial mounting setups.
SSL-LX3044SYC
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1000.0; Lens Type: WATER CLEAR; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu);
SSL-LX2573GD
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu);
SSL-LX3059IGW
SSL-LX3059IGW by Lumex is a 3mm dual color LED with common cathode configuration. It has a peak wavelength of 635/565nm and max forward current of 0.025A, making it ideal for applications requiring high intensity red/green light output. With a viewing angle of 60° and radial mount feature, this LED is suitable for various lighting projects in temperatures ranging from -40 to 85°C.
SSL-LXA3025IGC-TR
SSL-LXA3025IGC-TR by Lumex is a 2.8mm DUAL COLOR LED with 1 function, peak wavelengths of 635/565nm, and clear lens. Ideal for surface mount applications, it has a max forward current of 0.03A and operates b/w -40 to 85°C. With red/green colors and a viewing angle of 130°, it offers luminous intensity of 12.0/20.0mcd for versatile lighting solutions.
SSL-LX3059IGW-CA
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 30.0; Lens Type: DIFFUSED MILKY WHITE; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu);
SSL-LX5093XUSBC
Lumex SSL-LX5093XUSBC is a 5mm WATER CLEAR LED with peak wavelength of 470nm. It has a max forward current of 0.025A and nominal luminous intensity of 2500mcd. Ideal for applications requiring ultra super blue light in a radial mount configuration.
SSL-LX3044AD-12V
SSL-LX3044AD-12V by Lumex is a 3mm single color LED with peak wavelength of 605nm and 15.0mcd luminous intensity. Ideal for applications requiring amber light, it has a diffused lens, operates at -40 to 85°C, and features radial mounting.
SSL-LX5093IGW
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 30.0/20.0; Lens Type: DIFFUSED MILKY WHITE; Size: 5 mm;
SSL-LX2579IGW
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 14.0/8.0; Lens Type: DIFFUSED WHITE; No. of Functions: 1;
SSL-LXA228GC-TR11
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 30.0; Lens Type: CLEAR; T-code: T-3/4;
SSL-LXA228SYC-TR21
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 300.0; Lens Type: CLEAR; Color: SUPER YELLOW;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved