Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Vishay Sprague's ULN-2803LW is an 8-bit peripheral driver with a max supply voltage of 3V. It features open-collector output characteristics and built-in transient protections. Ideal for applications requiring sink current flow direction, this small outline package driver operates b/w -20°C to 85°C temperatures.
Median Price
-
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
J2 Sourcing AB
1+ parts
100+ parts
1k+ parts
10k+ parts
Digital Electronic Gebert Verwaltungs UG
Vyrian
ComSIT Distribution GmbH
ComSIT USA
A2Z Electronics, Inc.
Nova Conductors
Q Components
Manoshevitz Elec. Sales
Vectronix, Inc
North Shore Components
Beltway Electronics Company
Zilex Electronics Inc.
ECAB
LittleDiode
J & M Industries LLC
Semtec, LLC
Classic Components Corporation
Rebound Electronics
Carlin Systems, Inc.
ACDS - Activité Composants Distribution Service
Legend Electronics Inc.
NexGen Digital
Semi Source
Corohmni
$0.860
Aztec Data Supply Inc.
$9.860
Semicontronic
$10.500
$10.238
$10.185
AZTECH Wire
$18.528
Ampacity Inc.
$46.500
Continental Prestige Electronics
Argo Parts USA
Kepictronics
Robosynatics
Modulus Dynamics
Bastille Electronics
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
The use of plastic/epoxy as the package body material makes the product lightweight yet durable, ensuring easy handling and long-lasting performance.
Being surface mountable allows for easy integration into various electronic circuits and PCB designs, making it convenient for assembly and space-saving.
The maximum supply voltage of 3 V ensures compatibility with a wide range of applications, providing flexibility in use.
With 8 functions available, this peripheral driver offers versatility and can support multiple tasks or components within a system.
The built-in transient protection helps safeguard the driver and connected components from voltage spikes or surges, enhancing reliability and safety.
Having 18 terminals allows for connection to various input and output devices, enabling versatility and compatibility with different systems.
The high maximum operating temperature of 85°C ensures the driver can perform reliably in demanding environmental conditions without overheating.
The open-collector output configuration provides flexibility in connecting to different types of loads or devices, making it versatile for a range of applications.
The low minimum operating temperature of -20°C allows the driver to function effectively in cold environments, ensuring reliable operation in various conditions.
The dual terminal position enhances convenience in installation and connection, making it easier to integrate the driver into different circuit layouts.
The compact maximum seated height of 2.65 mm ensures the driver occupies minimal space on the PCB, contributing to efficient use of board real estate.
The narrow width of 7.5 mm makes the driver suitable for space-constrained designs, enabling compact and streamlined electronic systems.
The moderate length of 11.55 mm balances between compactness and functionality, allowing for a versatile and adaptable form factor.
The gull wing terminal form facilitates easy soldering and reliable connection, ensuring secure attachment to the PCB for stable operation.
The low maximum supply current of 1.35 mA helps in minimizing power consumption, making the driver energy-efficient and suitable for battery-powered applications.
The quick turn-on time of 1 microsecond ensures rapid response and efficient operation, enhancing the driver's performance in time-critical applications.
The standard terminal pitch of 1.27 mm allows for compatibility with common PCB layouts and facilitates easy integration into various electronic systems.
The 8-bit driver configuration provides precise control and processing capability, making it suitable for applications that require handling multiple bits of data.
The buffer or inverter based interface IC type offers flexibility in signal processing and communication, enabling compatibility with a range of devices and systems.
The fast turn-off time of 1 microsecond ensures quick response and efficient operation, enhancing the driver's performance in dynamic and time-sensitive applications.
The sink output current flow direction allows for easy interfacing with devices that require current sinking, enhancing compatibility and functionality in various circuit configurations.
Peripheral Drivers ULN-2803LW attributes and parameters. Explore more Peripheral Drivers devices from Vishay Sprague
Built-in Protections:
Driver No. of Bits:
Interface IC Type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Characteristics:
Output Current Flow Direction:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Maximum Supply Current:
Maximum Supply Voltage:
Surface Mount:
Terminal Form:
Terminal Pitch:
Terminal Position:
Turn-off Time:
Turn-on Time:
Width:
ULN-2803LW Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Vishay Sprague is well known for having invented the first tantalum capacitors and the first surface-mount tantalum chip capacitors. Vishay Sprague continues this commitment to innovation today through the ongoing development of higher performance tantalum capacitors in a wide range of sizes. Vishay Sprague has the broadest range of tantalum capacitors offered by any manufacturer with devices that also include conformal coated and molded surface-mount styles, as well as both radial and axial through-hole products, covering a wide range of automotive, consumer, industrial, and telecommunications as well as very high-performance applications. Vishay acquired its tantalum capacitor division from Sprague in 1992, which was founded in 1926 by Robert Sprague, founder of the “tone control” capacitor. Vishay subsequently reinforced its position in the marketplace by acquiring tantalum operations from a number of other brands
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Kingwell Technonlogy
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
Rochester Electronics
M85049/85-08W02
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
TPS1H100BQPWPRQ1
Texas Instruments
TPS1H100BQPWPRQ1 by Texas Instruments is a high side driver with built-in protections for transient, over current, thermal, and under voltage. It operates at a max supply voltage of 40V and has a nominal output peak current limit of 7A. Ideal for automotive applications due to its AEC-Q100 screening level and compact rectangular package design.
TBD62083AFWG(Z,EHZ)
Toshiba
Toshiba TBD62083AFWG(Z,EHZ) is a Peripheral Driver with 8 functions, 18 terminals, and built-in transient protection. It operates b/w -40 to 85 °C with a supply voltage range of 2.5V to 25V. Ideal for industrial applications requiring buffer or inverter-based peripheral drivers with sink output current flow direction.
L293DD013TR
L293DD013TR by STMicroelectronics is a 20-terminal peripheral driver with a max supply voltage of 36V. It features built-in thermal protection and offers a nominal output peak current limit of 1.2A. Ideal for applications requiring source and sink output current flow direction, such as buffer or inverter-based interface ICs.
VNQ660SP-E
STMicroelectronics' VNQ660SP-E is a MOS technology peripheral driver with 6A output current, suitable for 6-24V power supplies. It features a small outline package with 10 terminals in gull wing form, ideal for surface mount applications.
ITS4200SMENHUMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e3;
BTS442E2E3062AXT
BTS442E2E3062AXT by Infineon Technologies is a peripheral driver with a max supply voltage of 42V. It offers built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This MOS technology-based device has a nominal output peak current limit of 70A and is commonly used as a buffer or inverter based peripheral driver.
MIC5841YWM-TR
Micrel
SIPO BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR;
IRS2304SPBF
International Rectifier
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SSOP; Package Shape: RECTANGULAR;
VN330SP-E
STMicroelectronics VN330SP-E is a 4-function peripheral driver with built-in protections. It operates at supply voltages b/w 10-36V, suitable for automotive applications. With a max output current of 0.5A and turn-on/off times of 60/40us, it offers reliable performance in compact dimensions (9.4x7.5x3.75mm).
VN751PT
VN751PT by STMicroelectronics is a Peripheral Driver with 5 terminals, operating voltage range of 5.5V to 36V, and built-in transient protection. It has a small outline package style suitable for automotive applications, with a max temperature of 125°C. The device offers a nominal output peak current limit of 2.5A and operates as a buffer or inverter-based peripheral driver with source flow direction.
BTS70021EPPXUMA1
BTS70021EPPXUMA1 by Infineon is a peripheral driver with 14 terminals, offering built-in protections against over/under voltage and thermal issues. It operates at supply voltages ranging from 6V to 18V, making it suitable for automotive applications requiring a nominal output peak current limit of 2.1A. The compact rectangular package style with gull wing terminal form ensures efficient heat dissipation in space-constrained environments.
IRS2103PBF
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ULN2065B
Allegro MicroSystems
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
ISP752TFUMA1
Infineon's ISP752TFUMA1 is a Peripheral Driver with 8 terminals, offering built-in protections for over current, over voltage, thermal, and under voltage. It operates b/w -30 to 85 °C with a supply voltage range of 6-52 V. Ideal for applications requiring a small outline package style and source output current flow direction.
VND5160AJTR-E
VND5160AJTR-E by STMicroelectronics is a Peripheral Driver with 36V max supply voltage, 4.5V min supply voltage, and 13V nominal voltage. It features built-in protections for transient, over current, over voltage, thermal, and under voltage applications in various electronic systems. This CMOS technology driver has a turn-on time of 10us and turn-off time of 15us suitable for BUFFER OR INVERTER BASED PERIPHERAL DRIVER interface IC types.
ULN2004ANSRG4
ULN2004ANSRG4 by Texas Instruments is a 7-bit buffer/inverter-based peripheral driver with open-collector output. It operates b/w -20°C to 70°C, has a max supply voltage of 8V, and built-in transient protection. Ideal for applications requiring sink current flow direction in compact designs due to its small outline package style.
ULN2004ADRG3
ULN2004ADRG3 by Texas Instruments is a 7-function peripheral driver with built-in transient protection. It operates b/w -20 to 70°C, with a max supply voltage of 8V and current of 1.35mA. Ideal for applications requiring buffer or inverter-based interface ICs in compact spaces due to its small outline package style.
BSP742RXUMA1
BSP742RXUMA1 by Infineon Technologies is a Peripheral Driver with 8 terminals and built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at a nominal voltage of 13.5 V and has a max supply voltage of 34 V. This small outline package driver is ideal for applications requiring buffer or inverter based peripheral drivers with a sink output current flow direction.
L293NE
L293NE by Texas Instruments is a peripheral driver with 2 functions, operating at 4.5-36V. It offers built-in transient and thermal protections, with a max output current of 2A. Ideal for applications requiring true output polarity control in commercial temperature environments.
NCP51810AMNTWG
Onsemi
HALF BRIDGE BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; Terminal Finish: NICKEL PALLADIUM GOLD; Peak Reflow Temperature (C): 260; JESD-609 Code: e4;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ULN2803ADWR
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
ULN2803ADWRG4
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
ULN2803ADWG4
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
ULN2803A
Youtai Semiconductor
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
ULN2003ADR2G
ULN2003ADR2G by Onsemi is a 16-terminal peripheral driver with open-collector output polarity. It operates b/w -20 to 85°C, suitable for various applications requiring inverted output characteristics and sink current flow direction. This small outline package IC is ideal for buffer or inverter-based interface designs at a nominal voltage of 50V.
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Output Polarity: INVERTED;
ULN2803AN
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR; No. of Functions: 1;
Peripheral Drivers; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
Taejin Technology
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Shape: RECTANGULAR; Nominal Output Peak Current Limit: .5 A; No. of Functions: 1;
ULN2003D1013TR
STMicroelectronics ULN2003D1013TR is a 7-bit buffer/inverter peripheral driver with max supply voltage of 3V. It features open-collector output, transient protection, and sink current flow direction. Ideal for applications requiring fast turn-on/off times in a small outline package.
ULN2803CDWR
ULN2803CDWR by Texas Instruments is an 8-function peripheral driver with open-collector output characteristics. It has built-in transient protections and a nominal output peak current limit of 0.5A, making it ideal for applications requiring sink current flow direction such as motor control systems.
ULN-2003A
ULN-2003A by Sprague Electric is a 7-bit bipolar peripheral driver with a max output current of 0.35 A and nominal voltage of 50 V. It features a rectangular plastic/epoxy package, dual terminal position, and operates in temperatures ranging from 0 to 70°C. Ideal for driving various loads in commercial applications.
ULN2003A
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Driver No. of Bits: 7;
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Minimum Operating Temperature: -20 Cel;
Sgs-ates Componenti Electronici S P A
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; JESD-609 Code: e0;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved