Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FDC6331L by Onsemi is a small outline, low profile peripheral driver with 6 terminals. It operates at a nominal voltage of 6.4V and has built-in transient protections. With a max output peak current limit of 9A, it is ideal for half bridge based applications requiring source and sink current flow control.
Median Price
$0.355
Lifecycle Status
Suppliers In-Stock
38
In-Stock Inventory
1k+
Newark
1+ parts
$0.209
100+ parts
1k+ parts
-
10k+ parts
Arrow
$0.497
$0.313
$0.265
$0.255
DigiKey
$0.610
$0.335
$0.286
$0.261
Mouser Electronics
$0.620
$0.380
$0.356
Adafruit Industries
$4.148
$3.940
Element14
$0.417
$0.396
Verical
$0.298
Rochester
$0.323
$0.268
$0.239
Farnell
$0.359
$0.342
Future Electronics
Avnet
RS (Exports)
$0.269
$0.264
Chip1Stop
$0.332
$0.259
Master Electronics
$0.227
$0.223
$0.210
Nova Conductors
$0.352
Maritex
$0.386
$0.207
$0.195
$0.176
TME
$0.590
$0.339
Digiode
$0.684
IBS Electronics
$1.431
$0.617
NAC Semi
$0.720
Chip Stock
Vyrian
Velocity Electronics
Electro Sonic
$0.247
Cyclops Electronics Ltd
Bristol Electronics
QIE Inc.
Avant Electronics Limited
ComSIT Distribution GmbH
ComSIT USA
R&J Components
Semtec, LLC
Goldney Electronics S.L.
North Shore Components
Sensible Micro Corp
Prism Electronics
Semi Source
Classic Components Corporation
Ampacity Inc.
$0.190
Semicontronic
$0.185
$0.184
Corohmni
$0.237
Argo Parts USA
$0.325
Continental Prestige Electronics
$0.328
Corphita
$0.648
Microchip USA
$1.898
Advanced Electronics
Modulus Dynamics
$10.920
Aztec Data Supply Inc.
$12.154
Perfect Parts
RC Electronics
$0.330
$0.300
$0.290
GreenTree Electronics
Kepictronics
Problanco Electronics
SupplyDigital Components
iodParts Technologies Inc.
$0.453
TANS Electronics
Lixinc
S.R.D Solutions
Robosynatics
$7.395
$7.244
Lucentia Tech
Kulean Microsystems
Supply Digital
Futuretech Components
A-Z Elektronik GmbH
Infinite Electronics LLP (Excess)
Alle Elektronik GmbH
Authorized Procurement Solutions
UHIMA Technologies
Netroflash
$0.345
$0.334
$0.327
This material is lightweight and durable, making the product easy to handle and resistant to damage during use.
Allows for easy and efficient installation on circuit boards, saving time and effort in the manufacturing process.
Can handle higher voltage inputs, providing versatility in a variety of applications.
Offers protection against sudden voltage spikes or fluctuations, ensuring the stability and longevity of the device.
Provides multiple connection points for integrating the peripheral driver into the circuit, enhancing flexibility and functionality.
Low profile design allows for compact and space-saving installation in tight setups or applications with limited space.
Can handle high peak current loads, making it suitable for driving various peripherals or components requiring higher power.
Half bridge design provides efficient power delivery and control, ensuring optimal performance of connected peripherals.
Ability to both source and sink current allows for bidirectional control of connected peripherals, enhancing versatility and functionality.
Peripheral Drivers FDC6331L attributes and parameters. Explore more Peripheral Drivers devices from Onsemi
Built-in Protections:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Output Current Flow Direction:
Nominal Output Peak Current Limit:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
FDC6331L Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
5961-01-643-1227, 5961016431227
NIIN
016431227
PCN Design/Specification - Marking Change 17/Nov/2021 Marking Change 07/Oct/2022
PCN Assembly/Origin - Capacity Expansion 26/Oct/2020
PCN Packaging - Binary Year Code Marking 15/Jan/2014 Marking Change 07/Oct/2022
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Brightking
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
Lite-on Semiconductor
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
BSS138-7-F
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
Micropac Industries
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BAV99-7-F
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
General Instrument
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FPF2108
Onsemi
FPF2108 by Onsemi is a MOS technology-based peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates b/w -40 to 85 °C with a supply voltage range of 1.8-5.5 V and max output current of 0.8 A. Ideal for industrial applications requiring a compact form factor and source flow direction.
VNQ7003SYTR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
VNI4140KTR-32
VNI4140KTR-32 by STMicroelectronics is a 24V peripheral driver with 4 bits, suitable for BUFFER OR INVERTER BASED applications. It features a small outline package with dual terminals and matte tin finish. The device has a peak reflow temperature of 260°C and moisture sensitivity level of MSL3.
VN808CMTR-32-E
STMicroelectronics' VN808CMTR-32-E is a peripheral driver with 8 functions, operating at supply voltages of 10.5V to 32V. It offers built-in thermal and under voltage protections, suitable for automotive applications with a temperature range from -40°C to 125°C. The driver has a small outline package style, source output current flow direction, and turn-on/off times of 100us and 150us respectively.
HCPL-316J
Agilent Technologies
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
BSP452
Infineon Technologies
BSP452 by Infineon is a MOS technology-based peripheral driver with 4 terminals and built-in protections for over/under voltage. It operates at supply voltages ranging from 5V to 34V, making it suitable for automotive applications requiring a nominal output peak current limit of 0.7A. The small outline package style with gull wing terminal form enables surface mount installation in compact spaces.
UCC23513DWYR
Texas Instruments
UCC23513DWYR by Texas Instruments is a peripheral driver with built-in transient and under voltage protections. It operates in industrial temperature range (-40 to 115°C) and can handle a max output current of 4.5A. With Schmitt trigger input characteristics, it serves as a buffer or inverter based peripheral driver for various applications.
MIC5841YWM
MIC5841YWM by Microchip Technology is an 8-bit SIPO-based peripheral driver with a max supply current of 16mA. It operates in industrial temperature range (-40 to 85°C) and has built-in transient protection. This rectangular small outline package is ideal for applications requiring inverted output polarity and sink current flow direction.
ITS724GXT
ITS724GXT by Infineon Technologies is a Peripheral Driver with 4 functions, operating voltage range of 5.5V to 40V, and built-in protections for transient, over current, over voltage, thermal, and under voltage. This small outline package IC is ideal for applications requiring sink output current flow direction and interface buffer or inverter based peripheral driver type.
TPIC6273DWRG4
TPIC6273DWRG4 by Texas Instruments is a latch-based peripheral driver with 8 channels, 2A output peak current limit, and inverted output polarity. It operates in automotive-grade temperatures (-40 to 125°C) and has built-in transient protections. Ideal for applications requiring open-drain outputs such as automotive electronics.
AUIPS6041GTR
International Rectifier
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NUD3112DMT1G
NUD3112DMT1G by Onsemi is a Peripheral Driver with 2 functions, offering transient protection. It operates in industrial temperature range (-40 to 85°C) and has a max output current of 0.5A. Ideal for applications requiring buffer or inverter based peripheral drivers with sink output current flow direction.
IRS2103PBF
IRS2103PBF by Infineon is a CMOS half-bridge peripheral driver with 15V nominal voltage. It offers built-in transient and under-voltage protections, operates b/w -40 to 125 °C, and has a turn-on time of 0.82 us. Widely used in automotive applications due to its compact IN-LINE package style and source/sink output current flow direction.
SI1040X-T1-GE3
Vishay Intertechnology
SI1040X-T1-GE3 by Vishay Intertechnology is a Peripheral Driver with 6 terminals, 8A output current, and built-in transient protection. It operates at supply voltages ranging from 1.8V to 8V and is ideal for buffer or inverter-based interface IC applications requiring source and sink current flow control.
VN750PS-E
VN750PS-E by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates within a supply voltage range of 5.5V to 36V and can handle a max output current of 2A. This small outline package is ideal for applications requiring source output current flow direction and quick turn-on/off times.
TPS4H000AQPWPRQ1
TPS4H000AQPWPRQ1 by Texas Instruments is a Peripheral Driver with 4 functions, operating at -40 to 125 °C. It has built-in protections for transient, over current, thermal & under voltage. Ideal for automotive applications due to AEC-Q100 screening & high side driver feature.
BTS141TCBUMA1
BTS141TCBUMA1 by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It has a nominal output peak current limit of 35A and turn-on time of 40us. This small outline package driver is ideal for applications requiring sink output current flow direction.
BTS3405GXUMA1
BTS3405GXUMA1 by Infineon Technologies is a peripheral driver with built-in protections for transient, over voltage, and thermal conditions. It has 8 terminals in a small outline package style, with a nominal voltage of 12V and a max seated height of 1.75mm. This interface IC type is suitable for buffer or inverter based applications requiring a turn-on time of 38us and turn-off time of 45us.
Broadcom
HCPL-316J by Broadcom is a peripheral driver with a max supply voltage of 5.5V and built-in protections against over current, over voltage, under voltage, and transient. It has a small outline package style and is suitable for industrial applications requiring buffer or inverter based interface ICs with a nominal output peak current limit of 2.5A.
LM3525MX-H/NOPB
LM3525MX-H/NOPB by Texas Instruments is a peripheral driver with 8 terminals, operating voltage range of 2.7V to 5.5V, and built-in protections for transient, over current, thermal, and under voltage. It has an output current limit of 1A and is ideal for automotive applications due to its temperature grade.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FDC6330L
Fairchild Semiconductor
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR;
FDC6330L by Onsemi is a CMOS technology peripheral driver with 6 terminals and built-in transient protection. It operates b/w -55 to 150 °C, with a max output current of 2.3 A. Ideal for military-grade applications requiring a small outline, low profile package style.
FDC6324L
FDC6324L by Onsemi is a small outline peripheral driver with 6 terminals. It features built-in transient protection, NMOS technology, and a peak output current limit of 1A. Ideal for applications requiring source flow direction such as buffer or inverter based interface ICs.
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Qualification: Not Qualified;
FDC6330L_NL
FDC6330L_NL by Fairchild Semiconductor is a CMOS peripheral driver with 6 terminals, 2.3A output current, and built-in transient protection. It operates in temperatures ranging from -55 to 150°C and is ideal for military-grade applications requiring a low-profile, small outline package with source current flow direction.
FDC6329L
FDC6329L by Onsemi is a small outline peripheral driver with 6 terminals and built-in transient protection. It has a max output peak current limit of 1.9A, operates as a buffer or inverter, and is ideal for source current flow applications. The package dimensions are 2.9mm x 1.6mm x 1.22mm, making it suitable for compact electronic designs requiring surface mount components.
FDC6324L_NL
Fairchild Semiconductor's FDC6324L_NL is a Peripheral Driver with 6 terminals, 3/20V power supplies, and built-in transient protection. It features a small outline package style for compact designs. Ideal for applications requiring buffer or inverter-based peripheral drivers with source current flow direction.
FDC6323L
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; No. of Functions: 1;
FDC6323L by Onsemi is a small outline, low profile peripheral driver with 6 terminals and built-in transient protection. It features a max output peak current limit of 1A and operates as a buffer or inverter-based driver. Ideal for applications requiring source output current flow direction in compact spaces.
FDC6323L_NL
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Output Current Flow Direction: SOURCE;
FDC6325L
FDC6325L by Onsemi is a MOS technology peripheral driver with a max output current of 1.8A. It is a small outline package with 6 terminals and can be used as a buffer or inverter based peripheral driver for various applications.
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Terminal Finish: MATTE TIN;
FDC6325L_NL
FDC6324LD87Z
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Width: 1.6 mm;
FDC6901L
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; No. of Functions: 1;
FDC6332L
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
FDC6332L_NL
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G6;
FDC6901L_NL
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Nominal Output Peak Current Limit: 3 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved