Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KPT-1608SURCK by Kingbright Electronic is a 1.2mm SINGLE COLOR LED with HYPER RED color, peak wavelength of 650nm, and max forward current of 0.03A. Ideal for surface mount applications, it offers a viewing angle of 120° and nominal luminous intensity of 220.0mcd.
Median Price
$0.076
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
Distrelec
1+ parts
$0.098
100+ parts
1k+ parts
-
10k+ parts
TTI Europe
$0.050
Arrow
$0.059
Chip1Stop
$0.048
Newark
$0.060
Farnell
$0.125
$0.093
RS (Exports)
$0.149
$0.099
$0.080
Verical
$0.066
Element14
$0.264
$0.202
Bürklin Elektronik
$0.085
$0.067
NAC Semi
$0.082
Chip Stock
IBS Electronics
$0.054
Vyrian
TME
$0.165
$0.102
$0.053
Micros
$0.056
Cyclops Electronics Ltd
SOS electronic
$0.061
Pegasus Components GmbH
Rebound Electronics
LIBRA Elektronik GmbH
Ashlea Components Ltd
ComSIT Distribution GmbH
A&K Electronics
Rotakorn
Bristol Electronics
Nova Conductors
Advanced Electronics
$0.179
$0.170
Corohmni
$0.427
Aztec Data Supply Inc.
$0.470
Eastek
Abacus Technologies
Continental Prestige Electronics
$0.065
Computer Components Inc. - USA
Argo Parts USA
Cyclops Electronics Ltd (Excess)
Bastille Electronics
Robosynatics
Lucentia Tech
Kepictronics
Provides simplicity and focused functionality for specific applications.
Compact size allows for easy integration into various electronic devices.
Efficient current consumption for longer operational lifespan.
Ideal wavelength for hyper red color emission, providing clear visibility.
Ensures maximum light transmission and visibility.
Specifically designed for single color applications, ensuring consistent performance.
Can withstand higher temperatures, suitable for various environments.
Low profile design for space-constrained applications.
Modern and versatile shape for easy integration into different designs.
Capable of functioning in cold environments without compromising performance.
Provides excellent conductivity and corrosion resistance for reliable connection.
Vivid color for clear visibility and indication purposes.
Secure packaging method for safe transportation and storage.
Standard pitch size for easy soldering and connection.
Wide viewing angle for better visibility from different perspectives.
High luminous intensity for bright and clear illumination.
Convenient mounting option for easy installation on PCBs.
Visible LEDs KPT-1608SURCK attributes and parameters. Explore more Visible LEDs devices from Kingbright Electronic
Color:
Configuration:
Maximum Forward Current:
JESD-609 Code:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Terminal Finish:
Terminal Pitch:
Viewing Angle:
KPT-1608SURCK Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
The Kingbright group was founded in 1980 as one of Taiwan’s LED pioneers. Over the last 40 years, we have grown from a small local business to a multi-national enterprise spanning Europe, America, and Asia. Our products are found in computers, consumer electronics, automotive, lighting, and many other applications. The Kingbright brand is trusted by customers world-wide as a world-class manufacturer of LEDs, one of the top-three LED packagers in Taiwan. The group has over 2,000 employees and more than 38,000 sq. meters of automated production facilities. Kingbright people are highly educated (16% with advanced degrees) and experienced (97% of managers with more than 5 years of service). Over the last 40 years of experience in LED design and manufacturing, with support from our loyal customers and suppliers, form the foundation of our competitive strength. Kingbright has five manufacturing plants with a monthly production rate of 800-million LEDs per month. Kingbright maintains the highest quality standards, recognized with ISO 9001 quality, TS 16949 automotive, and ISO 14001 environmental certifications. Our products also carry UL and VDE certifications. The factory is recognized with the BS OHSAS 18001 certificate for employee health and safety, as well as green certifications from Sony and Samsung. The production flow is managed by an advanced Oracle ERP system. Six Sigma management principles guide continuous improvement to the production efficiency and quality.
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
SMBJ18CA
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM8S003F3P6TR
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STM32H743XIH6
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
EU2B-YS2J03C
Idec
ROTARY SWITCH;
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Renesas Electronics
LSL29K-H1J2-1-Z
Osram Opto Semiconductors
Osram Opto Semiconductors' LSL29K-H1J2-1-Z is a 1.3mm single color LED with peak wavelength of 643nm and viewing angle of 160°. Ideal for surface mount applications, it has a max forward current of 0.02A and nominal luminous intensity of 4.95mcd, making it suitable for super red lighting needs.
HSMG-C150
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: DIFFUSED; Size: 2 mm;
598-8510-207F
Dialight
Dialight's 598-8510-207F is a 2mm dual-color LED with water-clear lens. It has max forward current of 0.02A, operating temp range -40 to 100°C, and viewing angle of 160°. Ideal for surface mount applications requiring red/green light indication in compact spaces.
3018
Nte Electronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 1.6; Shape: ROUND; Maximum Forward Current: .1 A;
LGR971-Z
The Osram Opto Semiconductors LGR971-Z is a single color LED with peak wavelength of 572nm, forward current of 0.025A, and max forward voltage of 2.5V. Ideal for applications requiring green light emission in compact spaces due to its small size (1.4mm) and surface mounting feature.
VLMS1500-GS08
Vishay Intertechnology
VLMS1500-GS08 by Vishay Intertechnology is a 0.5mm SINGLE COLOR LED with peak wavelength of 639nm. It has max forward current of 0.03A and viewing angle of 130°. Ideal for applications requiring SUPER RED illumination in compact spaces.
3011
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 4; Shape: ROUND; Viewing Angle: 90 deg;
HLMP3401
Three-five Systems
HLMP3401 by Three-five Systems is a visible LED with peak wavelength of 583nm, forward voltage of 3V, and max current of 0.02A. It's used in applications requiring yellow light emission, with diffused lens type and wide 75° viewing angle.
SSL-LX2573GD
Lumex
SSL-LX2573GD by Lumex is a 5mm green LED with a peak wavelength of 565nm. It has a max forward current of 0.025A and operates b/w -40 to 85°C. Ideal for applications requiring a diffused light source, such as indicator lights in electronic devices.
OVM12F3Y7
Tt Electronics Plc
SINGLE COLOR LED;
CMD17-21VGC/TR8
Cml Technologies & Kg
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: CLEAR; Shape: RECTANGULAR;
CLV1A-FKB-CK1VW1DE1BB7C3C3
Wolfspeed
CLV1A-FKB-CK1VW1DE1BB7C3C3 by Wolfspeed is a triple color LED with a common anode configuration. It has a max forward current of 0.025 A and can operate at temperatures ranging from -40 to 85 °C. This LED is commonly used in surface mount applications for its red, green, and blue color capabilities.
150141BS73100
Wuerth Elektronik & Kg
150141BS73100 by Wurth Elektronik is a 2.4mm BLUE LED with peak wavelength of 465nm, forward current of 0.03A, and luminous intensity of 270.0mcd. Ideal for surface mount applications in electronics, offering a wide viewing angle of 120° and operating temperatures from -40°C to 85°C.
LTST-C170CKT
Lite-on Technology
LTST-C170CKT by Lite-on Technology is a 1.4mm single color LED with peak wavelength of 660nm. It has a max forward current of 0.04A and viewing angle of 130°, making it ideal for applications requiring red light emission in compact spaces.
150060GS55040
150060GS55040 by Wurth Elektronik is a single color LED with a peak wavelength of 520nm and a viewing angle of 140°. With a size of 1mm, it has a max forward current of 0.02A and operates b/w -40°C to 85°C. Ideal for applications requiring green light emission in compact spaces.
KP-2012MGC
Kingbright Electronic
KP-2012MGC by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with a peak wavelength of 574nm and water clear lens. Ideal for applications requiring a MEGA GREEN light source, it has a viewing angle of 120° and operates b/w -40 to 85 °C, making it suitable for various surface mount lighting projects.
VLMG1500-GS08
Vishay Intertechnology's VLMG1500-GS08 is a 0.5mm SINGLE COLOR LED with peak wavelength of 611nm. It has max forward current of 0.03A and viewing angle of 130°. Ideal for surface mount applications, it emits YELLOW GREEN light at 90.0mcd luminous intensity.
LTST-C155KGJRKT
LTST-C155KGJRKT by Lite-on Technology is a 2.7mm dual-color LED with peak wavelengths of 639nm and 574nm. With a max forward current of 0.03A, it's ideal for applications requiring separate red and green elements in a compact surface-mount configuration. Operating temperatures range from -55°C to 85°C, making it suitable for various lighting solutions.
ASMB-MTB0-0A3A2
Broadcom
ASMB-MTB0-0A3A2 by Broadcom is a 2.4mm TRIPLE COLOR LED with COMMON ANODE, featuring red/green/blue colors and diffused lens. With peak wavelengths of 634/522/465nm, it has a viewing angle of 115° and nominal luminous intensity of 540.0/1600.0/350.0 mcd. Ideal for surface mount applications, it operates b/w -40 to 100 °C, with max forward current at 0.025 A and voltage at 2.6 V.
KP-2012SURCK
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 150.0; Lens Type: WATER CLEAR; Height: 1.1 mm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
KPT-1608SGC
KPT-1608SGC by Kingbright Electronic is a 1.2mm SINGLE COLOR LED with a peak wavelength of 565nm and max forward current of 0.025A. Ideal for applications requiring SUPER BRIGHT GREEN illumination, such as indicator lights in electronic devices. With a viewing angle of 120° and water clear lens, it offers high luminous intensity at 15.0mcd.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: WATER CLEAR; Terminal Pitch: 1.65 mm;
KPT-1608SURCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 150.0; Lens Type: WATER CLEAR; Maximum Forward Current: .03 A;
KPT-1608CGCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 40.0; Lens Type: WATER CLEAR; Terminal Pitch: 1.65 mm;
KPT-1608CGCK by Kingbright Electronic is a 1.2mm GREEN LED with 0.03A forward current and peak wavelength of 574nm. Ideal for surface mount applications, it offers a viewing angle of 120° and luminous intensity of 50.0mcd, suitable for various optoelectronic projects.
KPT-1608EC
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: WATER CLEAR; Shape: RECTANGULAR;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.0; Lens Type: WATER CLEAR; Size: 1.2 mm;
KPT-1608SRC-PRV
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Configuration: SINGLE;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Minimum Operating Temperature: -40 Cel;
KPT-1608SYCK
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 120.0; Lens Type: WATER CLEAR; No. of Functions: 1;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 120.0; Lens Type: WATER CLEAR; Maximum Operating Temperature: 85 Cel;
KPT-1608ZGC-E
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 650.0; Lens Type: WATER CLEAR; Configuration: SINGLE;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 650.0; Lens Type: WATER CLEAR; Size: 1.2 mm;
KPT-1608QBC-D
KPT-1608QBC-D by Kingbright Electronic is a 1.2mm BLUE LED with WATER CLEAR lens, 0.03A max current, and 468nm peak wavelength. Ideal for surface mount applications, it offers 120° viewing angle and 100.0mcd luminous intensity. Operating temp range: -40°C to 85°C.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Peak Wavelength (nm): 468;
KPT-1608ZGC
KPT-1608ZGC by Kingbright Electronic is a 1.2mm SINGLE COLOR LED with peak wavelength of 515nm, suitable for applications requiring GREEN light. It has a max forward current of 0.025A and viewing angle of 120°, making it ideal for surface mount installations in various electronic devices. Operating temperature ranges from -40°C to 85°C, ensuring reliable performance in diverse environments.
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 450.0; Lens Type: WATER CLEAR; Packing Method: TR, 7 INCH;
KPT-1608LVZGCK
KPT-1608LVZGCK by Kingbright Electronic is a 1.2mm SINGLE COLOR LED with peak wavelength of 515nm, suitable for applications requiring GREEN light emission. It has a max forward current of 0.025A, water clear lens type, and nominal luminous intensity of 50.0mcd. Ideal for surface mount installations in environments ranging from -40°C to 85°C.
KPT-1608ZGC-G
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 700.0; Lens Type: WATER CLEAR; Viewing Angle: 120 deg;
KPT-1608SURC
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 200.0; Lens Type: WATER CLEAR; Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved