Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HSME-C191 by Broadcom is a 1mm green LED with a peak wavelength of 570nm. It has a max forward current of 0.02A and a viewing angle of 170°. This surface mount LED is commonly used in visible light applications requiring high luminous intensity.
Median Price
$0.490
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$0.242
1k+ parts
$0.185
10k+ parts
$0.154
Mouser Electronics
$0.144
Newark
$0.519
$0.266
$0.228
-
Adafruit Industries
$0.776
$0.737
Element14
$0.337
$0.264
$0.246
EBV Elektronik
Farnell
$0.129
Verical
$0.165
$0.156
Nova Conductors
$0.174
TME
$0.370
$0.205
$0.170
$0.139
Digiode
$0.589
Vyrian
Chip Stock
ComSIT Distribution GmbH
ComSIT USA
PC Components Company LLC
Bristol Electronics
Micros
$0.067
Partservice
$0.082
$0.065
Micros sp.j. W. Kędra i J. Lic
$0.088
$0.070
ACDS - Activité Composants Distribution Service
Goldney Electronics S.L.
Speed Components Ltd
Ampacity Inc.
$0.125
Decca Corp
$0.140
$0.137
$0.136
Semicontronic
Aztec Data Supply Inc.
$0.168
Argo Parts USA
$0.169
Corohmni
$0.334
Corphita
$0.558
Component Stockers USA
$0.600
$0.100
$0.090
Continental Prestige Electronics
$0.629
$0.197
$0.142
$0.117
Advanced Electronics
Andel Nordic
$32.180
$22.524
GreenTree Electronics
Perfect Parts
Eastek
Kepictronics
Futuretech Components
A-Z Elektronik GmbH
Cyclops Electronics Ltd (Excess)
Alle Elektronik GmbH
Speed Components Ltd (Excess)
Netroflash
$0.162
Supply Digital
Allows for easy integration into small electronic devices, saving space and enabling sleek designs.
Provides a consistent and uniform color output, ensuring accurate and reliable visual feedback.
Delivers a bright and vibrant light output, enhancing visibility in low-light conditions.
Produces a green light that is soothing to the eyes and ideal for applications where color accuracy is important.
Disperses light evenly, preventing harsh glares and hotspots, resulting in a more comfortable and pleasing illumination.
Offers a broad field of view, allowing the LED to be easily seen from different angles, improving visibility and user experience.
Simplifies installation and assembly, making it convenient for manufacturers and reducing production time and costs.
Ensures excellent conductivity, minimizing signal loss and maximizing the efficiency of the LED's operation.
Enables reliable performance in extreme environments, making the LED suitable for various applications.
Provides a strong and intense light output, improving readability and attracting attention even from a distance.
Consumes less power, reducing energy costs and prolonging battery life in portable devices.
Protects the LED during transportation and storage, ensuring its quality and functionality upon arrival.
Allows for precise positioning and alignment, facilitating integration into specific product designs.
Ensures safe operation and protects the LED from potential damage caused by reverse voltage.
Provides compatibility with standard electronic connectors, simplifying the integration process for manufacturers.
Visible LEDs HSME-C191 attributes and parameters. Explore more Visible LEDs devices from Broadcom
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Lens Type:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Shape:
Size:
Sub-Category:
Terminal Finish:
Terminal Pitch:
Viewing Angle:
HSME-C191 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Design/Specification - Alternate Die Source 11/Sep/2013
PCN Assembly/Origin - HSM/QSM 20/Sep/2016
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
LL4148
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBRS3200T3G
Onsemi
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
HSMH-C150
Broadcom
HSMH-C150 by Broadcom is a 2mm SINGLE COLOR LED with peak wavelength of 660nm. It has max forward current of 0.03A and viewing angle of 170°. Ideal for applications requiring red light emission, such as indicator lights in electronic devices.
MLCAWT-H1-0000-000XE3
Wolfspeed
Wolfspeed's MLCAWT-H1-0000-000XE3 is a single color LED with max forward current of 0.35A and height of 1.2mm. Ideal for applications requiring white light at 120cd luminous intensity, it operates up to 150°C, with max forward voltage of 3.4V and reverse voltage of 5V.
Q12P1CXXW12E
Apem Components
The Apem Components Q12P1CXXW12E is a 12mm single color LED with diffused lens, emitting white light at 1200.0mcd intensity. Ideal for panel mounting applications, it has a wide 60° viewing angle and operates b/w -40°C to 85°C temperature range.
571-0120-100F
Dialight
SINGLE COLOR LED ARRAY;
MLCAWT-H1-0000-0000E3
Cree Led
SINGLE COLOR LED; Maximum Forward Voltage: 3.4 V; Color At Wavelength: White; Maximum Forward Current: .35 A; Minimum Luminous Intensity: 120 cd; Maximum Operating Temperature: 150 Cel;
LSGT676-P7R-1-0+N7P9-24
Osram Opto Semiconductors
Osram Opto Semiconductors' LSGT676-P7R-1-0+N7P9-24 is a dual-color LED with peak wavelengths of 645nm (super red) and 572nm (green). It has a max forward current of 0.03A, viewing angle of 120°, and nominal luminous intensity of 118.0/68.0 mcd. Ideal for surface mount applications in electronics requiring separate red and green light sources.
150352M173300
Wuerth Elektronik & Kg
TRIPLE COLOR LED;
APBA3010SURKCGKC-GX
Kingbright Electronic
APBA3010SURKCGKC-GX by Kingbright Electronic is a 2mm dual color LED with common anode configuration. It has a max forward current of 0.03A and peak wavelengths of 650nm/574nm, suitable for applications requiring hyper red/green illumination in compact spaces. With a viewing angle of 140° and water clear lens type, it is ideal for surface mount installations in various electronic devices.
SML-LX0603YW-TR
Lumex
SML-LX0603YW-TR by Lumex is a 1mm single color LED with peak wavelength of 585nm. It has a max forward current of 0.03A and viewing angle of 160°. Ideal for surface mount applications, it emits yellow light with luminous intensity of 14.0mcd, suitable for various electronic devices.
XHP35B-H0-0000-0D0HC440G
SINGLE COLOR LED;
5310F5
Cml Technologies & Kg
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 16.0; Lens Type: DIFFUSED; T-code: T-1;
LYT676-R1S2-26-Z
Osram Opto Semiconductors' LYT676-R1S2-26-Z is a 2.4mm single color LED with peak wavelength of 591nm and luminous intensity of 196.0mcd. Ideal for surface mount applications, it emits yellow light at a wide 120° viewing angle, making it suitable for indicators and signage.
LGA67K-G2K1-24-Z
Osram Opto Semiconductors' LGA67K-G2K1-24-Z is a single color LED with a peak wavelength of 572nm and a max forward current of 0.02A. It has a round shape, measures 2.4mm in size, and is suitable for surface mount applications requiring a green light source with a viewing angle of 120°.
HLMP-1301
Quality Technologies
SINGLE COLOR LED; Minimum Operating Temperature: -55 Cel; Color: HIGH EFFICIENCY RED; Shape: ROUND; Size: 3 mm; Configuration: SINGLE;
Q62702P5179
Osram Opto Semiconductors' Q62702P5179 is a 1.3mm SINGLE COLOR LED with peak wavelength of 572nm and max forward current of 0.025A. Ideal for applications requiring green light emission, such as indicator lights in electronic devices due to its colorless diffused lens and surface mounting feature.
LTST-C170GKT
Lite-on Technology
LTST-C170GKT by Lite-on Technology is a 1.4mm GREEN LED with a peak wavelength of 565nm and max forward current of 0.03A. Ideal for surface mount applications, it offers a viewing angle of 130° and nominal luminous intensity of 6.0mcd, making it suitable for various lighting solutions.
L-934GD
The Kingbright Electronic L-934GD is a 3mm green LED with a peak wavelength of 565nm and max forward current of 0.025A. Ideal for applications requiring a single color light source, such as indicator lights in electronic devices. With diffused lens and radial mount feature, it offers a viewing angle of 60° for versatile use.
CMD17-21VGC/TR8
Visual Communications Company
CMD17-21VGC/TR8 by Visual Communications Company is a 1.4mm GREEN LED with a peak wavelength of 570nm and max forward current of 0.03A. Ideal for surface mount applications, it offers a viewing angle of 140° and nominal luminous intensity of 10.0mcd.
HLMP-1700
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.1; Lens Type: TINTED DIFFUSED; Terminal Finish: MATTE TIN;
SLR-342VR3F
ROHM
ROHM's SLR-342VR3F is a 3.1mm single color LED with peak wavelength of 650nm, diffused lens, and red color. It has 2 terminals with tin/silver/copper finish, T-1 code, and radial mount feature. Ideal for applications requiring visible LEDs in compact size like indicator lights or displays.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HSME-C265
HSME-C265 by Broadcom is a 1.2mm SINGLE COLOR LED with peak wavelength of 570nm, emitting GREEN light. With max forward current of 0.02A and viewing angle of 170°, it's ideal for surface mount applications in electronics for indicator lights or displays.
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 50.0; Lens Type: UNTINTED NONDIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HSME-C191
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 50.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HSME-C170
HSME-C170 by Broadcom is a 1.4mm SINGLE COLOR LED with peak wavelength of 570nm, emitting GREEN light. With a viewing angle of 170° and luminous intensity of 50.0mcd, it's ideal for surface mount applications in electronics for visual indicators or displays.
HSME-C150
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 50.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: GOLD OVER NICKEL;
HSME-C120
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 52.0; Lens Type: UNTINTED NONDIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 52.0; Lens Type: UNTINTED NONDIFFUSED; Terminal Finish: GOLD OVER NICKEL;
HSME-A100-M02J1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 70.0; Terminal Finish: Tin/Lead (Sn/Pb); Terminal Pitch: 3 mm;
HSME-A100-M02J1 by Broadcom is a 2.2mm SINGLE COLOR LED with peak wavelength of 575nm. It has max forward current of 0.02A and viewing angle of 120°. Ideal for surface mount applications requiring green-yellow light emission in compact spaces.
HSME-C110
HSME-A401-P4PM1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 78.75; Terminal Finish: PURE TIN; Viewing Angle: 120 deg;
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 85.0; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 1;
HSME-A100-L01J1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 40.0; Terminal Finish: Tin/Lead (Sn/Pb); Terminal Pitch: 3 mm;
HSME-A100-L01J1 by Broadcom is a 2.2mm ROUND SINGLE COLOR LED with Peak Wavelength of 566nm and Max Forward Current of 0.02A. Ideal for applications requiring EMERALD GREEN light, it has a viewing angle of 120° and operates b/w -55 to 100 °C.
HSME-C190
HSME-C177
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved