Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NPN; Surface Mount: YES; Maximum Power Dissipation (Abs): .25 W; Maximum Collector Current (IC): .07 A; Transistor Element Material: SILICON; No. of Elements: 1;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Native Components
$0.055
$0.053
Modulus Dynamics
$1.409
$1.353
$1.296
AZTECH Wire
$16.240
Component Stockers USA
$99.990
Microchip USA
Northwest PG Solutions
Corphita
Small Signal Bipolar Junction Transistors (BJT) BCR149T-E6327 attributes and parameters. Explore more Small Signal Bipolar Junction Transistors (BJT) devices from Infineon Technologies
Maximum Collector Current (IC):
Minimum DC Current Gain (hFE):
No. of Elements:
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Sub-Category:
Surface Mount:
Transistor Element Material:
BCR149T-E6327 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
National Semiconductor
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
International Semiconductor
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitronic Enterprise
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N2219A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .8 W; Maximum Collector Current (IC): .8 A;
SMMBT3904LT3G
Onsemi
SMMBT3904LT3G by Onsemi is a NPN BJT with 40V VCEO, 0.2A IC, and 300MHz fT. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance and compact SMALL OUTLINE package. With hFE of 30, it offers reliable performance at up to 150°C operating temperature.
2N3904TAR
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .2 A; Package Body Material: PLASTIC/EPOXY;
SBC846BWT1G
The Onsemi SBC846BWT1G is a NPN BJT with max power dissipation of 0.15W, hFE of 200, and fT of 100MHz. Ideal for small signal applications in electronics due to its single configuration, surface mount capability, and max collector current of 0.1A.
MMBT2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .33 W; Maximum Collector Current (IC): .6 A;
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
MMBT2222ALT1
Rectron
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Turn On Time (ton): 35 ns; Package Body Material: PLASTIC/EPOXY;
BC847-B
Kec
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .1 A; Transistor Element Material: SILICON;
MMBT2907A
Diodes Incorporated
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Power Dissipation (Abs): .225 W; Maximum Collector Current (IC): .6 A;
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel;
2N2907A
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Minimum Operating Temperature: -55 Cel;
BC817-40-7-F
BC817-40-7-F by Diodes Inc. is a NPN BJT transistor with 170 min hFE, 0.5A IC, and 45V VCE. Ideal for switching applications, it has a max power dissipation of 0.31W and operates up to 150°C. Its small outline package with gull wing terminals makes it suitable for surface mount designs.
2N3906
Vishay Semiconductors
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .2 A; Transistor Element Material: SILICON;
Silicon Transistor
2N2905A
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 200 MHz; Maximum Power Dissipation (Abs): .6 W; Maximum Collector Current (IC): .6 A;
SBC817-25LT1G
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .5 A;
BC547C
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .1 A;
BC847CT-7-F
BC847CT-7-F by Diodes Inc. is a NPN BJT with 420 min hFE, 45V VCEO, and 100MHz fT. Ideal for small signal applications in electronics due to its 0.1A IC, 0.15W Ptot, and -55°C to +150°C operating range. Its Gull Wing terminals make it suitable for surface mount designs requiring compact packaging.
Secos
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .2 A; Package Body Material: PLASTIC/EPOXY;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BCR108E6327HTSA1
Infineon's BCR108E6327HTSA1 is a NPN BJT with built-in resistor for switching applications. Features include 50V max collector-emitter voltage, 0.1A max collector current, and 170MHz transition frequency. Packaged in small outline with gull wing terminals, it operates up to 150°C making it ideal for compact electronic devices.
BCR108SH6327XTSA1
Infineon's BCR108SH6327XTSA1 is a NPN BJT with 2 elements, built-in resistor for switching applications. Features include hFE of 70, VCE of 50V, and fT of 170MHz. Its Gull Wing terminals and AEC-Q101 standard make it ideal for automotive electronics.
BCR112E6327HTSA1
BCR112E6327HTSA1 by Infineon Technologies is a NPN small signal bipolar junction transistor (BJT) with a built-in resistor. It is used for switching applications and has a max collector-emitter voltage of 50V and a min DC current gain of 20.
BCR135E6327HTSA1
Infineon BCR135E6327HTSA1 is a NPN BJT transistor with built-in resistor for switching applications. Features include 50V max collector-emitter voltage, 0.1A max collector current, and 150MHz transition frequency. Packaged in plastic/epoxy with gull wing terminals, it's ideal for surface mount designs requiring small outline packages.
BCR108WH6327XTSA1
Infineon's BCR108WH6327XTSA1 is a NPN BJT with built-in resistor for switching applications. Features include 50V max collector-emitter voltage, 170MHz transition frequency, and 70 min DC current gain. This small outline transistor has a gull wing terminal form and is surface mountable.
BCR108S-E6327
Siemens
NPN; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 170 MHz; Maximum Collector Current (IC): .1 A; Minimum DC Current Gain (hFE): 70;
BCR108S-E6327 by Infineon Technologies is a NPN BJT transistor with 2 elements and built-in resistor. It has a hFE of 70, Vce of 50V, and fT of 170MHz. Ideal for switching applications, this surface-mount device in a small outline package is designed for low current operations.
BCR108WH6433XTMA1
Infineon's BCR108WH6433XTMA1 is a NPN BJT with built-in resistor for switching applications. Features include hFE of 70, VCE of 50V, and fT of 170MHz. Ideal for automotive electronics due to AEC-Q101 compliance and Gull Wing terminals in a small outline package.
BCR108E6433HTMA1
Infineon BCR108E6433HTMA1 is a NPN BJT with built-in resistor for switching applications. Features include hFE of 70, VCE of 50V, and fT of 170MHz. Its small outline package with gull wing terminals makes it suitable for surface mount designs.
BCR108WE6327
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 170 MHz; Maximum Collector Current (IC): .1 A; Transistor Element Material: SILICON;
Infineon's BCR108WE6327 is a NPN BJT with built-in resistor for switching applications. Features include hFE of 70, VCE of 50V, and fT of 170MHz. Its small outline package with gull wing terminals makes it suitable for surface mount designs.
BCR116E6327HTSA1
BCR116E6327HTSA1 by Infineon Technologies is a NPN BJT with built-in resistor for switching applications. It has hFE of 70, VCE of 50V, and fT of 160MHz. This small outline transistor features Gull Wing terminals in a rectangular package suitable for surface mount assembly.
BCR108S-E6433
NPN; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 170 MHz; Maximum Collector Current (IC): .1 A; Qualification: Not Qualified;
BCR108S-E6433 by Infineon Technologies is a NPN BJT with 2 elements and built-in resistor. It has a hFE of 70, VCE of 50V, and IC of 0.1A. Ideal for switching applications, it comes in a small outline package with Gull Wing terminals for surface mount assembly.
BCR135SH6327XTSA1
Small Signal Bipolar Transistors; Moisture Sensitivity Level (MSL): 1; Terminal Finish: TIN; JESD-609 Code: e3;
BCR133E6327HTSA1
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 130 MHz; Maximum Collector Current (IC): .1 A; Minimum DC Current Gain (hFE): 30;
BCR116SH6327XTSA1
NPN; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 150 MHz; Maximum Collector Current (IC): .1 A; Package Shape: RECTANGULAR;
BCR141E6327HTSA1
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 130 MHz; Maximum Collector Current (IC): .1 A; Moisture Sensitivity Level (MSL): 1;
BCR108E6327XT
Small Signal Bipolar Transistors;
BCR135E6433HTMA1
NPN; Configuration: SINGLE WITH BUILT-IN RESISTOR; Surface Mount: YES; Nominal Transition Frequency (fT): 150 MHz; Maximum Collector Current (IC): .1 A; JESD-30 Code: R-PDSO-G3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved