Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FDC6329L by Onsemi is a small outline peripheral driver with 6 terminals and built-in transient protection. It has a max output peak current limit of 1.9A, operates as a buffer or inverter, and is ideal for source current flow applications. The package dimensions are 2.9mm x 1.6mm x 1.22mm, making it suitable for compact electronic designs requiring surface mount components.
Median Price
$0.399
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Newark
1+ parts
$0.735
100+ parts
$0.412
1k+ parts
$0.353
10k+ parts
$0.339
DigiKey
$0.750
$0.420
$0.361
-
Mouser Electronics
$0.408
$0.355
$0.333
Adafruit Industries
$10.796
$9.824
$8.853
Element14
$0.706
$0.512
$0.491
Arrow
$0.323
Verical
Farnell
$0.303
Master Electronics
$0.372
$0.332
$0.316
Chip1Stop
$0.282
Rochester
$0.331
$0.295
Digiode
$0.325
Nova Conductors
$0.763
American Microsemiconductor Inc.
$3.890
Chip Stock
Cyclops Electronics Ltd
Dan-Mar Components
Vyrian
NAC Semi
$0.873
IBS Electronics
$0.494
$0.452
$0.418
Bristol Electronics
LIBRA Elektronik GmbH
LWI Electronics Inc
Corel Iberica Componentes, S.L.
Prism Electronics
ACDS - Activité Composants Distribution Service
Semicontronic
$0.251
$0.245
$0.243
Ampacity Inc.
Corohmni
Corphita
$0.308
Continental Prestige Electronics
$0.748
Argo Parts USA
Andel Nordic
$2.282
$2.190
Advanced Electronics
Aztec Data Supply Inc.
$11.447
Infinite Electronics LLP (Excess)
Perfect Parts
Metaverse IC Inc.
RC Electronics
$0.410
$0.370
$0.360
QUARKTWIN TECHNOLOGY LTD
ChipstoGo Electronic ltd
Kulean Microsystems
SupplyDigital Components
GreenTree Electronics
Authorized Procurement Solutions
Benley Electronics
Problanco Electronics
S.R.D Solutions
iodParts Technologies Inc.
Netroflash
$0.725
$0.710
A-Z Elektronik GmbH
TANS Electronics
Futuretech Components
Alle Elektronik GmbH
Speed Components Ltd (Excess)
Supply Digital
Robosynatics
$10.918
$10.695
Lucentia Tech
Assy Fe
Kepictronics
UHIMA Technologies
The use of plastic/epoxy material makes the product lightweight and durable, ensuring long-term usability.
Being surface mountable allows for easy and efficient installation on circuit boards, saving time and effort.
The built-in transient protections ensure the safety and reliability of connected devices by safeguarding against sudden voltage spikes.
With 6 terminals, this peripheral driver offers multiple connection points for integrating various devices or components in a circuit.
The matte tin finish on the terminals provides corrosion resistance and ensures stable electrical connections for improved performance.
The compact width of 1.6 mm allows for space-efficient placement on the circuit board, ideal for applications with limited space.
The output current flow direction being sourced makes it suitable for driving devices that require source-type drivers, enhancing compatibility.
Peripheral Drivers FDC6329L attributes and parameters. Explore more Peripheral Drivers devices from Onsemi
Built-in Protections:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Output Current Flow Direction:
Nominal Output Peak Current Limit:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
FDC6329L Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
5962-01-607-2849, 5962016072849
NIIN
016072849
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Itt Semiconductor
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDLL4148
Synsemi
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
1N4148WS
Tak Cheong Electronics Holdings
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
VN800S-E
STMicroelectronics
STMicroelectronics' VN800S-E is a peripheral driver with 8-36V power supplies, built-in protections, and source output current flow. Its compact rectangular package is ideal for applications requiring transient, over current, over voltage, thermal, and under voltage protection in various electronic systems.
BTS432E2E3043
Infineon Technologies
BTS432E2E3043 by Infineon is a MOS technology peripheral driver with 5 terminals and built-in protections. It operates at supply voltages ranging from 4.5V to 42V, offering a nominal output peak current limit of 44A. This rectangular package is ideal for applications requiring source output current flow direction and fast turn-on/off times.
LM3526MX-L/NOPB
National Semiconductor
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ULN-2064B
Sprague Electric
Peripheral Drivers; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
ITS4200SMEPHUMA1
ITS4200SMEPHUMA1 by Infineon is a peripheral driver with 4 terminals, operating voltage range of 11-45V, and built-in protections for transient, over/under voltage & current. It has a small outline package suitable for automotive applications, featuring Schmitt trigger input characteristics and sink output current flow direction.
LMD18200-2D/883
Texas Instruments
LMD18200-2D/883 by Texas Instruments is a MIL-STD-883 compliant peripheral driver with a max supply voltage of 55V and built-in protections for transient, thermal, and under-voltage. This rectangular package style IC has 24 terminals, operates in military temperature grades (-55 to 125 °C), and can handle a max output current of 6A. Ideal for applications requiring high power motor control or robotics due to its BCDMOS technology and PWM interface.
L6377D
L6377D by STMicroelectronics is a peripheral driver with a max supply voltage of 35V and a max output current of 0.5A. It is commonly used as a buffer or inverter based peripheral driver for various applications.
VNB35NV04TR-E
VNB35NV04TR-E by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, over voltage, and thermal issues. It operates at a nominal voltage of 5V and has a peak reflow temperature of 260°C. This small outline heat sink package is ideal for applications requiring sink output current flow direction in a compact form factor.
A2982SLWTR-T
Allegro MicroSystems
A2982SLWTR-T by Allegro MicroSystems is a peripheral driver with 8 functions. It has a small outline package style and can handle a max output current of 0.35A. This IC type is commonly used as a buffer or inverter based peripheral driver.
ULN2003A
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Minimum Operating Temperature: -20 Cel;
BTT61002ERAXUMA1
BTT61002ERAXUMA1 by Infineon Technologies is a peripheral driver with a max supply voltage of 36V. It has built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This small outline heat sink package is suitable for applications requiring buffer or inverter based interface ICs.
BTS3408G
BTS3408G by Infineon is a MOS technology peripheral driver with 60V max supply voltage, built-in protections for transient, over current, and over voltage. It has 8 terminals in small outline package style suitable for automotive applications meeting AEC-Q100 standards.
TPIC6B595DWRG4
TPIC6B595DWRG4 by Texas Instruments is an 8-bit register-based peripheral driver with a max supply voltage of 5.5V and output current flow direction as sink. It has built-in transient protections, operates in automotive temperature grade range (-40 to 125 °C), and is ideal for applications requiring open-drain output characteristics.
BTS432E2E3062AXT
BTS432E2E3062AXT by Infineon: MOS tech, 42V max supply, 44A peak current limit. Applicable as a buffer/inverter-based peripheral driver for various applications requiring source output flow direction control.
BTS452R
BTS452R by Infineon Technologies is a MOS technology peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 150 °C with a supply voltage range of 6-52 V. This rectangular package is ideal for automotive applications requiring source and sink output current flow direction.
TPS22925BYPHR
TPS22925BYPHR by Texas Instruments is a peripheral driver with max supply voltage of 3.6V, min supply voltage of 0.65V, and output current flow in both directions. It is used in industrial applications requiring built-in transient protections and operates b/w -40 to 105 °C.
VN920SPTR-E
STMicroelectronics' VN920SPTR-E is a peripheral driver with 36V max supply voltage, 30A max output current, and built-in protections. Ideal for applications requiring transient, over current, over voltage protection. Package style: small outline, heat sink/slug; interface IC type: buffer or inverter based peripheral driver.
UDN2987A
Allegro MicroSystems' UDN2987A is an 8-function peripheral driver with a max supply voltage of 35V. It offers built-in protections against transient, over current, and thermal issues. Ideal for applications requiring a true output polarity and a max output current of 0.35A.
L6203
STMicroelectronics L6203 is a full bridge peripheral driver with 48V max supply voltage, built-in transient and thermal protections. Ideal for applications requiring source and sink output current flow direction, it features 11 terminals in a rectangular package style with through-hole terminal form.
BTS442E2E3062A
BTS442E2E3062A by Infineon is a MOS technology peripheral driver with 4.5-42V supply, 70A output current limit, and built-in protections. It has a small outline package style for surface mount applications. Ideal for controlling high-power loads in automotive and industrial systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FDC6330L
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR;
FDC6330L by Onsemi is a CMOS technology peripheral driver with 6 terminals and built-in transient protection. It operates b/w -55 to 150 °C, with a max output current of 2.3 A. Ideal for military-grade applications requiring a small outline, low profile package style.
FDC6331L
FDC6331L by Onsemi is a small outline, low profile peripheral driver with 6 terminals. It operates at a nominal voltage of 6.4V and has built-in transient protections. With a max output peak current limit of 9A, it is ideal for half bridge based applications requiring source and sink current flow control.
FDC6324L
FDC6324L by Onsemi is a small outline peripheral driver with 6 terminals. It features built-in transient protection, NMOS technology, and a peak output current limit of 1A. Ideal for applications requiring source flow direction such as buffer or inverter based interface ICs.
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Qualification: Not Qualified;
FDC6330L_NL
FDC6330L_NL by Fairchild Semiconductor is a CMOS peripheral driver with 6 terminals, 2.3A output current, and built-in transient protection. It operates in temperatures ranging from -55 to 150°C and is ideal for military-grade applications requiring a low-profile, small outline package with source current flow direction.
FDC6324L_NL
Fairchild Semiconductor's FDC6324L_NL is a Peripheral Driver with 6 terminals, 3/20V power supplies, and built-in transient protection. It features a small outline package style for compact designs. Ideal for applications requiring buffer or inverter-based peripheral drivers with source current flow direction.
FDC6323L
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; No. of Functions: 1;
FDC6323L by Onsemi is a small outline, low profile peripheral driver with 6 terminals and built-in transient protection. It features a max output peak current limit of 1A and operates as a buffer or inverter-based driver. Ideal for applications requiring source output current flow direction in compact spaces.
FDC6323L_NL
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Output Current Flow Direction: SOURCE;
FDC6325L
FDC6325L by Onsemi is a MOS technology peripheral driver with a max output current of 1.8A. It is a small outline package with 6 terminals and can be used as a buffer or inverter based peripheral driver for various applications.
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Terminal Finish: MATTE TIN;
FDC6325L_NL
FDC6324LD87Z
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Width: 1.6 mm;
FDC6330LD87Z
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Length: 2.92 mm;
FDC6323LD87Z
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Terminal Position: DUAL;
FDC6901L
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; No. of Functions: 1;
FDC6332L
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
FDC6332L_NL
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G6;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved