Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TL594CDTBR2 by Onsemi is a 16-terminal switching controller with voltage-mode control. It operates b/w -25 to 85 °C and supports input voltages from 7V to 40V. With a max output current of 0.5A and PWM control technique, it's ideal for push-pull switcher applications up to 300 kHz frequency.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
AZTECH Wire
$5.570
$5.350
$5.240
$5.140
Component Stockers USA
$99.990
Problanco Electronics
TANS Electronics
Kulean Microsystems
SupplyDigital Components
Corphita
UHIMA Technologies
Microchip USA
Corohmni
Plastic/Epoxy material provides durability and protects the internal components of the regulator, ensuring long-lasting performance.
Surface mount design allows for easy and efficient installation on circuit boards, saving space and making it suitable for compact applications.
Voltage-mode control offers precise regulation of output voltage, ensuring stable power delivery to connected devices.
With a maximum output current of 0.5 A, this regulator can efficiently power low to medium power devices, making it versatile for various applications.
High switching frequency of 300 kHz allows for fast response to load changes and efficient power conversion, improving overall performance.
Low minimum input voltage requirement of 7 V ensures compatibility with a wide range of power sources, making it versatile for different power supply setups.
Switching Regulators & Controllers TL594CDTBR2 attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
TL594CDTBR2 Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Devices 14/Apr/2010
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
1N4148
Nte Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MMBT2222ALT1G
Onsemi
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
LM317TG
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
Rugao Dachang Electronic
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
MBRM140T1G
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM5007MM/NOPB
LM5007MM/NOPB by Texas Instruments is a switching regulator with a max output voltage of 73V and max output current of 0.5A. It operates in automotive-grade temperatures (-40 to 125°C) making it suitable for automotive applications. With a compact package style, small outline, and thin profile, it is ideal for space-constrained designs.
UC2825DWTR
UC2825DWTR by Texas Instruments is a switching regulator/controller with a control mode of current-mode. It has a max output current of 2A and a max switching frequency of 1000kHz. This IC is commonly used in industrial applications requiring pulse width modulation control for push-pull switcher configurations.
LM2671M-ADJ/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS630701RNMT
TPS630701RNMT by Texas Instruments is a 15-terminal switching regulator with a max output current of 2A and a control mode of current-mode. It operates b/w -40 to 125°C, making it suitable for automotive applications requiring efficient power management in compact spaces.
TPS61222DCKR
TPS61222DCKR by Texas Instruments is a switching regulator with max output current of 0.4A and max operating temp of 85°C. Ideal for battery charge control applications, it operates in boost configuration with min input voltage of 0.7V and nominal output voltage of 5V.
LM25011MYX/NOPB
Switching Regulator or Controllers; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY;
LM2671MX-5.0/NOPB
TPS84250RKGT
TPS84250RKGT by Texas Instruments is a voltage-mode switching regulator with 2.5A output current, ideal for industrial applications. It operates b/w -40 to 85°C, with a wide input range of 7-50V and an output voltage of 5V. This chip carrier package has 41 terminals and a compact size of 11x9mm, making it suitable for space-constrained designs.
LM22675MRX-ADJ/NOPB
Switching Regulator or Controllers; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Finish: MATTE TIN;
UCC28C45DGKRG4
UCC28C45DGKRG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 1A and max switching frequency of 1000kHz. It operates in industrial temperature grade range (-40 to 105°C) and is suitable for applications requiring precise pulse width modulation control, such as power supplies and converters.
LTC1983ES6-5#TRMPBF
Linear Technology
SWITCHED CAPACITOR REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SG3525ANG
SG3525ANG by Onsemi is a VOLTAGE-MODE switching controller with 16 terminals. It operates b/w 0-70°C, handles up to 400 kHz switching frequency, and supports push-pull switcher config. Ideal for applications requiring PWM control of power converters in the commercial temperature range.
LM22675MRE-ADJ/NOPB
LM22675MRE-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 500kHz max switching frequency. Ideal for automotive applications due to its low profile, small outline package style, and wide operating temperature range from -40°C to 125°C.
LTM8055IY#PBF
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 121; Package Code: BGA; Package Shape: SQUARE; Surface Mount: YES;
LMZ14203EXTTZ/NOPB
SWITCHING REGULATOR; Temperature Grade: MILITARY; No. of Terminals: 7; Package Code: HSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2672M-5.0/NOPB
TPS40210DGQR
TPS40210DGQR by Texas Instruments is a switching regulator with 10 terminals, operating temperature range of -40 to 125°C, and output current up to 0.4A. It is ideal for automotive applications due to its compact size (3x3mm), pulse width modulation control technique, and buck-boost switcher configuration.
TPS60403DBVR
TPS60403DBVR by Texas Instruments is a small outline, low profile switching regulator with 5 terminals. It operates at -40 to 85°C and has a max output current of 0.06A. Ideal for industrial applications requiring a switched capacitor converter with input voltage range of 1.8-5.25V.
LMR51420YFDDCR
LMR51420YFDDCR by Texas Instruments is a current-mode switching regulator with max output voltage of 34.2V and max output current of 2A. Ideal for applications requiring pulse width modulation control technique, such as small outline, thin profile designs in automotive electronics.
LMR16006YDDCR
LMR16006YDDCR by Texas Instruments is a switching regulator with max output voltage of 55V, current-mode control, and max output current of 0.6A. Ideal for automotive applications due to its compact size, pulse width modulation control technique, and wide input voltage range from 4V to 60V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TL594CN
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TL594CDR2G
TL594CDR2G by Onsemi is a voltage-mode switching controller with a max output current of 0.5A and a max switching frequency of 300kHz. It is commonly used in applications such as push-pull switcher configurations for regulating and controlling power in electronic circuits.
TL594CDTBR2G
SWITCHING CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TL594CDR
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TL594INSR
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TL594IDR
TL594IDRE4
TL594IDRG4
TL594IDRG4 by Texas Instruments is a switching regulator/controller with a voltage-mode control technique. It has a nominal input voltage of 15V and can operate in industrial temperature range (-40 to 85°C). This IC is commonly used in boost switcher configurations for applications requiring a max output current of 0.25A.
TL594IPWR
TL594IPWR by Texas Instruments is a switching controller with a voltage-mode control technique. It has a max output current of 0.25 A and operates at temperatures ranging from -40 to 85 °C. This IC is commonly used in boost switcher applications.
TL594IPWRE4
SWITCHING CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TL594IPWRG4
TL593CN
DUAL SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TL593CNP3
Switching Regulator or Controllers; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TL593CJ4
TL593MJ
DUAL SWITCHING CONTROLLER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
TL594CDRE4
TL594CDRG3
TL594CDRG4
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved