Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TLE8444SLXUMA1 by Infineon Technologies is a half bridge based peripheral driver with a nominal output peak current limit of 2.4A. It features source and sink output current flow direction, making it suitable for applications requiring precise control of power delivery. This small outline package with 24 terminals is designed for surface mount assembly in various electronic systems.
Median Price
$3.225
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Element14
1+ parts
$2.539
100+ parts
-
1k+ parts
10k+ parts
Arrow
$2.792
$1.979
$1.803
Chip1Stop
$2.900
$2.170
Newark
$3.550
$2.200
$2.060
DigiKey
$4.050
$2.514
$2.237
Farnell
$4.596
$3.021
$2.182
Adafruit Industries
$9.268
$8.805
Verical
$1.930
$1.672
Flip Electronics (Authorized)
Digiode
$1.872
Nova Conductors
$3.710
Chip Stock
Vyrian
Flip Electronics
Semicontronic
$1.540
$1.502
$1.494
Ampacity Inc.
Corphita
$1.773
Argo Parts USA
Netroflash
$3.525
$3.450
Aztec Data Supply Inc.
$7.625
Advanced Electronics
Corohmni
$10.422
Modulus Dynamics
$11.436
$10.979
$10.521
Continental Prestige Electronics
$2.850
$2.050
RC Electronics
$3.780
$3.350
GreenTree Electronics
Perfect Parts
This material provides durability and protection for the peripheral driver, making it a reliable choice for long-term use.
The surface mount feature allows for easy installation and efficient use of space on a circuit board.
The rectangular shape of the package allows for a compact design, ideal for applications with limited space.
With 24 terminals, this peripheral driver can support a wide range of connections and devices, making it versatile for various projects.
The small outline package style helps reduce overall size and weight of the driver, improving portability and flexibility.
The tin terminal finish provides good conductivity and corrosion resistance, ensuring stable performance over time.
The dual terminal position allows for more flexibility in circuit design and easier integration into existing systems.
The gull wing terminal form offers secure connections and easy soldering, simplifying the installation process.
With a moisture sensitivity level of 3, this product is suitable for use in environments with moderate humidity levels, increasing its applicability.
The high peak current limit of 2.4 A enables this peripheral driver to handle heavy loads and power demands effectively.
The half bridge based interface IC type offers efficient control and management of connected peripherals, enhancing overall performance.
The ability to handle both source and sink current flow direction makes this peripheral driver versatile and adaptable to various configurations.
Peripheral Drivers TLE8444SLXUMA1 attributes and parameters. Explore more Peripheral Drivers devices from Infineon Technologies
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Output Current Flow Direction:
Nominal Output Peak Current Limit:
Package Body Material:
Package Shape:
Package Style (Meter):
Qualification:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
TLE8444SLXUMA1 Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - TLE8444SL Des/Mat Chgs 6/Feb/2022
PCN Assembly/Origin - Assembly Site Addition 30/Sep/2016
PCN Packaging - 330mm Reel Pkg Chg 3/Aug/2018 Mult Dev Cover Tape Chg 13/Jul/2022
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
Vishay Semiconductors
MBRS340T3G
Onsemi
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
Rochester Electronics
BTS6143DXT/G
Infineon Technologies
BUFFER OR INVERTER BASED PERIPHERAL DRIVER;
BTS721L1
Siemens
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Shape: RECTANGULAR; Terminal Position: DUAL; Turn-off Time: 400 us;
MAX4820EUP
MAX4820EUP by Maxim Integrated is a Peripheral Driver with 8-bit driver, 0.15A output current, and 0.07A peak current limit. It operates b/w -40 to 85°C and has built-in transient protection. Ideal for industrial applications requiring sink output flow direction.
BTS716GXUMA1
BTS716GXUMA1 by Infineon Technologies is a peripheral driver with 4 functions, operating at a supply voltage range of 5.5V to 40V. It offers built-in protections against transient, overvoltage, thermal, and undervoltage conditions. This small outline package is ideal for applications requiring a nominal output peak current limit of 5.3A and turn-on/off times of 250us and 270us respectively.
BTS443PXT
BTS443PXT by Infineon is a MOS peripheral driver with 36V max supply voltage, 7.6A output peak current limit, and built-in protections. It is used for buffer or inverter-based interface ICs in applications requiring sink output current flow direction and fast turn-on/off times.
VN800S-E
STMicroelectronics
STMicroelectronics' VN800S-E is a peripheral driver with 8-36V power supplies, built-in protections, and source output current flow. Its compact rectangular package is ideal for applications requiring transient, over current, over voltage, thermal, and under voltage protection in various electronic systems.
IRS2004SPBF
IRS2004SPBF by Infineon is a peripheral driver with 8 terminals and built-in transient protection. It operates b/w -40 to 125 °C, suitable for automotive applications. With a supply voltage range of 10-20 V, it offers fast turn-on/off times (0.82/0.22 us) and supports source/sink current flow.
IRS21864STRPBF
IRS21864STRPBF by Infineon Technologies is a 14-terminal peripheral driver with built-in transient and under voltage protections. It operates b/w -40 to 125 °C, suitable for automotive applications. With a max supply voltage of 20 V, it offers a nominal output peak current limit of 4 A and turn-on/off time of 0.25 us.
MIC5801YWM
Microchip Technology
MIC5801YWM by Microchip Technology is an 8-function peripheral driver with a max supply current of 2mA. It operates in industrial temperature range (-40 to 85°C) and has a nominal voltage of 5V. This small outline package IC is ideal for applications requiring inverted output polarity and sink current flow direction.
BTS50081EKBXUMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e3; Terminal Finish: TIN;
BTS4880RAUMA1
BTS4880RAUMA1 by Infineon Technologies is a Peripheral Driver with 8 functions, operating at supply voltages b/w 11V to 45V. It offers built-in protections against transient, over current, over voltage, thermal, and under voltage conditions. This small outline driver has a turn-on time of 100us and turn-off time of 150us, making it suitable for various industrial applications requiring sink output current flow direction.
XSN6507DGQR
Texas Instruments
XSN6507DGQR by Texas Instruments is a peripheral driver with a max supply voltage of 36V and nominal output peak current limit of 1.3A. It operates in temperatures ranging from -55°C to 125°C, making it suitable for various industrial applications requiring high-performance buffer or inverter-based interface ICs.
IRS2011SPBF
International Rectifier
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
FAN7390MX
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ULN-2064B
Vishay Sprague
Vishay Sprague's ULN-2064B is a 16-terminal peripheral driver with bipolar technology. It operates b/w -20°C to 85°C, featuring tin/lead finish and through-hole terminals. Ideal for applications requiring a 4-bit driver in an in-line rectangular package.
TPS22965TDSGRQ1
TPS22965TDSGRQ1 by Texas Instruments is an 8-terminal peripheral driver with a supply voltage range of 2.5V to 5.5V and operating temperature from -40°C to 105°C. It features built-in transient protection, no-lead terminal form, and source/sink current flow direction. Ideal for industrial applications requiring buffer or inverter-based interface ICs in compact spaces due to its small outline package style.
BSP75NTA
Zetex Plc
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: SOP; Package Shape: RECTANGULAR; Turn-off Time: 20 us;
VN5016AJTR-E
VN5016AJTR-E by STMicroelectronics is a peripheral driver with 36V max supply voltage, 4.5V min supply voltage, and built-in protections for various faults. It is used as a buffer or inverter-based peripheral driver in applications requiring a source output current flow direction.
VNQ5050AKTR-E
STMicroelectronics' VNQ5050AKTR-E is a 24-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates within a supply voltage range of 4.5V to 36V and has a turn-on time of 20us. Ideal for applications requiring source output current flow direction in compact designs.
VN5050AJ-E
STMicroelectronics' VN5050AJ-E is a peripheral driver with 36V max supply voltage, built-in protections, and 12 terminals. Its small outline package suits applications needing buffer or inverter-based drivers for source current flow direction. Ideal for systems requiring transient, overcurrent, overvoltage protection in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TLE8104EXUMA2
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: HSOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
TLE8718SAAUMA4
TLE8718SAAUMA4 by Infineon is a 36-terminal peripheral driver with built-in protections for over/under voltage and current. It operates b/w -40 to 150 °C, with a max supply voltage of 5.5 V and output characteristics in open-drain format. Ideal for applications requiring buffer or inverter-based interface ICs, it has a turn-on/off time of 15 us and nominal output peak current limit of 4 A.
TLE824533SAAUMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 36; Package Code: HSSOP; Package Shape: RECTANGULAR; Built-in Protections: TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL;
TLE8110EDXUMA1
TLE8110EDXUMA1 by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates at a nominal voltage of 5V and has a max output peak current limit of 1.7A. This small outline package is ideal for automotive applications requiring sink output current flow direction.
TLE82092SAAUMA1
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: HSOP; Package Shape: RECTANGULAR;
TLE8108EMXUMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: HLSSOP; Package Shape: RECTANGULAR; Built-in Protections: TRANSIENT; OVER CURRENT; THERMAL;
TLE8110EEXUMA2
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 36; Package Code: HSSOP; Package Shape: RECTANGULAR; Nominal Output Peak Current Limit: 1.7 A;
TLE84110ELXUMA1
HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: HLSSOP; Package Shape: RECTANGULAR; Qualification: Not Qualified;
TLE8209-2SA
TLE8209-4SA
HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
TLE82094SACUMA1
HALF BRIDGE BASED PERIPHERAL DRIVER; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
TLE8110ED
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 36; Package Code: HSSOP; Package Shape: RECTANGULAR; Additional Features: O/P CURRENT FOR CH(1-4) IS 1.5 AMP, CH(7-10) IS 0.75 AMP; NO OF FUNCTIONS= 10;
TLE8104EXUMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: HSOP; Package Shape: RECTANGULAR; Turn-off Time: 10 us;
TLE8110EE
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 36; Package Code: SSOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
TLE82452-3SA
HALF BRIDGE BASED PERIPHERAL DRIVER; Moisture Sensitivity Level (MSL): 3;
TLE8110EEXUMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 36; Package Shape: RECTANGULAR; Nominal Output Peak Current Limit: 1.7 A; Package Style (Meter): SMALL OUTLINE;
TLE8108EM
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: HLSSOP; Package Shape: RECTANGULAR; JESD-609 Code: e3;
TLE8116SA
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 36; Package Code: SSOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G36;
TLE8102SGAUMA1
TLE8102SGAUMA1 by Infineon Technologies is a peripheral driver with 2 functions, operating at 4.5-5.5V, suitable for automotive applications. It offers built-in transient and thermal protections, with a max output peak current limit of 6.5A and turn-on/off time of 50us, in a small outline package measuring 7.5mm x 6.4mm x 2.6mm.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved