Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LM5575QMHX/NOPB by Texas Instruments is a 16-terminal switching regulator with a max output voltage of 70V and max current of 2.5A. Ideal for automotive applications, it operates b/w -40 to 125°C, featuring pulse width modulation control mode at a max frequency of 500kHz.
Median Price
$2.860
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Texas Instruments
1+ parts
100+ parts
$2.506
1k+ parts
$1.416
10k+ parts
-
DigiKey
$5.810
$3.729
$3.582
Arrow
$1.825
Digiode
$2.717
Nova Conductors
$3.511
Chip Stock
Component Sense
Vyrian
Anansix
LIBRA Elektronik GmbH
Cyclops Electronics Ltd
ComSIT Distribution GmbH
Corohmni
$1.009
Semicontronic
$1.550
$1.511
$1.504
Corphita
$2.574
Ampacity Inc.
$3.380
Continental Prestige Electronics
$3.441
Argo Parts USA
Advanced Electronics
$4.073
$3.747
Component Stockers USA
$6.190
Parana Technologies
$14.372
$14.818
DigiPath Technology Company
$15.825
$14.559
ChromeModa Solutions
$16.148
$13.241
IDEA Electronic Components Group
$15.341
$14.533
Perfect Parts
QUARKTWIN TECHNOLOGY LTD
Lixinc
Authorized Procurement Solutions
Futuretech Components
Alle Elektronik GmbH
Kepictronics
A-Z Elektronik GmbH
Metaverse IC Inc.
Netroflash
$3.336
$3.266
Robosynatics
Lucentia Tech
PLASTIC/EPOXY - This material provides durability and reliability for the product.
YES - This feature allows for easy installation and space-saving on a PCB.
RECTANGULAR - The rectangular shape ensures compatibility with standard PCB layouts.
16 - Having 16 terminals allows for flexible connections and configurations.
SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH - This package style offers efficient heat dissipation and compact design.
125 °C - The high operating temperature range ensures stability in various environments.
1.23 V - The low minimum output voltage provides versatility for different applications.
CURRENT-MODE - Current-mode control offers enhanced performance and stability.
40 °C - The low minimum operating temperature makes this product suitable for harsh conditions.
Matte Tin (Sn) - Matte tin finish provides corrosion resistance and solderability.
70 V - The high maximum output voltage allows for a wide range of applications.
DUAL - Dual terminal position offers flexibility in circuit design and layout.
1.2 mm - The low seated height saves space and allows for compact designs.
4.4 mm - The narrow width enables the product to fit in tight spaces.
SWITCHING REGULATOR - This type of IC provides efficient power conversion and regulation.
48 V - The nominal input voltage suits various power supply applications.
260 - The high peak reflow temperature ensures proper soldering during assembly.
5 mm - The compact length makes this product suitable for small form factor applications.
AUTOMOTIVE - Automotive temperature grade ensures reliability in automotive applications.
500 kHz - High switching frequency allows for efficient power conversion.
2.5 A - The high output current capability can power a wide range of loads.
GULL WING - Gull wing terminal form provides secure connections and easy soldering.
PULSE WIDTH MODULATION - PWM control technique offers precise regulation and efficiency.
BUCK - Buck configuration allows for step-down voltage conversion.
0.65 mm - The small terminal pitch enables high-density mounting on a PCB.
6 V - The low minimum input voltage allows for operation with various power sources.
7.15 V - The nominal output voltage is ideal for many electronic devices.
75 V - The high maximum input voltage provides flexibility for different power sources.
Switching Regulators & Controllers LM5575QMHX/NOPB attributes and parameters. Explore more Switching Regulators & Controllers devices from Texas Instruments
Additional Features:
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Maximum Output Voltage:
Minimum Output Voltage:
Nominal Output Voltage:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
LM5575QMHX/NOPB Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
BAV99
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
4554
Jw Miller Magnetics
Other Semiconductors;
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NC7WZ17P6X
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
Won-top Electronics
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
STM8S003F3P6TR
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
LT1054CS8#PBF
Linear Technology
SWITCHED CAPACITOR REGULATOR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM3488MMX/NOPB
LM3488MMX/NOPB by Texas Instruments is a switching controller with current-mode control, operating at -40 to 125°C. It offers a max output voltage of 500V and max output current of 1A. Ideal for automotive applications, this IC features pulse width modulation and buck-boost switcher configuration.
SG3525AN
SWITCHING CONTROLLER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM5007SDX/NOPB
LM5007SDX/NOPB by Texas Instruments is a switching regulator with 8 terminals, operating at -40 to 125°C. It has a max output voltage of 73V and can handle up to 0.5A output current. Ideal for automotive applications due to its small size, high efficiency (800 kHz), and wide input voltage range of 9-75V.
LM22672MR-ADJ/NOPB
Switching Regulator or Controllers; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Form: GULL WING;
LT8641EUDC#TRPBF
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 18; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
LM22675MRX-ADJ/NOPB
Switching Regulator or Controllers; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Finish: MATTE TIN;
TPS54231DR
TPS54231DR by Texas Instruments is a switching regulator with 2A output current, 570kHz max switching frequency, and -40 to 150°C operating temp. Ideal for automotive applications due to its compact size, pulse width modulation control technique, and buck switcher configuration.
TPS60400DBVTG4
TPS60400DBVTG4 by Texas Instruments is a small outline, low profile switching regulator with a max output current of 0.06A and a max switching frequency of 350kHz. Ideal for industrial applications requiring an input voltage range from 1.8V to 5.25V and a min operating temperature of -40°C.
TPS54160ADRCR
TPS54160ADRCR by Texas Instruments is a switching regulator with 1.5A output current, 2500kHz max switching frequency, and 125°C max operating temp. Ideal for automotive applications, it operates b/w -40 to 125°C and supports input voltages from 3.5V to 60V.
IR1155STRPBF
International Rectifier
POWER FACTOR CONTROLLER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Supply Current (Isup): 13 mA;
MC33063AD
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
PTN78000WAH
PTN78000WAH by Texas Instruments is a switching regulator with a max output current of 3.2 A and a nominal output voltage of 5 V. It is commonly used in industrial applications that require pulse width modulation control and operate within a temperature range of -40 to 85 °C.
LM2596T-5.0/NOPB
Switching Regulator or Controllers; No. of Terminals: 5; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO; Qualification: Not Qualified;
L5970D
L5970D by STMicroelectronics is a MOS switching regulator with 2.25A output current and 280kHz switching frequency. Ideal for automotive applications, it operates b/w -40 to 125°C, supports input voltages from 4.4V to 36V, and uses pulse frequency modulation control technique.
LM22675MR-ADJ/NOPB
LM22675MR-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 500kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design in a small outline package.
AOZ1282CI-2
Alpha & Omega Semiconductor
SWITCHING REGULATOR; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
LMZ12002TZ-ADJ/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Qualification: Not Qualified; JESD-609 Code: e3; Maximum Switching Frequency: 1000 kHz;
LM46001PWPT
LM46001PWPT by Texas Instruments is a switching regulator with 1A output current, 28V max output voltage, and 2200kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design.
TPS61023DRLR
TPS61023DRLR by Texas Instruments is a switching regulator with 6 terminals, operating temp. range of -40 to 125°C, and PWM control mode. It has a boost switcher config., max output voltage of 5.5V, and is ideal for automotive applications due to its small size and high switching frequency up to 1MHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
LM5575MHX/NOPB
Switching Regulator or Controllers; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Package Equivalence Code: TSSOP16,.25;
LM5575MHX/NOPB by Texas Instruments is a switching regulator with 16 terminals, operating temperature range of -40 to 125°C, and output current up to 2.5A. It is ideal for automotive applications due to its compact size, pulse width modulation control technique, and buck switcher configuration.
LM5575QMHX/NOPB
Switching Regulator or Controllers; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE, THIN PROFILE, SHRINK PITCH;
LM5575MH/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: HTSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM5576MHX/NOPB
Switching Regulator or Controllers; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Switching Frequency: 545 kHz;
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 20; Package Code: HTSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM5574MTX/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM5574MT/NOPB
LM5574MT/NOPB by Texas Instruments is a switching regulator with a max output current of 0.5A and max output voltage of 70V, suitable for automotive applications. It operates b/w -40 to 125°C, featuring pulse width modulation control technique and buck switcher configuration. The package style is small outline with thin profile, ideal for surface mount assembly.
Switching Regulator or Controllers; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Pitch: .635 mm;
LM5576MH/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 20; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM5576MH/NOPB by Texas Instruments is a switching regulator with 3A output current, 70V max output voltage, and 500kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact design. Suitable for various power management needs in automotive systems.
LM5575MH
LM5574QMTX/NOPB
LM5574QMTX/NOPB by Texas Instruments is a switching regulator with a max output current of 0.5A and max output voltage of 70V, suitable for automotive applications. It operates b/w -40 to 125°C, featuring pulse width modulation control mode and buck switcher configuration. The package style is small outline with thin profile, making it ideal for space-constrained designs.
LM5575MHX
LM5575MHX by Texas Instruments is a current-mode switching regulator with a max output current of 2.5A and a max input voltage of 75V, suitable for automotive applications. It operates at temperatures ranging from -40°C to 125°C and has a compact package style with 16 terminals for surface mount assembly, making it ideal for space-constrained designs requiring efficient power management.
LM5575QMH
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved