Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 650 V; Terminal Form: NO LEAD; Package Shape: SQUARE;
Median Price
$1.060
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$1.040
1k+ parts
$0.863
10k+ parts
$0.770
Verical
$1.079
$0.962
Digiode
$0.808
Vyrian
Corphita
$0.765
Modulus Dynamics
$0.865
$0.830
$0.796
AZTECH Wire
$18.930
Power Field Effect Transistors (FET) IPL65R660E6AUMA1 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Infineon Technologies
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Pulsed Drain Current (IDM):
Surface Mount:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
IPL65R660E6AUMA1 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
1N4148
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1552200253
Molex
WIRE AND CABLE;
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148-GS08
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
LL4148
Taitron Components
Formosa Microsemi
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
IXTA96P085T
Littelfuse
The Littelfuse IXTA96P085T is a P-CHANNEL FET with 85V DS breakdown voltage and 96A max drain current. Ideal for switching applications, it features a built-in diode, 300A pulsed drain current, and 0.013 ohm max on resistance. Suitable for enhancement mode operation in high-power systems with an operating temperature range of -55 to 150°C.
IRLR3110ZTRPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 140 W; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Form: GULL WING;
2N7000
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .4 W; No. of Elements: 1; Terminal Finish: Matte Tin (Sn);
BSC190N15NS3GATMA1
Infineon Technologies
Infineon BSC190N15NS3GATMA1 is a N-CHANNEL FET with 150V DS breakdown voltage, ideal for switching applications. Features include 200A IDM, 170mJ EAS, and 0.019 ohm RDS(on). Operating from -55 to 150 °C, it has a max power dissipation of 125W in a small outline package.
FQD1N80TM
FQD1N80TM by Onsemi is a N-CHANNEL Power FET with 800V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max IDM of 4A and EAS of 90mJ, operating in ENHANCEMENT MODE. With a compact RECTANGULAR package and GULL WING terminals, it offers high performance in small outline designs at up to 150°C.
BS170
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .83 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; No. of Elements: 1;
BSP315PH6327
Infineon's BSP315PH6327 is a P-CHANNEL FET with 60V DS Breakdown Voltage and 4.68A IDM. Ideal for automotive applications, it features a built-in diode, 0.8 ohm RDS(on), and 24mJ EAS rating. AEC-Q101 compliant, this MOSFET has a small outline package and matte tin finish for enhanced performance in harsh environments.
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
IPA80R650CEXKSA2
Infineon's IPA80R650CEXKSA2 is a N-CHANNEL FET with 800V DS breakdown voltage, ideal for SWITCHING applications. Features include 24A IDM, 340mJ EAS, and 0.65 ohm RDS(on). Package style is FLANGE MOUNT with THROUGH-HOLE terminals.
RFD16N05LSM9A
RFD16N05LSM9A by Onsemi is a N-CHANNEL FET with 50V DS breakdown voltage, 16A max drain current, and 0.056 ohm max on resistance. Ideal for switching applications, it operates in enhancement mode with 45A pulsed drain current capability.
IRF640NSTRLPBF
Infineon's IRF640NSTRLPBF is a N-CHANNEL FET with 200V DS Breakdown Voltage, ideal for SWITCHING applications. It features 72A IDM, 247mJ EAS, and 0.15 ohm RDS(ON). Operating from -55 to 175 °C, this MOSFET has a max power dissipation of 150W in a small outline package.
CSD18543Q3AT
CSD18543Q3AT by Texas Instruments is an N-CHANNEL Power FET for SWITCHING applications. It has a 60V DS Breakdown Voltage, 156A Pulsed Drain Current, and 0.0156 ohm Drain-Source On Resistance. Ideal for high-power switching circuits in various electronic devices.
BSZ040N06LS5ATMA1
Infineon's BSZ040N06LS5ATMA1 is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 160A IDM, 117mJ EAS, and 0.004 ohm RDS(on). The transistor operates in ENHANCEMENT MODE and has a -55°C Min Operating Temp.
IRF540STRLPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 150 W; Transistor Element Material: SILICON; Package Body Material: PLASTIC/EPOXY;
IRFH5015TRPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 250 W; No. of Elements: 1; JESD-609 Code: e3;
FDMS86163P
FDMS86163P by Onsemi is a P-CHANNEL FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 100A and EAS of 486mJ, operating in ENHANCEMENT MODE. With a package style of SMALL OUTLINE and -55 to 150 °C temperature range, it offers high performance in power management systems.
DMG2305UX-13
Diodes Incorporated
DMG2305UX-13 by Diodes Inc. is a P-channel FET with 20V DS breakdown voltage and 4.2A max drain current, ideal for switching applications. It features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 1.4W. This MOSFET is surface mountable, with Gull Wing terminals and can withstand temperatures up to 150°C.
FDMS86263P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 104 W; Package Style (Meter): SMALL OUTLINE; Maximum Pulsed Drain Current (IDM): 70 A;
IRFP460LCPBF
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Transistor Application: SWITCHING; Maximum Operating Temperature: 150 Cel; Maximum Drain-Source On Resistance: .27 ohm;
Topaz Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e0; Maximum Operating Temperature: 150 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FQPF7N65C
IPL60R140CFD7AUMA1
Power Field-Effect Transistors; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 2A; Terminal Finish: TIN;
IPL60R095CFD7AUMA1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 147 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 2A;
IPL60R065P7AUMA1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Position: SINGLE; Package Style (Meter): SMALL OUTLINE; JESD-30 Code: S-PSSO-N4;
IPL60R199CPAUMA1
Infineon IPL60R199CPAUMA1 is a N-CHANNEL FET with 600V DS breakdown voltage, 51A IDM, and 0.199 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features built-in diode, small outline package, and operates up to 175°C.
IPL60R160CFD7AUMA1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 95 W; Package Style (Meter): SMALL OUTLINE; Operating Mode: ENHANCEMENT MODE;
IPL60R075CFD7AUMA1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 2A; No. of Elements: 1; Minimum DS Breakdown Voltage: 600 V;
IPL60R065C7AUMA1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Terminal Form: NO LEAD; Package Style (Meter): SMALL OUTLINE;
IPL60R104C7AUMA1
Infineon IPL60R104C7AUMA1 is a N-CHANNEL FET with 600V DS breakdown voltage, ideal for SWITCHING applications. Features include 83A pulsed drain current, 0.104 ohm max RDS(on), and 97mJ avalanche energy rating. Suitable for ENHANCEMENT MODE operation in various electronic devices.
IPL60R285P7AUMA1
Infineon Technologies' IPL60R285P7AUMA1 is a N-CHANNEL power FET with a min DS breakdown voltage of 600V. It is designed for switching applications, offering a max pulsed drain current of 36A and an avalanche energy rating of 38mJ.
IPL60R2K1C6SATMA1
Power Field-Effect Transistors; Moisture Sensitivity Level (MSL): 1;
IPL60R125C7AUMA1
Infineon IPL60R125C7AUMA1 is a N-CHANNEL FET with 600V DS breakdown voltage, ideal for switching applications. Features include 66A max pulsed drain current, 78mJ avalanche energy rating, and 0.125 ohm max drain-source resistance. Operates in -40 to 150 °C temperature range with a compact square package style.
IPL60R085P7AUMA1
Infineon IPL60R085P7AUMA1 is a N-CHANNEL FET with 600V DS breakdown voltage, 110A IDM, and 0.085 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features built-in diode, small outline package, and metal-oxide semiconductor technology.
IPL65R070C7AUMA1
Infineon IPL65R070C7AUMA1 is a N-CHANNEL FET with 650V DS Breakdown Voltage, 0.07 ohm RDS(ON), and 145A IDM. Ideal for SWITCHING applications due to ENHANCEMENT MODE operation. Features include BUILT-IN DIODE, METAL-OXIDE SEMICONDUCTOR tech, and DRAIN case connection.
IPL65R230C7AUMA1
Infineon IPL65R230C7AUMA1 is a N-CHANNEL FET with 650V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 41A Pulsed Drain Current, 0.23 ohm On Resistance, and 48mJ Avalanche Energy Rating. Its PLASTIC/EPOXY package with NO LEAD terminals makes it suitable for surface mount configurations.
IPL60R385CPAUMA1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Case Connection: DRAIN; Avalanche Energy Rating (EAS): 227 mJ; Transistor Element Material: SILICON;
IPL60R185CFD7AUMA1
Infineon IPL60R185CFD7AUMA1 is a N-CHANNEL FET with 600V DS breakdown voltage, ideal for switching applications. Features include 51A pulsed drain current, 0.185 ohm max on resistance, and 60mJ avalanche energy rating. Suitable for enhancement mode operation in various power electronics systems.
IPL60R1K5C6SATMA1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Position: DUAL; Transistor Element Material: SILICON; JESD-609 Code: e3;
IPL60R650P6SATMA1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Case Connection: DRAIN; Package Style (Meter): SMALL OUTLINE;
IPL60R185C7AUMA1
IPL60R185C7AUMA1 by Infineon is a N-CHANNEL FET with 600V DS breakdown voltage, ideal for switching applications. It has 45A IDM and 0.185 ohm max drain-source resistance. Operating in enhancement mode, it can handle up to 150°C temperature, making it suitable for high-power electronics.
IPL60R210P6AUMA1
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Terminals: 4; JESD-30 Code: S-PSSO-N4; Maximum Drain-Source On Resistance: .21 ohm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved