Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
NCP1400ASN25T1
Onsemi
NCP1400ASN25T1 by Onsemi is a voltage-mode switching regulator with a max output current of 0.4A and a max switching frequency of 216kHz. It operates in an industrial temperature range from -40 °C to 85°C, making it suitable for various boost applications requiring precise control and efficiency. The small outline package with dual terminals and gull wing form factor ensures easy surface mount installation in space-constrained designs.
SWITCHING REGULATOR
VOLTAGE-MODE
PULSE WIDTH MODULATION
5 V
.95 V
R-PDSO-G5
e0
3 mm
1
5
85 Cel
-40 Cel
.4 A
PLASTIC/EPOXY
TSSOP
TSOP5/6,.11,37
RECTANGULAR
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
235
Not Qualified
1.1 mm
Switching Regulator or Controllers
YES
BOOST
216 kHz
INDUSTRIAL
TIN LEAD
GULL WING
.95 mm
DUAL
1.5 mm
NCP1402SN27T1
NCP1402SN27T1 by Onsemi is a voltage-mode switching regulator with a max output current of 0.4A and boost switcher configuration. It operates in an industrial temperature grade range from -40 °C to 85°C, making it suitable for various applications requiring efficient power management in compact spaces. The package style is small outline, thin profile, shrink pitch, with surface mount capability for easy integration into electronic devices.
PULSE FREQUENCY MODULATION
6 V
CMOS
NCP1402SN30T1
NCP1402SN30T1 by Onsemi is a voltage-mode switching regulator with 5 terminals, operating b/w -40 to 85 °C. It has a max output current of 0.4A and supports boost configuration for industrial applications. The IC features pulse frequency modulation control technique and a compact thin profile package design for surface mount assembly.
NCP1402SN33T1
NCP1402SN33T1 by Onsemi is a voltage-mode switching regulator with a max output current of 0.4A, ideal for industrial applications. Operating temperature ranges from -40 to 85 °C, making it suitable for various environments. With a boost switcher configuration and pulse frequency modulation control technique, it offers efficient power management in a compact package.
NCP1402SN50T1
NCP1402SN50T1 by Onsemi is a voltage-mode switching regulator with 5 terminals, operating from -40 to 85 °C. It has a max output current of 0.4A and supports boost configuration for industrial applications. The IC features pulse frequency modulation control technique and a small outline package style with tin lead terminal finish.
NCP1729SN35T1
NCP1729SN35T1 by Onsemi is a small outline, thin profile switching regulator with 6 terminals. It operates in industrial temperature range (-40 to 85 °C) and has a max output voltage of -5.5V. Ideal for applications requiring a switched capacitor converter with input voltage ranging from 1.15V to 6V.
SWITCHED CAPACITOR CONVERTER
1.15 V
R-PDSO-G6
6
-5.5 V
-1.15 V
TSOP6,.11,37
Other Analog ICs
DOUBLER INVERTER
54 kHz
CS5422GDWFR24
CS5422GDWFR24 by Onsemi is a 24-terminal switching controller with max output current of 1.5A and max switching frequency of 750kHz. Ideal for applications requiring pulse width modulation control technique in commercial temperature grade environments.
SWITCHING CONTROLLER
CURRENT/VOLTAGE-MODE
13.2 V
10.8 V
12 V
R-PDSO-G24
15.395 mm
24
70 Cel
0 Cel
1.5 A
SOP
SOP24,.4
SMALL OUTLINE
2.65 mm
PHASE-SHIFT
750 kHz
COMMERCIAL
Tin/Lead (Sn80Pb20)
1.27 mm
7.5 mm
CS5165AGDW16
CS5165AGDW16 by Onsemi is a 16-terminal switching controller with PWM control mode, operating b/w 0-70 °C. It has a max output current of 15mA and supports push-pull switcher configuration at a frequency of up to 1MHz. Ideal for applications requiring precise voltage/current regulation in compact designs.
14 V
8 V
R-PDSO-G16
10.3 mm
16
.015 A
SOP16,.4
PUSH-PULL
1000 kHz
CS5165AGDWR16
CS5165AGDWR16 by Onsemi is a 16-terminal switching controller with PWM control mode. It operates b/w 0-70 °C, has a max output current of 15mA, and supports push-pull switcher config. Ideal for applications requiring high switching frequency up to 1MHz in commercial temperature grade environments.
NCP1410DMR2
NCP1410DMR2 by Onsemi is a voltage-mode switching regulator with 1A output current, 600kHz max frequency, and boost switcher config. Ideal for industrial applications, it operates b/w -40 to 85 °C with input voltage range of 1-5.5V. This small outline IC in square package suits surface mount designs with dual terminals.
5.5 V
1 V
3.3 V
S-PDSO-G8
8
1 A
TSSOP8,.19
SQUARE
600 kHz
.65 mm
NCP1450ASN19T1
NCP1450ASN19T1 by Onsemi is a voltage-mode switching controller with a max output current of 0.15A and a max switching frequency of 216kHz. It operates in an industrial temperature grade range from -40 °C to 85°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline, thin profile, shrink pitch, with gull wing terminals for surface mount assembly.
.15 A
SINGLE
NCP1450ASN27T1
NCP1450ASN27T1 by Onsemi is a voltage-mode switching controller with a max output current of 0.15A and a max switching frequency of 216kHz. It is designed for industrial applications, operates b/w -40 to 85 °C, and comes in a small outline package suitable for surface mount assembly.
NCP1450ASN30T1
NCP1450ASN30T1 by Onsemi is a voltage-mode switching controller with a max output current of 0.15A and a max switching frequency of 216kHz. It operates in an industrial temperature range from -40 °C to 85°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline, thin profile, shrink pitch, with gull wing terminals for surface mount assembly.
NCP1450ASN33T1
NCP1450ASN33T1 by Onsemi is a voltage-mode switching controller with a max output current of 0.15A and a max switching frequency of 216kHz. It is designed for industrial applications, featuring a small outline package style and dual terminal position for compact designs. The device operates in temperatures ranging from -40 °C to 85°C, making it suitable for various power management solutions.
NCP1450ASN50T1
NCP1450ASN50T1 by Onsemi is a voltage-mode switching controller with max output current of 0.15A and max operating temp of 85 °C. Ideal for industrial applications, this IC has a small outline package style and operates at a max switching frequency of 216kHz.
NCP5162DR2
NCP5162DR2 by Onsemi is a 16-terminal switching controller with max output current of 3A and max switching frequency of 1kHz. It operates b/w -40 to +125 °C, ideal for voltage-mode control applications in commercial-grade electronics requiring compact design and high efficiency.
ALSO REQUIRES A SUPPLY OF 9.5V TO 14V
CONSTANT OFF TIME
16 V
9.9 mm
3 A
SOP16,.25
1.75 mm
3.9 mm
CS51220EDR16
CS51220EDR16 by Onsemi is a voltage-mode switching controller with 16 terminals. It operates b/w -40 to 85 °C, suitable for industrial applications. With a max output current of 0.1A and a switching frequency of 500kHz, it's ideal for compact designs requiring precise power regulation.
4.7 V
10 V
.1 A
500 kHz
CS5305GDW28
CS5305GDW28 by Onsemi is a 28-terminal switching controller with PWM control mode. It operates b/w 0-70 °C, suitable for commercial applications. With a max output current of 0.1A and switcher config as phase-shift, it's ideal for high-frequency power conversion tasks up to 1000kHz.
9.5 V
R-PDSO-G28
17.925 mm
28
SOP28,.4
NCP1050P100
NCP1050P100 by Onsemi is a VOLTAGE-MODE SWITCHING REGULATOR with 2A output current, operating b/w -40 to 125 °C. Ideal for automotive applications, it features a max switching frequency of 113 kHz and package style IN-LINE RECTANGULAR.
8.5 V
7.5 V
R-PDIP-T8
9.78 mm
125 Cel
2 A
DIP
DIP8,.3
IN-LINE
4.45 mm
NO
113 kHz
AUTOMOTIVE
THROUGH-HOLE
2.54 mm
7.62 mm
NCP1050P136
NCP1050P136 by Onsemi is a VOLTAGE-MODE SWITCHING REGULATOR with 2A output current, operating b/w -40 to 125 °C. Ideal for automotive applications, it has a max switching frequency of 154 kHz and nominal input voltage of 8V.
154 kHz
NCP1051P100
NCP1051P100 by Onsemi is a VOLTAGE-MODE control SWITCHING REGULATOR with 2A output current, operating b/w -40 to 125 °C. Ideal for automotive applications due to its AUTOMOTIVE temperature grade and PULSE WIDTH MODULATION control technique.
NCP1051P136
NCP1051P136 by Onsemi is a VOLTAGE-MODE SWITCHING REGULATOR with 2A output current, operating b/w -40 to 125 °C. It has an input voltage range of 7.5-8.5V, making it ideal for automotive applications due to its PULSE WIDTH MODULATION control technique and compact IN-LINE package style.
NCP1052P100
NCP1052P100 by Onsemi is a VOLTAGE-MODE switching regulator with 2A output current, operating b/w -40 to 125 °C. Ideal for automotive applications, it has an input voltage range of 7.5-8.5V and operates at a max frequency of 113 kHz in a PLASTIC/EPOXY package style.
NCP1053P100
NCP1053P100 by Onsemi is a VOLTAGE-MODE switching regulator with 2A output current, 113 kHz max frequency. Ideal for automotive applications, it operates b/w -40 to 125 °C and has an input voltage range of 7.5-8.5V.
NCP1203D100R2
NCP1203D100R2 by Onsemi is a switching controller with current-mode control technique, operating at -40 to 125 °C. It has a max output current of 0.25A and operates at a max frequency of 115kHz. Ideal for automotive applications due to its small outline package and pulse width modulation technology.
CURRENT-MODE
11 V
R-PDSO-G8
4.9 mm
3
.25 A
SOP8,.25
115 kHz
NCP1203D40R2
NCP1203D40R2 by Onsemi is a switching controller with current-mode control technique, operating b/w -40 to 125 °C. It has a max output current of 0.25A and operates at a max frequency of 47kHz. Ideal for automotive applications due to its small outline package style and pulse width modulation technology.
47 kHz
NCP1203D60R2
NCP1203D60R2 by Onsemi is a switching controller with current-mode control technique. It operates in the temperature range of -40 to 125 °C and has a max output current of 0.25A. This CMOS technology-based device is ideal for automotive applications due to its small outline package style and pulse width modulation control mode.
8.4 V
73 kHz
NCP1203P100
NCP1203P100 by Onsemi is a switching controller with max output current of 0.25A and max operating temp of 125 °C. Ideal for automotive applications, it operates in current-mode control technique with a max switching frequency of 115kHz.
NCP1203P60
NCP1203P60 by Onsemi is a switching controller with current-mode control technique. It operates in automotive grade temperature range (-40 to 125 °C) and has a max output current of 0.25 A at a switching frequency of 73 kHz. Ideal for applications requiring pulse width modulation control in compact designs.
NCP1205P
NCP1205P by Onsemi is a switching controller with current-mode control technique. It operates b/w -25 to 85 °C, with input voltage range of 8-30V and max switching frequency of 125kHz. Ideal for applications requiring efficient power regulation in compact spaces.
30 V
-25 Cel
125 kHz
OTHER
NCP1650DR2
NCP1650DR2 by Onsemi is a current-mode switching regulator with 14V nominal voltage, operating b/w -40 to 125 °C. It features a max switching frequency of 250 kHz and is ideal for automotive power factor control applications.
POWER FACTOR CONTROLLER
10.5 V
14
250 kHz
NCP1651DR2
NCP1651DR2 by Onsemi is a current-mode switching regulator with 14V nominal voltage and 250 kHz max switching frequency. Ideal for automotive applications, it features a small outline package style, -40 to 125 °C operating temperature range, and pulse width modulation control technique.
CS5211EDR14
CS5211EDR14 by Onsemi is a 14-terminal switching controller with PWM control mode. It operates b/w -40 to 85 °C, has max output current of 1.5A, and supports push-pull switcher config. Ideal for industrial applications requiring high-frequency operation and compact design.
4.5 V
R-PDSO-G14
8.65 mm
SOP14,.25
900 kHz
Tin/Lead (Sn/Pb)
30
CS5211GDR14
CS5211GDR14 by Onsemi is a 14-terminal switching controller with PWM control mode. It operates b/w 0-70 °C, has a max output current of 1.5A, and supports push-pull switcher config. Ideal for applications requiring high-frequency operation in compact spaces.
CS5308GDW28
CS5308GDW28 by Onsemi is a 28-terminal switching controller with a max output current of 1.5A and max switching frequency of 1000 kHz. It operates b/w 0-70 °C, ideal for commercial applications requiring phase-shift control in small outline packages.
ALSO REQUIRES A SUPPLY OF 9V TO 20V
PHASE-SHIFT CONTROL
CS5308GDWR28
CS5308GDWR28 by Onsemi is a 28-terminal switching controller with max output current of 1.5A and max switching frequency of 1000kHz. It operates b/w 0-70 °C, ideal for commercial applications requiring phase-shift control in a small outline package.
NCP1417DMR2
NCP1417DMR2 by Onsemi is a VOLTAGE-MODE switching regulator with 1A output current, operating from -40 to 85 °C. It has a boost configuration, 600kHz max switching frequency, and supports input voltage range of 1-5.5V. Ideal for industrial applications requiring compact design and efficient power management.
2.5 V
NCP1500DMR2
NCP1500DMR2 by Onsemi is a current-mode switching regulator with 8 terminals, operating b/w -40 to 85°C. It features a max output current of 0.8A, PWM control technique, and buck switcher configuration. Ideal for industrial applications requiring a nominal input voltage of 3.6V and supporting a wide input range from 2.7V to 5.4V at a max frequency of 630kHz.
5.4 V
2.7 V
3.6 V
.8 A
BUCK
630 kHz
NCP1571DR2
NCP1571DR2 by Onsemi is a switching controller with 1.5A output current, 250kHz max frequency, and 12V nominal input voltage. It is used in applications requiring pulse width modulation control technique for efficient power management in compact spaces.
12.6 V
11.4 V
NCP1571D
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; JESD-30 Code: R-PDSO-G8;
NCP1800DM41R2
NCP1800DM41R2 by Onsemi is a switching regulator with 2.5-16V power supplies, -20 to 85 °C operating temperature range, and 8 terminals in a small outline package. Ideal for battery charge control applications due to its current-mode control, 0.02A output current, and compact design.
BATTERY CHARGE CONTROLLER
-20 Cel
.02 A
2.5/16
Power Management Circuits
.25 mA
NCV3843BVDR2
NCV3843BVDR2 by Onsemi is a switching controller with max output current of 1A and max input voltage of 25V. It operates in automotive grade temperature range (-40 to 125 °C) using pulse width modulation control technique at a frequency of 275kHz. Ideal for compact applications requiring efficient power management.
25 V
15 V
275 kHz
BIPOLAR
CS5307GDW24
CS5307GDW24 by Onsemi is a switching controller with current-mode control technique. It operates b/w 0-70 °C, has a max output current of 0.1A, and supports pulse width modulation. Ideal for applications requiring small outline package style and phase-shift switcher configuration.
NCP5332ADWR2
NCP5332ADWR2 by Onsemi is a 28-terminal switching controller with a max output current of 1.5A and max switching frequency of 1000kHz. It operates b/w -40 to +85 °C, ideal for voltage-mode control applications in commercial-grade electronics requiring high efficiency and compact design.
ALSO REQUIRES A SUPPLY OF 9.5V TO 20V
17.9 mm
NCP5332ADW
NCP5332ADW by Onsemi is a voltage-mode switching controller with 1.5A output current and 1000kHz max switching frequency. Ideal for commercial applications, it operates b/w 0-70 °C, has a package size of 7.5mm x 17.9mm, and supports input voltages from 4.5V to 14V.
NCP1051P44
NCP1051P44 by Onsemi is a VOLTAGE-MODE control SWITCHING REGULATOR with 2A output current, operating at -40 to 125 °C. Ideal for automotive applications, it has an input voltage range of 7.5-8.5V and a max switching frequency of 50 kHz in an IN-LINE package style.
50 kHz
NCP1053P44
NCP1053P44 by Onsemi is a VOLTAGE-MODE SWITCHING REGULATOR with 2A output current, operating at -40 to 125 °C. Ideal for automotive applications, it has an input voltage range of 7.5-8.5V and operates at a max frequency of 50 kHz in a RECTANGULAR PLASTIC package style.
NCP1055P44
NCP1055P44 by Onsemi is a VOLTAGE-MODE SWITCHING REGULATOR with 2A output current, 50kHz switching frequency. Ideal for automotive applications, it operates b/w -40 to 125 °C and has an input voltage range of 7.5-8.5V.
© 2023 All rights reserved
