Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP1395BDR2G by Onsemi is a small outline switching controller with current-mode control technique, operating at a max frequency of 1MHz. It has a wide input voltage range from 8.3V to 20V, making it suitable for various applications requiring efficient power management in compact designs. The push-pull switcher configuration and resonant control make it ideal for high-frequency power conversion needs.
Median Price
$1.090
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$0.905
10k+ parts
$0.807
Digiode
$0.892
Nova Conductors
$1.810
Bristol Electronics
$3.420
$1.607
Flip Electronics
Sensible Micro Corp
Chip Stock
Vyrian
Ampacity Inc.
$0.800
Semicontronic
$0.780
$0.776
Corphita
$0.845
Corohmni
$0.939
Argo Parts USA
Continental Prestige Electronics
$1.774
Bastille Electronics
$1.720
$1.634
$1.611
Vigor
$2.010
Microchip USA
$5.653
Advanced Electronics
$13.379
$12.175
$10.971
AZTECH Wire
$19.503
Aztec Data Supply Inc.
$22.830
Perfect Parts
Kepictronics
Lixinc
TANS Electronics
Authorized Procurement Solutions
A-Z Elektronik GmbH
Problanco Electronics
Futuretech Components
SupplyDigital Components
Kulean Microsystems
UHIMA Technologies
Plastic/epoxy material ensures durability and reliability, making it suitable for various applications.
Surface mount design allows for easy installation and space-saving on circuit boards.
Current-mode control provides stable and efficient operation, improving overall performance.
Matte tin finish ensures good conductivity and solderability, enhancing the product's reliability.
High switching frequency allows for efficient power conversion and reduced size of passive components.
Low minimum input voltage requirement makes this product suitable for a wide range of power sources.
Switching Regulators & Controllers NCP1395BDR2G attributes and parameters. Explore more Switching Regulators & Controllers devices from Onsemi
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
NCP1395BDR2G Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Multiple Parts obs 21/Apr/2022
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
SN65HVD230DR
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USBLC6-2SC6
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Sangdest Microelectronics (Nanjing)
2N2222A
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
FDLL4148
Fairchild Semiconductor
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
LM2931AZ-5.0RPG
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
LM2676S-ADJ
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 7; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2574HVMX-5.0/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM5146RGYR
LM5146RGYR by Texas Instruments is a switching controller with a max output voltage of 60V and max output current of 20A. Operating in voltage-mode control technique, it has a wide input voltage range from 5.5V to 100V, making it suitable for automotive applications requiring high power efficiency. With a compact chip carrier package style and very thin profile, this regulator is ideal for space-constrained designs in automotive electronics.
MC34063AP
SWITCHING REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
ICL7660SCBAZ-T
Integrated Device Technology
SWITCHED CAPACITOR CONVERTER; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2671MX-5.0/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC33063ADRJR
MC33063ADRJR by Texas Instruments is a switching regulator with VOLTAGE-MODE control, operating at -40 to 85 °C. It has a max output voltage of 40V and can handle up to 1.5A output current. Ideal for industrial applications requiring efficient buck-boost configurations in compact designs.
TPS54620RGYR
TPS54620RGYR by Texas Instruments is a 6A BUCK switching regulator with 0.8V min output, 15V max output, and 1600kHz max switching frequency. Ideal for automotive applications due to its -40 to 150°C operating temperature range and current-mode control technique.
LM2676S-5.0/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 7; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Seated Height: 4.89 mm;
LM2575TV-5G
LM2575TV-5G by Onsemi is a BIPOLAR SWITCHING REGULATOR with 3.2A output current, 63 kHz switching frequency, and VOLTAGE-MODE control. Ideal for automotive applications due to its AUTOMOTIVE temperature grade, it operates b/w -40°C to 125°C efficiently regulating voltage from 4.75V to 40V down to a stable 3.3V output.
LMR14206XMK/NOPB
LMR14206XMK/NOPB by Texas Instruments is a switching regulator with 6 terminals, operating temperature range of -40 to 125°C, and output voltage range from 0.765V to 34V. It is designed for automotive applications, featuring a compact rectangular package with very thin profile suitable for surface mount assembly. The control mode is current-mode PWM with max output current of 0.6A and switching frequency up to 1500kHz.
LMR36506R5RPER
LMR36506R5RPER by Texas Instruments is a switching regulator with a nominal input voltage of 24V and output voltage of 5V. It operates in current-mode control technique with a max output current of 0.6A, making it suitable for automotive applications requiring efficient power management in compact spaces. With a wide temperature range from -40°C to 150°C and high switching frequency of 2200 kHz, this chip carrier package offers reliable performance in demanding environments.
LM2576HVT-ADJLF03
LM2576HVT-ADJLF03 by National Semiconductor is a VOLTAGE-MODE switching regulator with 5 terminals, capable of 3A output current at a max frequency of 63kHz. Its PLASTIC/EPOXY body and IN-LINE style make it suitable for power supply applications requiring efficient voltage regulation.
LM5156QDSSRQ1
LM5156QDSSRQ1 by Texas Instruments is a switching controller with a 12V nominal input voltage and 300V max output voltage. Operating in automotive-grade temperatures, it features a current-mode control technique and buck-boost switcher configuration. With a max switching frequency of 2200 kHz, this IC is ideal for automotive power supply applications.
TPS60400DBVTG4
TPS60400DBVTG4 by Texas Instruments is a small outline, low profile switching regulator with a max output current of 0.06A and a max switching frequency of 350kHz. Ideal for industrial applications requiring an input voltage range from 1.8V to 5.25V and a min operating temperature of -40°C.
LM2596S-5.0/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
LMZ14201HTZE/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Position: SINGLE; Terminal Pitch: 1.27 mm;
LMR16006XDDCT
LMR16006XDDCT by Texas Instruments is a switching regulator with a max output voltage of 55V and max output current of 0.6A, suitable for automotive applications. It operates in buck configuration with pulse width modulation control technique, offering a wide input voltage range from 4V to 60V and high switching frequency up to 2100 kHz.
LM2733YMF/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPSM82822SILR
TPSM82822SILR by Texas Instruments is a switching regulator with 2A output current, 5V nominal input voltage, and 4V max output voltage. Ideal for automotive applications due to its hybrid technology, PWM control technique, and compact rectangular package style. Operates efficiently in temperatures ranging from -40°C to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP1595AMNR2G
NCP1595AMNR2G by Onsemi is a current-mode switching regulator with max output current of 6.1A and max switching frequency of 1130kHz. It operates b/w -40 to 85°C, ideal for industrial applications requiring efficient power management in compact spaces. The IC features pulse width modulation control technique and buck switcher configuration, making it suitable for various electronic devices.
NCP1403SNT1G
NCP1403SNT1G by Onsemi is a voltage-mode switching regulator with a max output current of 0.6A and a boost switcher configuration. Operating temperature ranges from -40 to 85°C, making it suitable for industrial applications. This small outline IC has 5 terminals, matte tin finish, and supports a max input voltage of 5.5V at a frequency of up to 300kHz.
NCP1521BSNT1G
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NCP1406SNT1G
NCP1406SNT1G by Onsemi is a switching regulator with current-mode control, operating b/w -40 to 85°C. It has a boost configuration, supporting input voltages from 1.4V to 5.5V and output currents up to 25mA. Ideal for industrial applications requiring high-frequency pulse modulation in a compact SOT-23 package.
NCP1597AMNTWG
NCP1597AMNTWG by Onsemi is a current-mode switching regulator with a max operating temp of 85°C and freq of 1130 kHz. Its small outline package makes it ideal for industrial applications requiring high efficiency power management in compact spaces. With surface mount capability and dual terminals, it offers reliable performance in harsh environments.
NCP1593BMNTWG
NCP1593BMNTWG by Onsemi is a current-mode switching regulator with a max output current of 5.5A and a max switching frequency of 1130kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various applications requiring efficient power management in compact spaces. The package style is small outline with very thin profile, ideal for space-constrained designs.
NCP1729SN35T1G
NCP1729SN35T1G by Onsemi is a small outline, thin profile switching regulator with a max output current of 0.025A and a max operating temperature of 85°C. Ideal for industrial applications requiring a switched capacitor converter with input voltage ranging from 1.15V to 6V.
NCP1529MUTBG
NCP1529MUTBG by Onsemi is a current-mode switching regulator with max output current of 1A and max switching frequency of 2200 kHz. It operates in industrial temperature range, suitable for buck applications with input voltage ranging from 2.7V to 5.5V.
NCP1207ADR2G
NCP1207ADR2G by Onsemi is a switching controller with a max output current of 0.5A and a max switching frequency of 200kHz. It operates in automotive temperature grades and uses pulse width modulation control technique, making it ideal for automotive applications requiring efficient power management.
NCP1593AMNTWG
NCP1593AMNTWG by Onsemi is a current-mode switching regulator with max output current of 5.5A and max switching frequency of 1130kHz. Ideal for industrial applications, it operates b/w -40 to 85°C, has a small outline package style, and supports pulse width modulation control technique.
NCP1034DR2G
NCP1034DR2G by Onsemi is a switching controller with a 12V nominal input voltage and 2A max output current. It operates in automotive-grade temperatures (-40 to 125 °C) and features hysteric current mode control technique. Ideal for applications requiring high efficiency and compact design, such as automotive electronics or industrial automation systems.
NCP1397ADR2G
SWITCHING CONTROLLER; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Input Voltage: 20 V;
NCP1532MUAATXG
NCP1532MUAATXG by Onsemi is a dual switching controller with a max output current of 0.6A and a max switching frequency of 2700 kHz. It operates in an industrial temperature grade range from -40 to 85°C, making it suitable for various applications requiring precise current-mode control. The small outline package with a very thin profile and surface mount capability makes it ideal for space-constrained designs.
NCP1529ASNT1G
NCP1529ASNT1G by Onsemi is a current-mode switching regulator with 1A output, 2200kHz max frequency, and 3.6V nominal input voltage. Ideal for industrial applications requiring efficient power management in compact spaces. Features small outline package with dual terminals and pulse width modulation control technique.
NCP1397BDR2G
NCP1397BDR2G by Onsemi is a switching controller with 1A output current and 560kHz max switching frequency. It operates on 10.3-20V input voltage range, ideal for resonant control applications in compact designs. The small outline package with gull wing terminals makes it suitable for surface mount PCBs.
NCP1252ADR2G
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Switching Frequency: 550 kHz;
NCP1200D60R2G
SWITCHING CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Position: DUAL;
NCP1423DMR2G
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
NCP1597BMNTWG
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved