Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
HSME-A401-P4PM1 by Broadcom is a 2.2mm SINGLE COLOR LED with peak wavelength of 568nm, forward current of 0.07A, and luminous intensity of 78.75mcd. Ideal for applications requiring emerald green light emission in compact spaces due to its small size and surface mounting feature.
Median Price
$0.534
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.078
100+ parts
1k+ parts
10k+ parts
-
DigiKey
$0.670
$0.337
$0.261
$0.217
Mouser Electronics
$0.338
$0.262
$0.208
Element14
$0.398
$0.295
$0.258
Digiode
$0.074
Nova Conductors
$0.241
Vyrian
ACDS - Activité Composants Distribution Service
Decca Corp
$0.066
$0.065
$0.064
Semicontronic
Corphita
$0.070
Advanced Electronics
Aztec Data Supply Inc.
$0.228
Aranea Global
$0.237
$0.227
Argo Parts USA
$0.233
Continental Prestige Electronics
$0.236
Corohmni
$0.618
Andel Nordic
$1.465
$1.406
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
Eastek
$0.310
A-Z Elektronik GmbH
Authorized Procurement Solutions
Alle Elektronik GmbH
Supply Digital
Glotronic Ltd.
Cyclops Electronics Ltd (Excess)
Single configuration makes it easy to use and suitable for simple lighting applications.
Compact size allows for versatile placement and integration within different electronic devices.
Low forward current consumption helps in saving energy and ensures efficient operation.
Peak wavelength of 568 nm provides a bright and vibrant green color output.
Single color LED ensures consistent and uniform lighting output for specific applications.
4 terminals offer stable and secure connection for reliable performance.
High maximum operating temperature allows for usage in various environments without any issues.
Low height profile makes it suitable for compact devices and applications where space is limited.
Round shape provides a wide and uniform light distribution pattern.
Low minimum operating temperature ensures reliable performance even in extreme cold conditions.
Pure tin terminal finish offers excellent conductivity and corrosion resistance for a long-lasting connection.
Green color output is visually appealing and suitable for various lighting applications.
Emerald green color provides a unique and vibrant lighting solution for specialized projects.
TR, 7 INCH packing method ensures secure and convenient storage and transportation.
High maximum reverse voltage rating offers protection against potential voltage spikes or reverse polarity.
3 mm terminal pitch allows for easy mounting and installation in various PCB layouts.
Wide 120° viewing angle ensures broad coverage for effective lighting applications.
High luminous intensity of 78.75 mcd provides bright and visible light output.
Surface mounting feature allows for easy and secure installation on PCBs or other surfaces.
Low maximum forward voltage ensures energy-efficient operation and prevents overheating.
Visible LEDs HSME-A401-P4PM1 attributes and parameters. Explore more Visible LEDs devices from Broadcom
Additional Features:
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Maximum Reverse Voltage:
Shape:
Size:
Sub-Category:
Terminal Finish:
Terminal Pitch:
Viewing Angle:
HSME-A401-P4PM1 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Assembly/Origin - Mult Dev Site Chg 10/Jan/2020
Broadcom Inc, a Delaware corporation headquartered in San Jose, CA, is a global technology leader that designs, develops and supplies a broad range of semiconductor and infrastructure software solutions. Broadcom’s category-leading product portfolio serves critical markets including data center, networking, software, broadband, wireless, storage and industrial. Our solutions include data center networking and storage, enterprise and mainframe software focused on automation, monitoring and security, smartphone components, telecoms and factory automation.
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
LL4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
BAV99
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Eic Semiconductor
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
Transys Electronics
1N4148WS
Promax-johnton
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
HLMP3301
Three-five Systems
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Height: 8.9 mm; Color At Wavelength: Red; Peak Wavelength (nm): 635;
LTST-C190KDKT-10A
Lite-on Technology
LTST-C190KDKT-10A by Lite-on Technology is a 1.1mm SINGLE COLOR LED with peak wavelength of 650nm and ultra bright red color. It has a max forward current of 0.02A, viewing angle of 130°, and surface mounting feature. Ideal for applications requiring compact, high-intensity lighting solutions in electronics and automotive industries.
MLCAWT-P1-0000-000XE5
Cree Led
SINGLE COLOR LED; Height: 1.2 mm; Maximum Forward Voltage: 3.4 V; Maximum Reverse Voltage: 5 V; Maximum Operating Temperature: 150 Cel; Minimum Luminous Intensity: 120 cd;
597-2001-213F
Dialight
Dialight's 597-2001-213F is a single color LED with peak wavelength of 643nm and forward voltage of 2.6V. Ideal for surface mount applications, it offers a viewing angle of 120° and luminous intensity of 50.0mcd, making it suitable for indicators and signage in various industries.
VLMB1310-GS08
VLMB1310-GS08 by Vishay Intertechnology is a 1.1mm blue LED with peak wavelength of 468nm, forward current of 0.02A, and luminous intensity of 104.0mcd. Ideal for surface mount applications requiring a compact single color LED with built-in zener diode for reverse voltage protection.
CMD15-21VGD/TR8
Chicago Miniature Lighting
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6.5; Lens Type: DIFFUSED; Packing Method: TR;
HLMP1719
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Color At Wavelength: Yellow; Maximum Forward Voltage: 2.7 V; Maximum Operating Temperature: 100 Cel;
HSMZ-C190
Broadcom
HSMZ-C190 by Broadcom is a 1mm red LED with peak wavelength of 643nm. It has a max forward current of 0.025A and viewing angle of 170°. Ideal for surface mount applications in electronics, displays, and indicator lights due to its compact size and high luminous intensity.
TLMB1100-GS08
TLMB1100-GS08 by Vishay Intertechnology is a 1.6mm BLUE SINGLE COLOR LED with peak wavelength of 428nm, forward current of 0.015A, and viewing angle of 160°. Ideal for surface mount applications in electronics due to its compact size and high luminous intensity.
SML-D12P8WT86C
ROHM
ROHM's SML-D12P8WT86C is a 1.2mm GREEN LED with max forward current of 0.02A and forward voltage of 2.2V. Ideal for surface mount applications, it has a min operating temp of -40°C and max operating temp of 85°C, making it suitable for various lighting solutions.
598-8081-107F
Dialight's 598-8081-107F is a single color LED with water clear lens, emitting green light. It has a size of 1.1mm and max forward current of 0.02A. Ideal for surface mount applications, with viewing angle of 140° and luminous intensity of 340mcd.
TLMG1100-GS15
Vishay Intertechnology's TLMG1100-GS15 is a 1.6mm GREEN LED with peak wavelength of 572nm, forward current of 0.03A, and forward voltage of 2.4V. Ideal for surface mount applications in electronics due to its compact size, high luminous intensity, and wide viewing angle of 160°.
158563427
Wuerth Elektronik & Kg
SINGLE COLOR LED;
LLN3-WW-XXX
Dialight's LLN3-WW-XXX is a complex visible LED with 3 functions, single color warm white light, and round shape. Ideal for surface mount applications, it comes in bulk packaging and has 4 terminals.
150060RS75000
150060RS75000 by Wurth Elektronik is a single color LED with peak wavelength of 630nm and forward current of 0.03A. With water clear lens, it has a viewing angle of 140° and nominal luminous intensity of 250.0mcd. Ideal for surface mount applications in various electronic devices due to its compact size and red color output.
APHBM2012SURKCGKC
Kingbright
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 200.0/50.0; Lens Type: WATER CLEAR; Height: .45 mm;
HLMP-4000#002
Hewlett Packard
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 5/8; Lens Type: DIFFUSED; Terminal Pitch: 1.27 mm;
L-934GD-5V
Kingbright Electronic
L-934GD-5V by Kingbright Electronic is a 3mm green LED with peak wavelength of 565nm and viewing angle of 60°. It has max forward current of 0.025A, ideal for indicator lights in electronic devices due to its diffused lens and nominal luminous intensity of 20.0mcd.
591-2301-013F
Dialight's 591-2301-013F is a single color LED with peak wavelength of 572nm, forward current of 0.03A, and luminous intensity of 4.8mcd. Ideal for surface mount applications, it emits green light with a viewing angle of 40°.
LTST-C150KGKT
LTST-C150KGKT by Lite-on Technology is a single color LED with a peak wavelength of 574nm and max forward current of 0.03A. With water clear lens, it has a viewing angle of 130° and nominal luminous intensity of 35.0mcd. Ideal for surface mount applications requiring green-yellow light emission in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HSME-C265
HSME-C265 by Broadcom is a 1.2mm SINGLE COLOR LED with peak wavelength of 570nm, emitting GREEN light. With max forward current of 0.02A and viewing angle of 170°, it's ideal for surface mount applications in electronics for indicator lights or displays.
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 50.0; Lens Type: UNTINTED NONDIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HSME-C191
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 50.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HSME-C191 by Broadcom is a 1mm green LED with a peak wavelength of 570nm. It has a max forward current of 0.02A and a viewing angle of 170°. This surface mount LED is commonly used in visible light applications requiring high luminous intensity.
HSME-C170
HSME-C170 by Broadcom is a 1.4mm SINGLE COLOR LED with peak wavelength of 570nm, emitting GREEN light. With a viewing angle of 170° and luminous intensity of 50.0mcd, it's ideal for surface mount applications in electronics for visual indicators or displays.
HSME-C150
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 50.0; Lens Type: UNTINTED DIFFUSED; Terminal Finish: GOLD OVER NICKEL;
HSME-C120
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 52.0; Lens Type: UNTINTED NONDIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 52.0; Lens Type: UNTINTED NONDIFFUSED; Terminal Finish: GOLD OVER NICKEL;
HSME-A100-M02J1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 70.0; Terminal Finish: Tin/Lead (Sn/Pb); Terminal Pitch: 3 mm;
HSME-A100-M02J1 by Broadcom is a 2.2mm SINGLE COLOR LED with peak wavelength of 575nm. It has max forward current of 0.02A and viewing angle of 120°. Ideal for surface mount applications requiring green-yellow light emission in compact spaces.
HSME-C110
HSME-A401-P4PM1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 85.0; Terminal Finish: Tin/Lead (Sn/Pb); No. of Functions: 1;
HSME-A100-L01J1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 40.0; Terminal Finish: Tin/Lead (Sn/Pb); Terminal Pitch: 3 mm;
HSME-A100-L01J1 by Broadcom is a 2.2mm ROUND SINGLE COLOR LED with Peak Wavelength of 566nm and Max Forward Current of 0.02A. Ideal for applications requiring EMERALD GREEN light, it has a viewing angle of 120° and operates b/w -55 to 100 °C.
HSME-C190
HSME-A401-Q02J1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 100.0; Terminal Finish: Tin/Lead (Sn/Pb); Color: YELLOW/GREEN;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved