Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Add filters
All
Selected
NCP1246ALD065R2G
Onsemi
NCP1246ALD065R2G by Onsemi is a current-mode switching controller with a max operating temp of 125 °C. It has a wide input voltage range from 9.3V to 28V and operates at a max frequency of 65 kHz. Ideal for automotive applications due to its small outline package and pulse width modulation control technique.
CONFIGURED AS FLYBACK CONVERTER
SWITCHING CONTROLLER
CURRENT-MODE
PULSE WIDTH MODULATION
28 V
9.3 V
11 V
R-PDSO-G7
e3
4.9 mm
1
7
125 Cel
-40 Cel
PLASTIC/EPOXY
SOP
RECTANGULAR
SMALL OUTLINE
260
1.75 mm
YES
65 kHz
AUTOMOTIVE
MATTE TIN
GULL WING
1.27 mm
DUAL
30
3.9 mm
TL594CDTBR2
TL594CDTBR2 by Onsemi is a 16-terminal switching controller with voltage-mode control. It operates b/w -25 to 85 °C and supports input voltages from 7V to 40V. With a max output current of 0.5A and PWM control technique, it's ideal for push-pull switcher applications up to 300 kHz frequency.
VOLTAGE-MODE
40 V
7 V
15 V
R-PDSO-G16
e4
5 mm
16
85 Cel
-25 Cel
.5 A
TSSOP
TSSOP16,.25
SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
Not Qualified
1.2 mm
Switching Regulator or Controllers
PUSH-PULL
300 kHz
BIPOLAR
OTHER
NICKEL PALLADIUM GOLD
.65 mm
4.4 mm
TL594CDTB
TL594CDTB by Onsemi is a 16-terminal switching controller with voltage-mode control technique. It operates b/w -25 to 85 °C, with input voltage range of 7-40 V and output current up to 0.5 A at 300 kHz frequency. Ideal for push-pull switcher applications in compact designs requiring thin profile packages.
CS5332GDWR28
CS5332GDWR28 by Onsemi is a 28-terminal switching controller with max output current of 1.5A and max switching frequency of 1000 kHz. Ideal for applications requiring phase-shift control technique, it operates b/w -40 to +70 °C temperature range.
ALSO REQUIRES 8V TO 20V SUPPLY
CURRENT/VOLTAGE-MODE
PHASE-SHIFT CONTROL
14 V
4.7 V
10 V
R-PDSO-G28
e0
17.925 mm
28
70 Cel
0 Cel
1.5 A
235
2.65 mm
PHASE-SHIFT
1000 kHz
COMMERCIAL
TIN LEAD
7.5 mm
NCP1400ASN19T1
NCP1400ASN19T1 by Onsemi is a voltage-mode switching regulator with a max output current of 0.4A and a max switching frequency of 216kHz. It operates in an industrial temperature grade range from -40 °C to 85°C, making it suitable for various boost applications requiring precise control techniques. The small outline package with dual terminals and gull wing form factor enables surface mount assembly in space-constrained designs.
SWITCHING REGULATOR
5 V
.95 V
R-PDSO-G5
3 mm
5
.4 A
TSOP5/6,.11,37
1.1 mm
BOOST
216 kHz
INDUSTRIAL
.95 mm
1.5 mm
NCP1400ASN30T1
NCP1400ASN30T1 by Onsemi is a voltage-mode switching regulator with a max output current of 0.4A and a max switching frequency of 216kHz. It operates in an industrial temperature range from -40 °C to 85°C, making it suitable for various boost applications requiring precise voltage control in compact designs.
NCP1400ASN33T1
NCP1400ASN33T1 by Onsemi is a voltage-mode switching regulator with a max output current of 0.4A and a max switching frequency of 216kHz. It operates in an industrial temperature range from -40 °C to 85°C, making it suitable for various boost applications requiring precise voltage control in compact designs.
NCP1400ASN50T1
NCP1400ASN50T1 by Onsemi is a voltage-mode switching regulator with a max output current of 0.4A and a max switching frequency of 216kHz. It operates in an industrial temperature range from -40 °C to 85°C, making it suitable for various boost applications requiring precise voltage control in compact designs.
NCP3064BPG
NCP3064BPG by Onsemi is a switching regulator with 1.5A output current, 190kHz switching frequency, and -40 to 125 °C operating temperature range. Ideal for automotive applications due to its hysteric current mode control technique and buck-boost switcher configuration in an 8-terminal rectangular package.
HYSTERETIC CURRENT MODE
3 V
R-PDIP-T8
9.78 mm
8
DIP
DIP8,.3
IN-LINE
NOT SPECIFIED
4.45 mm
NO
BUCK-BOOST
190 kHz
Tin (Sn)
THROUGH-HOLE
2.54 mm
7.62 mm
NCV3064PG
NCV3064PG by Onsemi is a switching regulator with 1.5A output current, 190kHz max frequency, and -40 to 125 °C operating temp range. Ideal for automotive applications due to its buck-boost configuration and hysteric current mode control technique.
LM2596TADJG
LM2596TADJG by Onsemi is a 5-terminal switching regulator with max output current of 7.5A and max input voltage of 40V. Ideal for automotive applications, it operates b/w -40 to 125 °C in buck configuration at a max frequency of 180 kHz.
ALSO OPERATES IN ADJUSTABLE MODE FROM 1.23 TO 37 V
4.5 V
12 V
R-XSFM-T5
7.5 A
UNSPECIFIED
SIP5,.1,67TB
FLANGE MOUNT
BUCK
180 kHz
1.7 mm
SINGLE
NCP5386BMNR2G
NCP5386BMNR2G by Onsemi is a 32-terminal chip carrier with voltage-mode control, PWM technique, and phase-shift switcher config. Operating b/w 0-85 °C, it has a max switching frequency of 1000 kHz. Ideal for applications requiring dual switching controllers in compact designs.
DUAL SWITCHING CONTROLLER
5.25 V
4.75 V
S-XQCC-N32
32
HVQCCN
LCC32,.2SQ,20
SQUARE
CHIP CARRIER
1 mm
TIN
NO LEAD
.5 mm
QUAD
NCV8851BDBR2G
NCV8851BDBR2G by Onsemi is a switching controller with current-mode control technique, operating b/w -40 to 125 °C. It has a max input voltage of 40 V and nominal output voltage of 6 V, suitable for automotive applications due to its compact size and high switching frequency of 575 kHz.
13.2 V
R-PDSO-G20
6.5 mm
3
20
6 V
575 kHz
NCP1250ASN100T1G
NCP1250ASN100T1G by Onsemi is a current-mode switching controller with 6 terminals, operating b/w -40 to 125 °C. It has a max input voltage of 28 V and peak reflow temperature of 260 °C. Ideal for automotive applications due to its small outline and pulse width modulation control technique.
9.4 V
R-PDSO-G6
6
TSOP6,.11,37
108 kHz
NCP1250BSN100T1G
NCP1250BSN100T1G by Onsemi is a switching controller with current-mode control technique. It operates b/w -40 to 125 °C and supports input voltage range of 9.4-28 V, making it ideal for automotive applications. With a max switching frequency of 108 kHz, this small outline IC in gull wing form is suitable for compact designs.
NCP1083DEG
NCP1083DEG by Onsemi is a switching controller with current-mode control technique. It operates in industrial temperature range from -40 to 85°C, suitable for various applications. With a max input voltage of 57V and switching frequency up to 500 kHz, it offers efficient power management in compact form factor.
57 V
0 V
2
HTSSOP
TSSOP20,.25
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
500 kHz
NCP1083DER2G
NCP1083DER2G by Onsemi is a switching regulator with a max operating temperature of 85°C and a min operating temperature of -40°C. It has a max input voltage of 57V and is commonly used in industrial applications requiring pulse width modulation control.
NCP3121MNTXG
NCP3121MNTXG by Onsemi is a 32-terminal SQUARE CHIP CARRIER with VOLTAGE-MODE control mode, operating b/w -40 to 125 °C. Ideal for automotive applications, it offers a max output current of 4.8A and operates at a max switching frequency of 862.5 kHz.
4.8 A
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
862.5 kHz
NCP5010FCT1G
NCP5010FCT1G by Onsemi is a voltage-mode switching regulator with a max output current of 0.56A and a max switching frequency of 1200kHz. It operates in an industrial temperature range from -40 °C to 85°C, making it suitable for various boost applications requiring precise control techniques. The package style is grid array with very thin profile and fine pitch, ideal for space-constrained designs.
CAN BE CONFIGURED IN CURRENT MODE
5.5 V
2.7 V
3.6 V
S-PBGA-B8
.56 A
VFBGA
GRID ARRAY, VERY THIN PROFILE, FINE PITCH
.66 mm
1200 kHz
BALL
BOTTOM
NCP5211BDR2G
NCP5211BDR2G by Onsemi is a 14-terminal switching controller with PWM control technique, operating at -40 to 85°C. It offers a max output current of 1A and supports push-pull switcher configuration with a max switching frequency of 900kHz. Ideal for industrial applications requiring precise voltage/current regulation in compact designs.
R-PDSO-G14
8.65 mm
14
1 A
SOP14,.25
900 kHz
40
UC3843BVD1G
UC3843BVD1G by Onsemi is a current-mode switching controller with max output current of 1A and max switching frequency of 500kHz. It operates in industrial temperature range (-40 to 105°C) and is ideal for applications requiring pulse width modulation control technique.
25 V
R-PDSO-G8
105 Cel
SOP8,.25
NCP3163BPWG
NCP3163BPWG by Onsemi is a 16-terminal switching regulator with voltage-mode control, operating b/w -40 to 85°C. It offers a max output current of 3.4A, supports buck-boost configuration, and has a max switching frequency of 300kHz. Ideal for industrial applications requiring efficient power management in compact spaces.
2.5 V
10.3 mm
3.4 A
HSOP
SOP16,.4
SMALL OUTLINE, HEAT SINK/SLUG
NCP3163BPWR2G
NCP3163BPWR2G by Onsemi is a 16-terminal switching regulator with voltage-mode control, operating b/w -40 to 85°C. It supports a max output current of 3.4A and has a buck-boost switcher configuration with a max switching frequency of 300kHz. Ideal for industrial applications requiring precise voltage regulation in compact spaces.
NCP3163PWG
NCP3163PWG by Onsemi is a 16-terminal switching regulator with voltage-mode control, operating b/w 0-70 °C. It has a max output current of 3.4A and supports buck-boost configuration at a frequency of up to 300kHz. Ideal for commercial applications requiring efficient power management in compact spaces.
NCV3163PWG
NCV3163PWG by Onsemi is a 16-terminal switching regulator with a max output current of 3.4A and operating temp range of -40 to 125 °C. Ideal for automotive applications, it features voltage-mode control, buck-boost switcher config, and a max input voltage of 40V.
NCV3163PWR2G
NCV3163PWR2G by Onsemi is a 16-terminal switching regulator with a max output current of 3.4A and a control mode of voltage-mode. With a wide operating temperature range from -40 to 125°C, it is ideal for automotive applications requiring efficient power management in compact spaces.
CS51411EMNR2G
CS51411EMNR2G by Onsemi is a 3A BUCK switching regulator with PWM control. It operates b/w -40 to 85 °C, suitable for industrial applications. With a max input voltage of 40V and small outline package, it's ideal for compact designs.
R-PDSO-N18
6 mm
18
3 A
HVSON
SOLCC18,.2,20
SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
296 kHz
NCP1377BD1R2G
NCP1377BD1R2G by Onsemi is a switching controller with current-mode control technique, operating temperature range of -40 to 125°C. It has a max output current of 0.5A and supports a max switching frequency of 300kHz. Ideal for automotive applications due to its small outline package style and CMOS technology.
ALSO HAS RESONANT CONTROL TECHNIQUE
8.2 V
CMOS
NCP5425DBG
NCP5425DBG by Onsemi is a dual switching controller with max output current of 2A and max switching frequency of 938kHz. It operates b/w 0-70 °C, suitable for commercial applications requiring pulse width modulation control technique in a small outline package.
4.6 V
2 A
938 kHz
NCP1395APG
NCP1395APG by Onsemi is a 16-terminal switching controller with current-mode control, resonant technique, and push-pull configuration. It operates at a max frequency of 1 MHz with input voltage range from 8.3V to 20V. Ideal for applications requiring high-frequency power conversion in compact spaces.
RESONANT CONTROL
20 V
8.3 V
R-PDIP-T16
19.175 mm
DIP16,.3
4.44 mm
NCP1395BDR2G
NCP1395BDR2G by Onsemi is a small outline switching controller with current-mode control technique, operating at a max frequency of 1MHz. It has a wide input voltage range from 8.3V to 20V, making it suitable for various applications requiring efficient power management in compact designs. The push-pull switcher configuration and resonant control make it ideal for high-frequency power conversion needs.
9.9 mm
SOP16,.25
NCP1395BPG
NCP1395BPG by Onsemi is a 16-terminal switching controller with current-mode control technique and resonant control. It operates at a max switching frequency of 1MHz, ideal for push-pull switcher configuration in applications requiring nominal input voltage of 11V to 20V.
NCP1523FCT2G
NCP1523FCT2G by Onsemi is a voltage-mode switching regulator with 1.2A output current, 3600kHz max switching frequency, and -40 to 85 °C operating temp range. Ideal for industrial applications requiring precise power management in compact spaces.
ALSO OPERATE IN PFM MODE
R-XBGA-B8
2.05 mm
1.2 A
BGA8,2X4,20
.655 mm
3600 kHz
Matte Tin (Sn)
1.05 mm
NCP1595AMNR2G
NCP1595AMNR2G by Onsemi is a current-mode switching regulator with max output current of 6.1A and max switching frequency of 1130kHz. It operates b/w -40 to 85°C, ideal for industrial applications requiring efficient power management in compact spaces. The IC features pulse width modulation control technique and buck switcher configuration, making it suitable for various electronic devices.
4 V
S-PDSO-N6
6.1 A
1.2 V
SOLCC6,.11,37
1130 kHz
NCP1595MNR2G
NCP1595MNR2G by Onsemi is a current-mode switching regulator with max output current of 6.1A and max switching frequency of 1130kHz. It operates in industrial temperature range, suitable for buck configuration applications requiring precise pulse width modulation control. The IC has small outline package with matte tin finish, making it ideal for space-constrained designs.
NCP5214AMNR2G
NCP5214AMNR2G by Onsemi is a voltage-mode switching controller with 3A output current, 460kHz max switching frequency, and PWM control technique. Ideal for industrial applications requiring a compact design with a small outline package style and wide input voltage range of 4.5V to 24V.
24 V
R-XDSO-N22
22
SOLCC22,.2,20
460 kHz
NCV2574DW-ADJR2
NCV2574DW-ADJR2 by Onsemi is a voltage-mode switching regulator with a max output current of 1.8A and a buck switcher configuration. Operating in automotive-grade temperatures, it accepts input voltages from 7V to 40V and has a max switching frequency of 63kHz. This IC is ideal for applications requiring efficient power management in compact spaces.
1.8 A
63 kHz
Tin/Lead (Sn/Pb)
NCP5214MNR2G
NCP5214MNR2G by Onsemi is a VOLTAGE-MODE SWITCHING CONTROLLER with 2.4A output current, 460 kHz switching frequency, and 12V nominal input voltage. It is ideal for industrial applications requiring efficient power management in a small outline package with surface mount capability.
R-PDSO-N22
2.4 A
NCP1282BDR2G
NCP1282BDR2G by Onsemi is a voltage-mode switching controller with max output current of 2.5A and max operating temp of 125 °C. Ideal for automotive applications, it operates at a freq of 1000kHz with a min input voltage of 2.023V, making it suitable for various power management tasks.
2.023 V
48 V
2.5 A
NCP1546MNR2G
NCP1546MNR2G by Onsemi is a 3A BUCK switching regulator with voltage-mode control, operating b/w -40 to 125 °C. Ideal for automotive applications, it supports input voltages from 4.5V to 40V and has a max switching frequency of 187kHz. The package is small outline with dual terminals and surface mount capability.
IT CAN ALSO OPERATE WITH CURRENT MODE
187 kHz
NCP1547MNR2G
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 18; Package Code: HVSON; Package Shape: RECTANGULAR; Surface Mount: YES;
R-XDSO-N18
150 Cel
374 kHz
UC2845BNG
UC2845BNG by Onsemi is a current-mode switching controller with max output current of 1A and max switching frequency of 275kHz. It operates b/w -25 to 85°C, ideal for regulating voltages in various applications such as power supplies and converters. The IC features pulse width modulation control technique and bipolar technology in an 8-terminal rectangular package style.
DIP7/8,.3
275 kHz
NCP1027P065G
NCP1027P065G by Onsemi is a switching regulator with 8 terminals, 71.5 kHz max frequency, and 0.8 A output current. It uses pulse width modulation for control and has a nominal input voltage of 8 V. Ideal for applications requiring efficient power conversion in compact spaces.
8 V
.8 A
71.5 kHz
NCP1027P100G
NCP1027P100G by Onsemi is a switching regulator with 8 terminals, 110 kHz max frequency, and 0.8 A output current. It uses pulse width modulation control technique for applications requiring efficient power conversion in compact spaces.
110 kHz
NCP1526MUTXG
NCP1526MUTXG by Onsemi is a VOLTAGE-MODE switching regulator with 1A output current, operating b/w -40 to 85 °C. Ideal for industrial applications, it supports input voltage range of 2.7-5.2V and offers a max switching frequency of 3600 kHz in a small outline package.
5.2 V
S-PDSO-N10
10
SOLCC10,.12,20
.55 mm
NCP5030MTTXG
NCP5030MTTXG by Onsemi is a current-mode switching regulator with 4.8A output current, 800kHz max switching frequency, and PWM control technique. It operates b/w -40 to 85°C, suitable for industrial applications requiring efficient power management in a compact form factor.
R-PDSO-N12
4 mm
12
.8 mm
800 kHz
NCP5395MNR2G
NCP5395MNR2G by Onsemi is a dual switching controller with a max switching frequency of 1100 kHz. It operates b/w 0-70 °C, suitable for commercial applications. This chip carrier has 48 terminals and uses pulse width modulation control technique for push-pull switcher configuration.
S-XQCC-N48
7 mm
48
1100 kHz
ADP4000JCPZ-RL7
ADP4000JCPZ-RL7 by Onsemi is a VOLTAGE-MODE SWITCHING CONTROLLER with 48 terminals in a SQUARE CHIP CARRIER package. It operates b/w 0-85 °C, has a max switching frequency of 9000 kHz, and supports PUSH-PULL switcher config. Ideal for applications requiring precise voltage control in compact spaces.
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.375 TO 1.8V; ALSO OPERATES IN CURRENT MODE
5.75 V
S-PQCC-N48
3.3 V
9000 kHz
© 2023 All rights reserved
