Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
LAN9513-JZX-TR
Microchip Technology
LAN9513-JZX-TR by Microchip Technology is a Serial Communication Controller with 64 terminals, operating at 3.3V. It supports data rates up to 60 MBps and operates b/w 0°C to 70°C. Ideal for applications requiring high-speed communication in compact spaces.
YES
SYNC; BIT ;BYTE
60 MBps
S-PQCC-N64
e3
9 mm
1
64
70 Cel
0 Cel
PLASTIC/EPOXY
HVQCCN
LCC64,.35SQ,20
SQUARE
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
3.3
Not Qualified
1 mm
Serial IO/Communication Controllers
1.8 V
CMOS
COMMERCIAL
MATTE TIN
NO LEAD
.5 mm
QUAD
SERIAL IO/COMMUNICATION CONTROLLER, LAN
LAN9250/ML
LAN9250/ML by Microchip Technology is a Serial Communication Controller with 16-bit address bus width, 12.5 MBps data transfer rate, and 25 MHz clock frequency. It is used for communication protocols like ASYNC, BIT and SYNC, BYTE in applications requiring low power mode and I2C/SPI bus compatibility.
16
I2C; SPI
25 MHz
ASYNC, BIT; SYNC, BYTE
NRZ; BIPH-LEVEL(MANCHESTER)
12.5 MBps
QCCN
CHIP CARRIER
1.2,3.3
TS 16949
1.26 V
1.14 V
1.2 V
LAN9250/PT
LAN9250/PT by Microchip Tech is a Serial Comm Controller with 12.5 MBps data rate, 25 MHz clock freq, and 16-bit address bus width. Ideal for applications requiring high-speed communication like Ethernet interfaces in industrial automation systems.
S-PQFP-G64
10 mm
TQFP
TQFP64,.47SQ
FLATPACK, THIN PROFILE
1.2 mm
GULL WING
LAN9250I/ML
LAN9250I/ML by Microchip Technology is a Serial Communication Controller with 16-bit address bus width, 12.5 MBps data transfer rate, and 25 MHz clock frequency. Ideal for industrial applications requiring low power mode, it supports I2C and SPI bus compatibility for asynchronous and synchronous communication protocols.
85 Cel
-40 Cel
INDUSTRIAL
LAN9250I/PT
LAN9250I/PT by Microchip offers 12.5 MBps data rate, operates at -40 to 85 °C, and supports I2C/SPI bus compatibility. Ideal for industrial applications requiring low power serial communication controllers with a 16-bit address bus width and 25 MHz clock frequency.
LAN9250T/ML
LAN9250T/ML by Microchip Tech is a Serial Comm Controller with 16-bit Address Bus, 12.5 MBps Data Rate, and 25 MHz Clock Frequency. Ideal for I2C/SPI bus compatibility in COMMERCIAL grade applications requiring low power mode and boundary scan capability.
LAN9250T/PT
LAN9250T/PT by Microchip Tech is a Serial Comm Controller with 16-bit Address Bus, 12.5 MBps Data Rate, and 25 MHz Clock Frequency. Ideal for COMM applications, it supports I2C/SPI bus compatibility and operates in low power mode. With TS16949 screening level, it's suitable for various commercial temperature grade projects.
LAN9250TI/ML
LAN9250TI/ML by Microchip Technology is a Serial Communication Controller with 16-bit address bus width and 12.5 MBps data transfer rate. It operates at -40 to 85 °C, supports I2C and SPI bus compatibility, and is ideal for industrial applications requiring low power mode and high-speed communication protocols.
LAN9250TI/PT
LAN9250TI/PT by Microchip offers 12.5 MBps data transfer rate, operates at -40 to 85 °C, and supports I2C/SPI bus compatibility. Ideal for industrial applications requiring a low power serial communication controller with 16-bit address bus width and boundary scan capability.
LAN9250V/ML
LAN9250V/ML by Microchip Technology is a Serial Communication Controller with 16-bit Address Bus Width and 12.5 MBps Data Transfer Rate. It operates at -40 to 105 °C, supports I2C and SPI bus compatibility, and is ideal for industrial applications requiring low power mode and high-speed communication protocols like ASYNC and SYNC.
25MHZ NOMINAL CLOCK AVAILABLE; IEEE802.3Z NETWORK PROTOCOL AVAILABLE
NRZ; NRZI; BIPH-LEVEL(MANCHESTER)
S-XQCC-N64
105 Cel
UNSPECIFIED
LAN9250TV/ML
LAN9250TV/ML by Microchip is a Serial Communication Controller with 16-bit address bus width and 12.5 MBps data transfer rate. It operates in industrial temperature range, supports I2C and SPI bus compatibility, and is ideal for low power mode applications.
LAN91C111I-NS
LAN91C111I-NS by Microchip Technology is a Serial Communication Controller with 3.63V max supply voltage, 12.5 MBps data transfer rate, and 25 MHz clock frequency. It is ideal for Ethernet communication protocols in industrial applications due to its low power mode and compatibility with various bus systems like 680X0 and 683XX.
NO
680X0; 683XX
SYNC, BIT, BYTE, ETHERNET
32
R-PQFP-G128
20 mm
3
4
128
FQFP
QFP128,.70x.94,20
RECTANGULAR
FLATPACK, FINE PITCH
245
3.4 mm
140 mA
3.63 V
2.97 V
3.3 V
14 mm
LAN91C111I-NU
LAN91C111I-NU by Microchip Technology is a Serial Communication Controller with 3.63V max supply voltage, 12.5 MBps data transfer rate, and 25 MHz clock frequency. Ideal for industrial applications requiring Ethernet communication, it supports low power mode and has a temperature range of -40 to 85 °C.
S-PQFP-G128
TFQFP
TQFP128,.63SQ,16
FLATPACK, THIN PROFILE, FINE PITCH
260
.4 mm
ENC28J60-I/SP
ENC28J60-I/SP by Microchip Technology is a Serial Communication Controller with 3.1-3.6V supply voltage range, 1.25 MBps data transfer rate, and SPI bus compatibility. Ideal for LAN applications, it features 8192 RAM words, operates at -40 to 85 °C temperature range, and supports SYNC/BIT/BYTE communication protocol.
0
SPI
1.25 MBps
R-PDIP-T28
34.671 mm
28
8
DIP
DIP28,.6
IN-LINE
8192
4.572 mm
180 mA
3.6 V
3.1 V
THROUGH-HOLE
2.54 mm
DUAL
15.24 mm
KSZ8841-16MVLI-TR
KSZ8841-16MVLI-TR by Microchip Tech is a Serial Comm Controller with 3.1-3.5V supply, 12.5 MBps data rate, and 25 MHz clock freq. Ideal for LAN applications due to its low power mode, CMOS tech, and NRZ/NRZI/BIPH data encoding methods.
15
LFQFP
QFP128,.63SQ,16
FLATPACK, LOW PROFILE, FINE PITCH
1.6 mm
3.5 V
LAN91C113-NU
LAN91C113-NU by Microchip Tech is a Serial Comm Controller with 16-bit Address Bus, 12.5 MBps Data Rate, and 25 MHz Clock Frequency. Ideal for Ethernet communication in devices requiring low power mode and operating b/w 0-85°C temperature range.
BIT, BYTE, ETHERNET
7
OTHER
SIO1007-JV
SIO1007-JV by Microchip Technology is a Serial Communication Controller with 64 terminals, operating voltage range of 2.97-3.63 V, and temperature range of 0-70°C. It supports communication protocols like ASYNC, BIT; SYNC, BYTE; UART and is ideal for applications requiring low power mode in commercial-grade environments.
IRDA; LPC; PCI
ASYNC, BIT; SYNC, BYTE; UART
7 mm
NOT SPECIFIED
ISO/TS-16949
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
SCH3224-SY
SCH3224-SY by Microchip Tech is a Serial Comm Controller with 33MHz clock freq, 0.1875MBps data rate, and 256 RAM words. It's used for SYNC/BYTE comm protocols in commercial-grade applications requiring low power mode and 24 I/O lines.
PCI; UART
33 MHz
SYNC, BYTE
.1875 MBps
S-PBGA-B100
e1
8 mm
24
2
100
VFBGA
BGA100,11X11,25
GRID ARRAY, VERY THIN PROFILE, FINE PITCH
256
.8 mm
1 mA
3 V
TIN SILVER COPPER
BALL
.65 mm
BOTTOM
SERIAL IO/COMMUNICATION CONTROLLER
SCH3226I-SY
Microchip Technology's SCH3226I-SY is a Serial Communication Controller with 3.63V max supply voltage, 33MHz clock frequency, and 0.1875MBps data transfer rate. Ideal for industrial applications requiring SYNC and BYTE communication protocols on a CMOS technology platform.
40
6
LAN7800T-I/VSX
Microchip Technology's LAN7800T-I/VSX is a Serial Communication Controller with 625 MBps data transfer rate, suitable for LAN applications. It operates b/w -40 to 85 °C and supports low power mode. With 10 serial I/Os and 8 I/O lines, it features a compact square package style with a terminal pitch of 0.4 mm.
625 MBps
S-XQCC-N48
6 mm
10
48
LCC48,.24SQ,16
512
.9 mm
LAN7850/8JX
LAN7850/8JX by Microchip Technology is a Serial Communication Controller with 125 MBps data transfer rate, 25 MHz clock frequency, and USB bus compatibility. It is ideal for applications requiring high-speed communication over short distances in commercial temperature environments.
USB
125 MBps
S-PQCC-N56
56
LCC56,.31SQ,20
183 mA
1.1 V
LAN7850T-I/8JX
LAN7850T-I/8JX by Microchip: Serial Communication Controller with 125 MBps data rate, 25 MHz clock frequency. Ideal for USB bus compatibility and low power mode applications in industrial settings. Features include 56 terminals, -40 to 85 °C operating temperature range, and boundary scan capability.
LAN9252T/PT
LAN9252T/PT by Microchip Tech is a Serial Comm Controller with 12.5 MBps data rate, 25 MHz clock freq, and 3.6 V max supply voltage. Ideal for Ethernet communication in automotive and industrial applications due to TS16949 screening, SYNC/BYTE protocol support, and low power mode feature.
I2C, SPI
SYNC, BYTE; ETHERNET
NRZI
HTFQFP
FLATPACK, HEAT SINK/SLUG, THIN PROFILE, FINE PITCH
LAN9252TI/ML
LAN9252TI/ML by Microchip Technology is a Serial Communication Controller with 16-bit Address Bus, 12.5 MBps Data Transfer Rate, and SYNC/BYTE Ethernet Protocol support. It operates b/w -40 to 85 °C, suitable for low power applications in automotive and industrial sectors. The chip carrier package has 64 terminals with a 0.5 mm pitch.
LAN9252TI/PT
LAN9252TI/PT by Microchip Technology is a Serial Communication Controller with 16-bit address bus width and 12.5 MBps data transfer rate. It supports SYNC, BYTE, and Ethernet communication protocols, making it ideal for high-speed networking applications. With low power mode and boundary scan feature, this IC offers reliable performance in various industrial environments.
LAN9252TV/ML
LAN9252TV/ML by Microchip Tech is a Serial Comm Controller with 12.5 MBps data rate, 25 MHz clock freq, and 3.6 V max supply voltage. It's used in Ethernet communication protocols for various applications due to its low power mode and I2C/SPI bus compatibility.
LAN9252T/ML
LAN9252T/ML by Microchip Tech is a Serial Comm Controller with 3-3.6V supply, 12.5 MBps data rate, and 25 MHz clock freq. Ideal for Ethernet communication in industrial automation systems due to its SYNC/BYTE protocol support and low power mode feature.
LAN9252/PT
LAN9252/PT by Microchip Technology is a Serial Communication Controller with 16-bit address bus width and 12.5 MBps data transfer rate. It is used in SYNC, BYTE, and Ethernet communication protocols for applications requiring low power mode and boundary scan capability at an operating temperature range of 0-70°C.
MCP2517FD-H/SLVAO
MCP2517FD-H/SLVAO by Microchip Technology is a Serial Communication Controller with a max data transfer rate of 1 MBps. It is commonly used in LAN applications and supports the CAN FD communication protocol.
40 MHz
CAN FD
1 MBps
R-PDSO-G14
8.65 mm
14
150 Cel
SOP
SOP14,.25
SMALL OUTLINE
2048
AEC-Q100; TS 16949
1.75 mm
20 mA
5.5 V
2.7 V
1.27 mm
3.9 mm
LAN7431-I/YXX
LAN7431-I/YXX by Microchip Technology is a Serial Communication Controller with 72 terminals, supporting SYNC and BYTE communication protocols for Ethernet. It operates at -40 to 85 °C, with a data transfer rate of 256 MBps and max clock frequency of 25 MHz. Ideal for PCI bus compatibility in industrial applications requiring low power mode.
ALSO HAVING NETWORK PROTOCOLS IEEE 802.3AZ; IEEE 802.1Q; IEEE 802.3X
PCI
256 MBps
S-XQCC-N72
72
1.32 V
30
LAN7431-V/YXX
LAN7431-V/YXX by Microchip Technology is a Serial Communication Controller with a max data transfer rate of 256 MBps. It has a low power mode and is suitable for applications requiring high-speed Ethernet communication.
Matte Tin (Sn) - annealed
LAN7431T-I/YXX
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 72; Package Code: HVQCCN; Package Shape: SQUARE;
LAN7431T-V/YXX
LAN7431T-V/YXX by Microchip Technology is a Serial Communication Controller with 256 MBps data transfer rate, 25 MHz clock frequency, and -40 to 105 °C operating temperature range. Ideal for industrial applications requiring high-speed communication over Ethernet using SYNC and BYTE protocols.
LAN7431T/YXX
The Microchip Technology LAN7431T/YXX is a Serial Communication Controller with 256 MBps data transfer rate, suitable for Ethernet communication. It operates b/w 0-70 °C and supports SYNC, BYTE protocols. With 72 terminals in a square package, it's ideal for PCI bus compatibility.
MCP2515-E/MLVAO
MCP2515-E/MLVAO by Microchip Tech is a Serial Comm Controller with 5.5V max supply voltage, 40MHz clock freq, and 0.125MBps data rate. Ideal for automotive apps, it supports SYNC/BIT/BYTE protocols and SPI bus compatibility in a compact chip carrier package.
NRZ
.125 MBps
S-PQCC-N20
4 mm
20
125 Cel
LCC20,.16SQ,20
AEC-Q100
10 mA
4.5 V
5 V
AUTOMOTIVE
SERIAL IO/COMMUNICATION CONTROLLER, CAN
MCP2515-E/SOVAO
MCP2515-E/SOVAO by Microchip Tech is a Serial Comm Controller with 18 terminals, operating at 4.5-5.5V, -40 to 125°C temp range. It supports 0.125 MBps data rate, SYNC/BIT/BYTE protocols for CAN communication in automotive applications.
R-PDSO-G18
11.55 mm
18
SOP18,.4
2.65 mm
7.5 mm
MCP2515-E/STVAO
MCP2515-E/STVAO by Microchip is a Serial Communication Controller with 20 terminals, operating at 4.5-5.5V and up to 125°C. It supports data rates up to 0.125 MBps, SPI bus compatibility, and low power mode. Ideal for automotive applications requiring SYNC/BIT/BYTE communication protocols at a max clock frequency of 40 MHz.
R-PDSO-G20
6.5 mm
TSSOP
TSSOP20,.25
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
4.4 mm
MCP2515-I/SOVAO
MCP2515-I/SOVAO by Microchip Tech is a Serial Comm Controller with 18 terminals, operating at 4.5-5.5V, supporting 0.125 MBps data rate. It's used in CAN communication protocols for SYNC/BIT/BYTE encoding/decoding, ideal for industrial applications due to -40 to 85 °C temp range and low power mode.
MCP2515-I/STVAO
MCP2515-I/STVAO by Microchip: 5.5V max supply, 0.125 MBps data rate, -40 to 85 °C temp range. Ideal for CAN communication in automotive applications due to AEC-Q100 screening and SPI bus compatibility.
MCP2515T-E/MLVAO
MCP2515T-E/MLVAO by Microchip: 5.5V supply, 125°C temp, 0.125 MBps data rate. Automotive-grade CAN controller with SPI bus compatibility for serial communication in vehicles. Ideal for low power applications with 20 terminals and 1mm seated height.
MCP2515T-E/SOVAO
MCP2515T-E/SOVAO by Microchip: Serial Communication Controller with 5.5V max supply, 0.125 MBps data rate, and -40 to 125 °C temp range. Ideal for automotive applications requiring SPI bus compatibility and low power mode operation.
MCP2515T-I/SOVAO
MCP2515T-I/SOVAO by Microchip: Serial Communication Controller with 18 terminals, 40 MHz clock frequency, and 0.125 MBps data rate. Ideal for CAN communication in industrial applications due to low power mode and AEC-Q100 screening level.
MCP2518FDT-H/SLVAO
MCP2518FDT-H/SLVAO by Microchip Tech: Operates at 2.7-5.5V, 1MBps data rate, -40 to 150°C temp range. Ideal for automotive applications due to AEC-Q100 screening, SPI bus compatibility, and low power mode feature.
SOP14,.24
MCP2518FDT-E/QBBVAO
MCP2518FDT-E/QBBVAO by Microchip: Operates at 2.7-5.5V, 1 MBps data rate, -40 to 125°C temp range. Ideal for automotive applications with SPI bus compatibility and low power mode for efficient serial communication control.
R-PDSO-N14
4.5 mm
HVSON
LCC14,.18X.12,30
SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
3 mm
MCP2518FDT-E/SLVAO
MCP2518FDT-E/SLVAO by Microchip is a Serial Communication Controller with 1MBps data transfer rate, SPI bus compatibility, and low power mode. Ideal for automotive applications due to AEC-Q100 screening level, operating temperature range of -40 to 125 °C, and small outline package style.
MCP2518FDT-H/QBBVAO
MCP2518FDT-H/QBBVAO by Microchip Tech is a Serial Comm Controller with 1MBps data rate, 40MHz clock freq, and -40 to 150°C temp range. Ideal for automotive applications due to AEC-Q100 screening, SPI bus compatibility, and low power mode support.
LAN9253T/R4X
LAN9253T/R4X by Microchip Technology is a Serial Communication Controller with 16-bit Address Bus Width. It operates at 1.14-1.26 V, achieving data transfer rates up to 12.5 MBps. Ideal for applications requiring low power consumption and high-speed communication protocols like SYNC and BYTE over I2C or SPI buses.
LAN9253-I/R4X
LAN9253-I/R4X by Microchip Technology is a Serial Communication Controller with 16-bit Address Bus, 12.5 MBps Data Transfer Rate, and 25 MHz Clock Frequency. It is ideal for applications requiring high-speed data communication over I2C or SPI buses in industrial automation and networking systems.
© 2023 All rights reserved
